Green synthesis of new naphthospiro chromanone scaffolds and their antimicrobial activity

An efficient synthesis of new naphthospiro chromanone scaffolds using ionic liquids as a green solvent under microwave irradiation is presented. The reaction was also studied under conventional elevated temperature conditions. The structures of newly synthesized compounds have been elucidated by means of IR, ¹H NMR, ¹³C NMR, and mass spectrometry data. All compounds were screened for their antimicrobial activity.     

Polysaccharide‐Based Oleogels Prepared with an Emulsion‐Templated Approach

The preparation and characterization of oleogels structured by using a combination of a surface‐active and a non‐surface‐active polysaccharide through an emulsion‐templated approach is reported. Specifically, the oleogels were prepared by first formulating a concentrated oil‐in‐water emulsion, stabilized with a combination of cellulose derivatives and xanthan gum, followed by the selective evaporation of the continuous water phase to drive the network formation, resulting in an oleogel with a unique microstructure and interesting rheological properties, including a high gel strength, G′>4000 Pa, shear sensitivity, good thixotropic recovery, and good thermostability.     

Formulation and evaluation of thermoreversible,mucoadhesive in situ intranasal gel of rizatriptan benzoate

The present study was aimed to formulate and evaluate in situ thermoreversible intranasal gel of an antimigraine drug rizatriptan benzoate. The poloxamer 407 and carbopol 934 were used as thermoreversible and mucoadhesive polymers respectively. The gels were prepared with cold method. The phase transition temperature was determined with visual method. The gels were evaluated for their pH, mucoadhesive strength, in vitro release and ex vivo drug permeation through goat nasal mucosa. The histopathological study of the nasal mucosa was carried out to check for its damage during drug permeation. The 18 % w/v poloxamer solution was found to be showing phase transition at physiologic conditions (34–35 °C). As the percentage of carbopol 934 was increased from 0.1 to 0.5 % w/v the gelling temperature was found to be decreased. All formulations were showing mucoadhesive strength above 4,000 dynes/cm². Drug permeation studies have indicated that the drug permeation rate can be increased by using carbopol 934 above 0.3 % w/v concentration. The histopathological evaluation of nasal mucosa after drug permeation study has not shown any evidence of damage. Thus in situ thermoreversible mucoadhesive gel of rizatriptan benzoate can be a promising approach to treat migraine.     

DABCO mediated one pot synthesis of 2-(3-benzyl-2, 6-dioxo-3, 6-dihydropyrimidin-1[2H]-yl)-N-(4-(1, 3-dioxo-1H-benzo [de]isoquinolin-2[3H]-yl) aryl) acetamides as antimicrobial agents

We report herein DABCO mediated one pot synthesis of 2-(3-benzyl-2, 6-dioxo-3,6-dihydropyrimidin-1[2H]-yl)-N-(4-(1,3-dioxo-1H-benzo[de]isoquinolin-2[3H]-yl) aryl) acetamides ( 4a-j ). The silent features of this new one pot synthesis include the shorter reaction time, high yields, simple workup, and simultaneous formation of N-Amide and N-benzyl bonds in the one pot. The newly synthesized compounds ( 4a-j ) were characterized by different spectral techniques such as IR, ¹H-NMR, ¹³C-NMR, HRMS. All the synthesized compounds were evaluated for their anti-bacterial and anti-fungal activities. The anti-bacterial activities results reveal that the compounds 4a , 4g , 4i , and 4j are most active against S. aureus. In the case of B. subtilis the compounds 4a , 4i , and 4j are found to be most active. The compounds 4c , 4e , 4i , and 4j are most active against E. coli. In the case of P. aeruginosa 4a , 4i & 4j are found to be more active. On the other hand, the anti-fungal activity result shows that the compounds 4d , 4f , 4i , and 4j are more active against A. niger. The compounds 4a , 4d , 4i , and 4j are found to be more active against C. albicans.     

Ethylene propylene diene monomer rubber‐based heat shielding materials for solid rocket motor: Impact of Kevlar fiber reinforcement on the thermal and mechanical properties

This work scrutinizes the utilization of ethylene propylene diene monomer rubber matrix (EPDM) with an embodiment of aramid fiber for the heat shielding applications in solid rocket motor (SRM). Aramid fibers are aromatic poly‐paraphenylene terephthalamide, here deployed are Kevlar fibers (KF). However, the literature that encompasses the thermal and mechanical behavior with the fiber loading is reported nowhere else. The effect of fiber addition on the surface morphology and density was thoroughly studied, and it revealed that the EHSMs were of lower density to act as an efficient payload for the SRM. In this regard, the thermal conductivity, heat capacity, thermal diffusivity, fire behavior, and mechanical properties of the EPDM/KF‐based EHSMs were explored. The results revealed that the EHSMs are thermally insulating and thermally stable material with balanced mechanical properties that can engender the thermal and mechanical strains of the rocket motor. Furthermore, other analytical techniques such as scanning electron microscopy and energy dispersive X‐ray spectroscopy have been exploited to monitor the performance of the char residues of the EHSM to delineate its performance in the fire atmosphere.     

Trace determination of parabens in cosmetics and personal care products using fabric‐phase sorptive extraction and high‐performance liquid chromatography with UV detection

A simple, fast, and sensitive analytical protocol using fabric‐phase sorptive extraction followed by high performance liquid chromatography with ultraviolet detection has been developed and validated for the extraction of five parabens including methylparaben, ethylparaben, propylparaben, butylparaben, and benzylparaben. In the present work, sol‐gel polyethylene glycol coated fabric‐phase sorptive extraction membrane is used for the preconcentration of parabens (polar) from complex matrices. The use of fabric‐phase sorptive extraction membrane provides a high surface area which offers high sorbent loading, shortened equilibrium time, and overall decrease in the sample preparation time. Various factors affecting the performance of fabric‐phase sorptive extraction, including extraction time, eluting solvent, elution time, and pH of the sample matrix, were optimized. Separation was performed using a mobile phase consisting of water:acetonitrile (63:37; v/v) at an isocratic elution mode at a flow rate of 0.9 mL/min with wavelength at 254 nm. The calibration curves of the target analytes were prepared with good correlation coefficient values (r² > 0.9955). The limit of detection values range from 0.252 to 0.580 ng/mL. Finally, the method was successfully applied to various cosmetics and personal care product samples such as rose water, deodorant, hair serum, and cream with extraction recoveries ranged between 88 and 122% with relative standard deviation <5%.     

Physical properties and processing conditions correlations of the ldpe/lldpe tubular blown films

Experiments are carried out to verify a theory developed to correlate the strain history of the polymer during film blowing to the ultimate physical properties of the film. The theory predicts that the amount of strain put into the film once it starts to freeze, defined as strain in the amorphous region and the plastic strain, has a dominant effect on the film properties. Two grades of low and linear low density polyethylene, experimental resins supplied by Mobil chemical company, were used to produce the blown film yielding a 1.25 mil film at the for all experimental runs. Film surface and bulk temperatures, along the machine direction and around the bubble, were measured using the infra-red techniques to identify the points where film starts to crystallize. A video digitization technique was used to measure the bubble kinematics. Film properties were measured using standard ASTM methods. The results indicate a correlation between the amount of strain and a measure of stress with ultimate physical properties of the blown film. This principle leads to the correlation of both the machine and transverse film properties on the same surface. The results obtained can potentially be exploited by designing the blown-film equipment and processing conditions such that optimal bubble stretching produces desired film properties.     

Cerium vanadate/carbon nanotube hybrid composite nanostructures as a high-performance anode material for lithium-ion batteries

The pristine CeVO4 and CeVO4/CNT hybrid composite nanostructured samples were facilely synthesized using a simple silicone oil-bath method.From the X-ray diffra...     

Determination of organophosphate pesticides at a carbon nanotube/organophosphorus hydrolase electrochemical biosensor

An amperometric biosensor for oganophosphorus (OP) pesticides based on a carbon nanotube (CNT)-modified transducer and an organophosphorus hydrolase (OPH) biocatalyst is described. A bilayer approach with the OPH layer atop of the CNT film was used for preparing the CNT/OPH biosensor. The CNT layer leads to a greatly improved anodic detection of the enzymatically generated p-nitrophenol product, including higher sensitivity and stability. The sensor performance was optimized with respect to the surface modification and operating conditions. Under the optimal conditions the biosensor was used to measure as low as 0.15 μM paraoxon and 0.8 μM methyl parathion with sensitivities of 25 and 6 nA/μM, respectively.