排序方式: 共有64条查询结果,搜索用时 15 毫秒
1.
Mahmoud Rayan Seba Shadafny Adam Falah Mizied Falah Saleh Abu-Lafi Sare Asli Anwar Rayan 《Molecules (Basel, Switzerland)》2022,27(3)
A novel conjugate of docetaxel and biotin (designated as IDD-1010) was designed and chemically synthesized via an ester linkage at position 2’ carbon in docetaxel. The synthesized pure IDD-1010 exhibits a potent anti-cancer activity in in vitro and in vivo studies. At 10 nM, IDD-1010 has induced increased apoptosis and mitotic arrest of PC3-Luc prostate cancer cells, causing aneuploidy and cell death at higher concentrations. Toxicology studies indicate that the maximal tolerated dose (MTD) of IDD-1010 is 150 mg/kg in mice; equivalent to about 12.2 mg/kg of body weight, or to about an 850 mg dose for a patient weighing 70 kg. The MTD-treated mice exhibited weight gain similar to that of the control group, with no gross pathological signs at 14 days post-dosing. At a lower dose, IDD-1010 treatment did not lead to any significant weight loss in mice, although decreased the tumor volume stemming from injecting cancer cells into the dorsal loop of mouse prostate, and it was found to be more potent than Paclitaxel (reference drug). Similarly, IDD-1010 treatment significantly reduced tumor weight and thereby increased the percentage of mice survival as compared to reference drug-treated and control groups. To summarize, the described experiments using IDD-1010, as compared to the reference drug, strongly suggest a potential treatment utility with a wider therapeutic window for prostate cancer. Henceforth, clinical research on such a novel drug candidate would be greatly worthwhile. 相似文献
2.
The covalent conjugates of cellulase from Aspergillus niger were prepared with various molar ratios by using dextran. The conjugate (nE/nD: 1/5) showed higher activity than purified enzyme at all temperatures after 1 h of incubation and its activity could also be measured at higher temperature. Also, this conjugate lost only 60% activity in 2 h at 70°C in comparison to the purified enzyme, which lost all its activity. In addition, conjugation protected cellulase against denaturation in the presence of sodium dodecylsulfate (residual activity of about 80%) and inactivation by air bubbles (residual activity of about 50% for 4 h). 相似文献
3.
In this study, electrochemical degradation of microcrystalline cellulose (MCC) under hot-compressed water was investigated via application of constant voltage on reaction medium. Constant voltage ranges from 2.5 to 8.0 V was applied between anode (Titanium) and cathode (reactor wall). As an electrolyte and proton source 5–25 mM of H2SO4 was used. Reactions were carried out in a specially designed batch reactor (450 mL) made of T316 for 240 min at temperature of 200 °C.MCC decomposition products such as glucose, fructose, furfural, 5-HMF and levulinic acid were detected and quantified by High Performance Liquid Chromatography (HPLC). In the absence of electrolyte, applied voltage (2.5 and 4.0 V) decreased the total organic carbon (TOC) yield, in contrast at 8.0 V, TOC yield increased to 13%. Application of 8.0 V in hydrothermal conditions alter MCC decomposition pathway selectively to furfural (15%). Addition of electrolyte (5 mM, H2SO4) and application of 2.5 V potential increased TOC (54%) and changed the decomposition pathway in favor of 5-HMF (30%) and levulinic acid (21%). The structural changes in solid residues of electrochemically reacted MCC was analyzed by Fourier Transform Infrared Spectroscopy (FTIR) and found that MCC particles functionalized by carboxylic acid and sulfonated groups by the application of constant voltage to reaction medium. In the presence of electrolyte, under certain voltage (2.5 V), functionalization of solid particles became more obvious in FTIR spectrum results. Therefore, change in the selectivity values of degradation products were conducted with the functionalization of MCC particles due to applied voltage under sub-critical conditions. 相似文献
4.
In this work, we report a comprehensive theoretical investigation of electroactive star shaped pyrrole functionalized triazine monomer with two main goals. First goal of this work is to explore the physical and chemical properties of the monomer, then to investigate correlation between the experimental and the theoretical properties of monomer. The scale factor which is calculated from B3LYP/cc-pVDZ was determined as 0.985 for FT-IR and it is an important and reliable contribution to the literature. It is determined that the most appropriate basis set for this molecule. The other novel objective of this research is to investigate temperature effect on displacement of chlorine atoms in 2,4,6-trichloro-1,3,5-triazine. This method applied for the first time in the literature for triazines is especially crucial to the synthesis of unsymmetrical triazines. 相似文献
5.
The electrospinning of polymer-free nanofibers from highly concentrated (160%, w/v) aqueous solutions of hydroxypropyl-β-cyclodextrin (HPβCD) and its inclusion complexes with triclosan (HPβCD/triclosan-IC) was achieved successfully. The dynamic light scattering (DLS) and rheology measurements indicated that the presence of considerable HPβCD aggregates and the high solution viscosity were the key factors in obtaining electrospun HPβCD and HPβCD/triclosan-IC nanofibers without the use of any polymeric carrier. The HPβCD and HPβCD/triclosan-IC solutions containing 20% (w/w) urea yielded no fibers but only beads and splashes because of the depression of the self-aggregation of the HPβCD. The inclusion complexation of triclosan with HPβCD was studied by isothermal titration calorimetry (ITC) and turbidity measurements. The characteristics of the HPβCD and HPβCD/triclosan-IC nanofibers were investigated by Fourier transform infrared spectroscopy (FTIR), thermogravimetric analysis (TGA), X-ray diffraction (XRD), and differential scanning calorimetry (DSC). It was found that the electrospinning of HPβCD/triclosan-IC solution having a 1:1 molar ratio was optimal for obtaining nanofibers without any uncomplexed guest molecules. 相似文献
6.
A procedure for copper and nickel determination in scalp hair by solid sampling electrothermal atomic absorption spectrometric method was described. The hair samples (0.02 to 0.4 mg) were inserted directly on the platforms of solid sampling autosampler. The effects of pyrolysis temperature, atomization temperature, the amount of sample as well as addition of a modifier (Pd/Mg) and/or auxiliary digesting agents (hydrogen peroxide and nitric acid) and/or a surfactant (Triton X-100) on the determination of copper and nickel by solid sampling atomic absorption spectrometry were investigated. After optimization of parameters, the average recoveries of copper in two different certified reference hair samples were 105.7 and 97.6%. The recoveries of nickel in the both certified reference hair samples were in 95.2 and 96.4%. The limits of detection (3σ, N = 10) for copper and nickel were 22 ng/g and 35 ng/g, respectively. Heterogenous distribution of analyte in microscale for segmental analysis could be determined which is important to know that analyte quantity and time of poisoning of a person was exposed. For this purpose, 0.5 cm of pieces were cut along one or a few close strands and analyzed by solid sampling. This process could not be performed by wet-digestion method because 50 mg of sample is needed each time. Finally, the method was applied for the determination of copper and nickel concentrations in the hairs of different persons. 相似文献
7.
Gold nanoparticles (AuNPs) were used as a new chemical modifier for the determination of arsenic and antimony in salt solutions by electrothermal atomic absorption spectrometry. The AuNPs were prepared by reducing chloroauric acid with sodium citrate. The effects of pyrolysis and atomization temperatures, the amounts of interferents and modifier on the sensitivities of arsenic and antimony were investigated. As and Sb remain in the graphite tube up to 1,100°C, which is sufficient for the determination of the two metals in certified reference materials and spiked sea water samples within a 95% confidence level with low RSD (<10%). The detection limits (N?=?10 at 3??) for As and Sb in sea water are 2.3???g?L-1 and 3.0???g?L-1, respectively. Almost no background as well as a blank value was detected for AuNPs. Figure
Schematic illustration of the preparation of the TiO2@Au nanoparticles and modification with MUA 相似文献
8.
Abdul Q. Ramle Asli Karakas Abdul K. M. Arof Mustafa Karakaya Mehmet Taser Aysun Gozutok Chee Chin Fei Nurhidayatullaili M. Julkapli Wan J. Basirun 《Journal of heterocyclic chemistry》2020,57(10):3566-3573
Two new macrocyclic dibenzotetraaza[14]annulene (DBTAA) compounds with indolenine ( 5 ) and pyridoindolenine ( 6 ) moieties were synthesized and characterized by spectroscopy. Both DBTAAs exhibit strong UV-Vis absorption properties in the Soret band region. The theoretical second-order nonlinear optical property, electric dipole moment (μ), dispersion-free dipole polarizability (α) and first hyper-polarizability values were calculated by density functional theory and time dependent density functional theory. The ab-initio quantum mechanical calculation by time-dependent Hartree-Fock method was utilized to investigate the dynamic dipole polarizabilities, dynamic second-order, static, and dynamic third-order (γ) hyper-polarizabilities of the DBTAAs. The configuration interaction technique of all doubly occupied molecular orbitals possesses theoretically defined single-photon absorption (OPA) specifications for the examined structures. The computed maximum OPA wavelengths on both macrocyclic compounds coincide with the preceding measurement outcomes. 相似文献
9.
Maryam Sohaniyan Mahboobeh Manoochehri Maryam Daghighi Asli 《Journal of separation science》2019,42(23):3528-3534
An efficient and fast dispersive magnetic solid phase extraction method was developed using MIL‐101(Cr)/poly (mercaptobenzothiazole)@magnetite nanoparticles for the preconcentration and determination of nitrophenols in river and rain water samples. High‐performance liquid chromatography‐Ultraviolet instrument was applied for the analysis of target nitrophenols. The effect of several variables on the extraction performance was explored via design of experiment approach. Limits of detection and linear dynamic ranges were attained in the range of 0.05–0.10 µg/L and 0.2–250 µg/L, respectively. The enrichment factors were in the range of 317–363. The precision (n = 3) of dispersive magnetic solid phase extraction method was in the range of 5.3–6.8%. Eventually, the method was utilized for the analysis of target nitrophenols in river and rain water samples. 相似文献
10.
Asli Baysal Ceren Kuznek Mustafa Ozcan 《International journal of environmental analytical chemistry》2018,98(1):45-55
In this study, a challenging nanosorbent was described for preconcentration/separation method based on the sorption of cadmium, cobalt, copper, nickel, lead on starch coated titanium dioxide nanoparticles and its analysis by graphite furnace atomic absorption spectrometry. Optimum conditions were investigated for quantitative sorption. By using the proposed technique, the analyte elements were determined in spiked tap-water samples in the range of 95% confidence level. Limit of detection (3δ) was 0.05, 0.28, 1.90, 3.10 and 0.11 µg/L (3σ, N = 10) for cadmium, cobalt, copper, nickel and lead, respectively. The optimised technique is fast, easy handled, simple and environmental friendly. 相似文献