Cobalt titanate–cobalt oxide composite thin films deposited from heterobimetallic precursor

A single molecular heterobimetallic complex, [Co₂Ti(μ₃‐O)(TFA)₆(THF)₃] (1) [TFA = trifluoroacetate, THF = tetrahydrofuran], was synthesized, structurally and spectroscopically characterized and implemented as a single‐source precursor for the preparation of CoTiO₃–CoO composite thin films by aerosol‐assisted chemical vapour deposition (AACVD). The precursor complex was prepared by interaction of Co(OAc)₂.4H₂O [OAc = (CH₃COO^?)] with Ti(iso‐propoxide)₄ in the presence of trifluoroacetic acid in THF, and was analysed by melting point, CHN, FT‐IR, single‐crystal X‐ray diffraction and thermogravimetric analysis. The precursor complex thermally decomposed at 480 °C to give a residual mass corresponding to a CoTiO₃–CoO composite material. Good‐quality crystalline CoTiO₃–CoO composite thin films deposited at 500 °C by AACVD and characterized through powder X‐ray diffraction and scanning electron microscopy/energy‐dispersive X‐ray spectroscopy show that the crystallites have a rose‐flower‐like morphology with an average petal size in the range of 2–6 µm. Copyright © 2012 John Wiley & Sons, Ltd.     

Synthesis,characterization, and electroanalytical studies of Pb2+-selective polypyrrole-Zr(IV) phosphate ion exchange membrane

Journal of Solid State Electrochemistry - Polypyrrole-Zr(IV) phosphate (PPyZP) composite cation exchange material was synthesized by chemical oxidative polymerization of pyrrole with the help of...     

MHD Three-Dimensional Flow of Viscoelastic Fluid with Convective Surface Boundary Condition

This article reports the magnetohydrodynamic (MHD) three-dimensional flow of viscoelastic fluid over a stretching surface with heat transfer. Mathematical analysis is formulated using convective boundary conditions. Computations of dimensionless velocity and temperature fields are presented. The tabulated values show excellent agreement between present and previous limiting analysis. Graphical results show the impact of embedded parameters entering into the problem.     

Spectroscopic and morphological study of laser ablated Titanium

The optical characteristics of biological tissues sampled from the anterior abdominal wall of laboratory rats are for the first time experimentally studied in a wide wavelength range (350-2500 nm). The experiments have been performed in vitro using a LAMBDA 950 (PerkinElmer, United States) spectrophotometer. Inverse Monte Carlo simulation is used to restore the spectral dependences for scattering and absorption coefficients, as well as the scattering anisotropy factor for biological tissue based on the recorded spectra of diffuse reflection and total and collimated transmissions.     

Analytical and numerical solution for viscous dissipation effect on the heat transfer in a deformable channel

In this paper, shooting method and homotopy perturbation technique are applied for the flow analysis of temporal energy transport in a deformation channel with isothermal walls. An incompressible viscous fluid fills the space inside the channel. Analytical and numerical solutions are developed for the momentum and energy equations. The viscous dissipation effects are taken into account. Graphs for pertinent flow parameters are sketched and discussed. Comparison between the analytical and numerical solutions indicates an excellent agreement. It is noticed that behaviors of Prandtl and Eckert numbers on the temperature are qualitatively similar. Copyright © 2011 John Wiley & Sons, Ltd.     

Kinetic modeling of ZnO-rGO catalyzed degradation of methylene blue

Photodegradation of organic pollutants strongly depends on design of metal oxide semiconductor photocatalysts. Graphene, if composited with ZnO, can effectively enhance its photocatalytic performance for the eradication of pollutants from aqueous medium. Here in, ZnO-rGO is reported as highly active catalyst for degradation of methylene blue. A 200-mg/L solution of methylene blue dye was completely degraded within 1 h in comparison to 74% and 56% degradation over ZnO and rGO, respectively. The commonly used mechanisms of heterogeneous catalytic reactions, the Langmuir-Hinshelwood mechanism, and the Eley-Rideal mechanisms, were used to describe the reaction kinetics. The Langmuir-Hinshelwood mechanism was found as more favorable in this study. Apparent activation energy, E_ap, true activation energy, E_T, entropy, ΔS, and enthalpy, ΔH were calculated as 36.2 kJ/mol, 13.1 kJ/mol, 197.5 J/mol, and 23.1 kJ/mol, respectively.     

pH-Dependent Slipping and Exfoliation of Layered Covalent Organic Framework

Layered/two-dimensional covalent organic frameworks (2D COF) are crystalline porous materials composed of light elements linked by strong covalent bonds. Interlayer force is one of the main factors directing the formation of a stacked layer structure, which plays a vital role in the stability, crystallinity, and porosity of layered COFs. The as-developed new way to modulate the interlayer force of imine-linked 2D TAPB-PDA-COF (TAPB = 1,3,5-tris(4-aminophenyl)benzene, PDA = terephthaldehyde) by only adjusting the pH of the solution. At alkaline and neutral pH, the pore size of the COF decreases from 34 Å due to the turbostratic effect. Under highly acidic conditions (pH 1), TAPB-PDA-COF shows a faster and stronger turbostratic effect, thus causing the 2D structure to exfoliate. This yields bulk quantities of an exfoliated few/single-layer 2D COF, which was well dispersed and displayed a clear Tyndall effect (TE). Furthermore, nanopipette-based electrochemical testing also confirms the slipping of layers with increase towards acidic pH. A model of pH-dependent layer slipping of TAPB-PDA-COF was proposed. This controllable pH-dependent change in the layer structure may open a new door for potential applications in controlled gas adsorption/desorption and drug loading/releasing.     

Offline estimation of 2D crystal lattice parameters by processing the electron diffraction image

Electron diffraction provides useful information about the internal composition of materials and has been in the use of material scientists for more than fifty years. In order to extract useful information from offline diffraction images, they are manually analyzed by using some photometric technique. Manual analysis is however a cumbersome, laborious and difficult task. To reduce the labors of material scientists one can employ image processing techniques to perform automated analysis, due to the well established popularity and clear evidence of widely used image processing techniques. In this work an image processing technique is being proposed for the extraction of 2D unit cell information from diffraction images on one hand and finding the 2D point group contained by the lattices on the other. The technique employs a morphological shrinking operation to find the center of each spot in the underlying preprocessed diffraction image. This is followed by the extraction of eight points with reference to the spot produced by the transmitted electron beam. The resultant nine points, i.e. the extracted eight plus the reference spot generated by the transmitted electron beam, are then subjected to symmetry operations, rotation symmetry and mirror symmetry, in polar coordinate system, to classify the point group of the lattice produced by the electron diffraction. One of the difficult task, even in manual analysis, is to ascertain the exact spot where the transmitted electron beam hit the sample at the time of realization of the image. This has been accurately and intuitively done by employing the notion that the transmitted spot must have greater number of pixels, with the highest gray value, among the diffracted spots. The proposed strategy has been applied to a sample set of various images and the results shows that the technique is efficient in determining the unit cell in 2D and classify the point group with good accuracy.