C-H functionalization logic in total synthesis

In this critical review, the strategic and economic benefits of C-H functionalization logic will be analyzed through the critical lens of total synthesis. In order to illustrate the dramatically simplifying effects this type of logic can potentially have on synthetic planning, we take the reader through a series of case studies in which it has already been successfully applied. In the first section, a chronological look at key historical syntheses will be examined, leading into modern day examples. In the second section, our own experience with applying and executing synthesis with a C-H functionalization "mindset" will be discussed (114 references).     

Physicochemistry of interaction between the cationic polymer poly(diallyldimethylammonium chloride) and the anionic surfactants sodium dodecyl sulfate, sodium dodecylbenzenesulfonate, and sodium N-dodecanoylsarcosinate in water and isopropyl alcohol-water media

The physicochemistry of interaction of the cationic polymer poly(diallyldimethylammonium chloride) (PDADMAC) with the anionic surfactants sodium dodecyl sulfate, sodium dodecylbenzenesulfonate, and sodium N-dodecanoylsarcosinate was studied in detail using tensiometry, turbidimetry, calorimetry, viscometry, dynamic light scattering (DLS), and scanning electron microscopy (SEM). Fair interaction initially formed induced small micelles of the surfactants and later on produced free normal micelles in solution. The interaction process yielded coacervates that initially grew by aggregation in the aqueous medium and disintegrated into smaller species at higher surfactant concentration. The phenomena observed were affected by the presence of isopropyl alcohol (IP) in the medium. The hydrodynamic sizes of the dispersed polymer and its surfactant-interacted species were determined by DLS measurements. The surface morphologies of the solvent-removed PDADMAC and its surfactant-interacted complexes from water and IP-water media were examined by the SEM technique. The morphologies witnessed different patterns depending on the composition and the solvent environment. The head groups of the dodecyl chain containing surfactants made differences in the interaction process.     

Two-dimensional surface properties of PEO-PPO-PEO triblock copolymer film at the air/water interface in the absence and presence of Tyr-Phe dipeptide, Val-Tyr-Val tripeptide, SDS and stearic acid

Two-dimensional surface properties of PEO-PPO-PEO triblock copolymer film (Mol.Wt. 2800) in the absence and presence of Tyr-Phe dipeptide, Val-Tyr-Val tripeptide, sodium dodecylsulfate and stearic acid have been investigated for the first time at the air/water interface using Langmuir film balance technique. It is observed that the above polymer forms fairly stable film at the air/water interface. There are no significant changes observed in the surface pressure-area (π-A) isotherms of polymer in the presence of SDS. However, more expanded film was formed in presence of SDS since the solubility of the polymer is more in SDS and the polymer network is disturbed in presence of SDS, which results in the increase in surface area of the polymer films. In the presence of dipeptide and tripeptide, the surface area of the polymer film decreased with a slight increase in the surface pressure indicating the binding of these peptides to polymer, which enhances the stability of the polymer film. Thermodynamic studies on the change in surface area (ΔA) and excess free energy of mixing (ΔG(mix)(E)) associated with the formation of the mixed film suggest the occurrence of a thermodynamically unstable mixed film. The presence of SDS slightly decreases the formation of mixed film of stearic acid with triblock copolymer and peptides due to the solubilization of these compounds in SDS. However, the hydrophobicity of the polymer films increases in the presence of stearic acid, leading to the increase in surface pressure. The positive deviation of ΔA and the positive ΔG(mix)(E) values show the non-ideality and incompatibility of thermodynamically unstable mixed films. The thermodynamic results suggest that the stability and compatibility of the polymer, peptides and their mixed films with stearic acid in the presence of SDS are decreased, which is in good agreement with the results obtained for other polymeric systems.     

Aggregation behavior and interaction of an amphiphilic drug imipramine hydrochloride with cationic surfactant cetyltrimethylammonium bromide: light scattering studies

The aggregation behavior and interaction of an amphiphilic antidepressant drug imipramine (IMP) hydrochloride with the cationic surfactant cetyltrimethylammonium bromide (CTAB) have been studied using light scattering (both static and dynamic) techniques. Due to rigid tricyclic hydrophobic moiety present in the molecule, the drug shows interesting association behavior. The static light scattering measurements show that the self-association of IMP commenced above a well-defined critical micellar concentration (CMC), which decreases with increasing the mole fraction of the CTAB surfactant. Both the excess Gibbs energy (ΔG(ex)) and the Gibbs energy of micellization (ΔG(M)°) are negative, and decrease with increasing mole fraction of the surfactant. The hydrodynamic diameters (d(h)) of the micellar aggregates were also evaluated using the dynamic light scattering measurements. The data indicate formation of larger aggregates by IMP and CTAB due to mixed micellization and subsequent micellar growth. The results have been analyzed using different models (viz., Clint, Motomura, Rosen, Rubingh, etc.) for mixed micelle formation.     

Performance of biodegradable microcapsules of poly(butylene succinate), poly(butylene succinate-co-adipate) and poly(butylene terephthalate-co-adipate) as drug encapsulation systems

Poly(butylene succinate) (PBSu), poly(butylene succinate-co-adipate) (PBSA) and poly(butylene terephthalate-co-adipate) (PBTA) microcapsules were prepared by the double emulsion/solvent evaporation method. The effect of polymer and poly(vinyl alcohol) (PVA) concentration on the microcapsule morphologies, drug encapsulation efficiency (EE) and drug loading (DL) of bovine serum albumin (BSA) and all-trans retinoic acid (atRA) were all investigated. As a result, the sizes of PBSu, PBSA and PBTA microcapsules were increased significantly by varying polymer concentrations from 6 to 9%. atRA was encapsulated into the microcapsules with an high level of approximately 95% EE. The highest EE and DL of BSA were observed at 1% polymer concentration in values of 60 and 37%, respectively. 4% PVA was found as the optimum concentration and resulted in 75% EE and 14% DL of BSA. The BSA release from the capsules of PBSA was the longest, with 10% release in the first day and a steady release of 17% until the end of day 28. The release of atRA from PBSu microcapsules showed a zero-order profile for 2 weeks, keeping a steady release rate during 4 weeks with a 9% cumulative release. Similarly, the PBSA microcapsules showed a prolonged and a steady release of atRA during 6 weeks with 12% release. In the case of PBTA microcapsules, after a burst release of 10% in the first day, showed a parabolic release profile of atRA during 42 days, releasing 36% of atRA.     

Protective Effect of Withania somnifera and Cardiospermum halicacabum Extracts Against Collagenolytic Degradation of Collagen

The irreversible destruction of extracellular matrix (ECM) such as cartilage, tendon, and bone that comprise synovial joints is the hallmark of both rheumatoid arthritis and osteoarthritis by over-expression of matrix metalloproteinase (MMP)-collagenases. We report herein the detailed study on the inhibitory effects of Withania somnifera extract (WSE) and Cardiospermum halicacabum extract (CHE) on Clostridium histolyticum collagenase (ChC) activity against the degradation of the ECM component of bovine Achilles tendon type I collagen by hydroxyproline assay method. Interaction of WSE and CHE with ChC exhibited 71% and 88% inhibition, respectively, to the collagenolytic activity of ChC against collagen degradation, and the inhibition was found to be concentration-dependent. The inhibition kinetics of ChC by both the extracts has been deduced from the extent of hydrolysis of N-[3-(2-furyl) acryloyl]-Leu-Gly-Pro-Ala. Both WSE and CHE are provided competitive and mixed type inhibition on ChC activity, respectively. Circular dichroism studies of ChC on treatment with WSE and CHE revealed changes in the secondary structure of collagenase. These results suggest that the WSE and CHE facilitated collagen stabilization through collagenase inhibition.     

Practical C-H functionalization of quinones with boronic acids

A direct functionalization of a variety of quinones with several boronic acids has been developed. This scalable reaction proceeds readily at room temperature in an open flask using inexpensive reagents: catalytic silver(I) nitrate in the presence of a persulfate co-oxidant. The scope with respect to quinones is broad, with a variety of alkyl- and arylboronic acids undergoing efficient cross-coupling. The mechanism is presumed to proceed through a nucleophilic radical addition to the quinone with in situ reoxidation of the resulting dihydroquinone. This method has been applied to complex substrates, including a steroid derivative and a farnesyl natural product.     

Synthesis, characterization and coordination properties of bis(alkyl)selenosalen ligands

New bis (alkyl) selenosalen podand ligands having Se2N2 donor sites have been synthesized by the condensation of unsymmetrical o-formylphenyl alkyl selenide (1-3) with ethylenediamine. The reaction of bis(alkyl)selenosalen podands with Pd(II) and Pt(II) afforded selenoether-selenolate coordination complexes 7-10via cleavage of one of the two Se-C(alkyl) bonds of bis(alkyl)selenosalen podands upon complexation. DFT calculations revealed that the cleavage of Se-C(alkyl) bonds occurred possibly via S(N)2 mechanism instead of a sequence of oxidative addition and reductive elimination reactions. The spectral data and elemental analyses confirmed the formation of selenoether-selenolate complexes. The structures of the podands N,N'-bis[(2-methylseleno)phenylmethylene]-1,2-ethanediamine (4), N,N'-bis[(2-decylseleno)phenylmethylene]-1,2-ethanediamine (5) and the selenoether-selenolate complex 8 have been determined by single crystal X-ray diffraction analysis. The crystal structure of 5 showed SeH interaction with a ladder like 3D supramolecular arrangement via interdigitation of long alkyl chains. Comparison of crystal packing of podands 4 and 5 indicates that the alkyl chain length has significant impact on the crystal packing. The platinum selenolate complex 8 shows a square planar arrangement around the Pt centre, where the Se atoms in the selenolate and the selenoether have nearly equal Pt-Se bond length.     

Ligand exchange chromatography: a vital dimension for the reliable characterization of heterocycles in crude oils and refined products

In the present study, we established a statistical distribution pattern of indigenous sulfur, nitrogen, and oxygen species in Arabian Heavy crude oil and its distilled fractions: naphtha, gas oil, and vacuum gas oil (VGO) using chemical derivatization with methyl iodide and subsequent characterization by positive electrospray Fourier transform mass spectrometry. It was observed that sulfur species for naphtha and gas oil were accumulated at lower double bond equivalent values and at lower carbon numbers compared to VGO, whereas crude oil encompassed a complete range of the sulfur species detected in all distilled fractions. Moreover, the use of alumina column chromatography and ligand exchange chromatography (LEC) on a palladium-bonded silica stationary phase revealed additional structural features of sulfur heterocycles in terms of condensed and non-condensed thiophenes. During LEC separation, in addition to sulfur heterocycles, interesting results were obtained for oxygen-containing compounds. Ortho-substituted alkyl phenols were separated from meta- and para-substituted alkyl phenols on a palladium-bonded silica stationary phase.     

A-optimal designs for an additive cubic model

Chan et al. (1998a) obtained A-optimal designs for an additive quadratic mixture model for q≥3 mixture components. In this paper, we obtain the A-optimal designs for an additive cubic model for q≥3 mixture components using the class of symmetric weighted centroid designs based on barycentres of various depths. We observe that barycentres of depths 0 and 2 are possible support points for an A-optimal design. We have also given the optimal weights of A-optimal designs for 3≤q≤17.