RP-HPLC method for simultaneous estimation of lamivudine, tenofovir disoproxil fumarate and efavirenz in tablet formulation

A simple, rapid, and precise reversed-phase high-performance liquid chromatographic method for the simultaneous determination of lamivudine, tenofovir disoproxil fumarate and efavirenz in bulk and tablet dosage form has been developed and validated. Chromatography was performed on a 150 mm × 4.6 mm i.d., 5-μm particle, Phenomenex Luna C₁₈ column with 30: 45: 25 (v/v/v) acetonitrile: methanol: water as mobile phase at a flow rate of 0.5 mL/min. UV detection was done at 258 nm; lamivudine, tenofovir disoproxil fumarate and efavirenz were eluted with retention times of 3.27, 4.58 and 10.90 min, respectively. The method was validated in accordance with ICH guidelines. Validation revealed the method is specific, rapid, accurate, precise, reliable and reproducible. Calibration plots were linear over the concentration ranges 1–6 μg/mL for lamivudine and tenofovir disoproxil fumarate and 2–12 μg/mL for efavirenz. Limits of detection were 0.05, 0.09 and 0.11 μg/mL and limits of quantification were 0.15, 0.28 and 0.34 μg/mL for lamivudine, tenofovir disoproxil fumarate and efavirenz, respectively. The high recovery and low coefficients of variation confirm the suitability of the method for the simultaneous determination of these three drugs in bulk and tablets.     

rmpM Genosensor for Detection of Human Brain Bacterial Meningitis in Cerebrospinal Fluid

Human brain bacterial meningitis is a life-threatening disease caused mainly by Neisseria meningitidis, lead to damage of the outer membrane covering (meninges) of brain or even death. The usual methods of diagnosis are either time-consuming or have some limitations. The specific rmpM (reduction-modifiable protein M) virulent gene based genosensor is more sensitive, specific, and can detect N. meningitidis directly from the patient cerebrospinal fluid in 30 min including 1-min response time. 5′-Thiol-labeled single-stranded DNA (ssDNA) probe was immobilized onto screen-printed gold electrode (SPGE) and hybridized with denatured (95 °C) single-stranded genomic DNA (ssG-DNA) for 10 min at 25 °C. The electrochemical response was measured by cyclic voltammetry, differential pulse voltammetry (DPV) and electrochemical impedance using redox indicators. The sensitivity of the genosensor was 9.5087?(μA/cm²)/ng with DPV and limit of detection was 3 ng/6 μL ssG-DNA. The immobilization of the ssDNA probe and hybridization with ssG-DNA from N. meningitidis was characterized by atomic force microscopy and Fourier transform infrared spectroscopy. The rmpM genosensor was stable for 6 months at 4 °C with 10 % loss in initial DPV current. The advantage of rmpM genosensor is to detect bacterial meningitis simultaneously in multiple patients using SPGE array during an outbreak of the disease.     

Carbon Nanotubes-Based Label-Free Affinity Sensors for Environmental Monitoring

Nanostructures, such as nanowires, nanobelts, nanosprings, and nanotubes, are receiving growing interest as transducer elements of bio/chemical sensors as they provide high sensitivity, multiplexing, small size, and portability. Single-walled carbon nanotubes (SWNTs) are one such class of nanostructure materials that exhibit superior sensing behavior due to its large-surface carbon atoms that are highly responsive to surface adsorption events. Further, their compatibility with modern microfabrication technologies and facile functionalization with molecular recognition elements make them promising candidates for bio/chemical sensors applications. Here, we review recent results on nanosensors based on SWNTs modified with biological receptors such as aptamers, antibodies, and binding proteins, to develop highly sensitive, selective, rapid, and cost-effective label-free chemiresistor/field-effect transistor nanobiosensors for applications in environmental monitoring.     

Use of NAD(P)H Fluorescence Measurement for On-Line Monitoring of Metabolic State of Azohydromonas australica in Poly(3-hydroxybutyrate) Production

Culture fluorescence measurement is an indirect and non-invasive method of biomass estimation to assess the metabolic state of the microorganism in a fermentation process. In the present investigation, NAD(P)H fluorescence has been used for on-line in situ characterization of metabolic changes occurring during different phases of batch cultivation of Azohydromonas australica in growth associated poly(3-hydroxybutyrate) or PHB production. A linear correlation between biomass concentration and net NAD(P)H fluorescence was obtained during early log phase (3–12 h) and late log phase (24–39 h) of PHB fermentation. After 12 h (mid log phase) cultivation PHB accumulation shot up and a drop in culture fluorescence was observed which synchronously exhibited continuous utilization of NAD(P)H for the synthesis of biomass and PHB formation simultaneously. A decrease in the observed net fluorescence value was observed again towards the end of fermentation (at 39 h) which corresponded very well with the culture starvation and substrate depletion towards the end of cultivation inside the bioreactor. It was therefore concluded that NAD(P)H fluorescence measurements could be used for indication of the time of fresh nutrient (substrate) feed during substrate limitation to further enhance the PHB production.     

Synthesis of zirconium diboride and its application in the protection of stainless steel surface in harsh environment

Journal of Solid State Electrochemistry - Surface degradation of steel is one of the key problems of steel end user because of the electrochemical reaction at the steel surface caused by...     

Design,Synthesis, and Biological Activity of New Bis-1,2,3-triazole Derivatives Bearing Thiophene-Chalcone Moiety

Russian Journal of General Chemistry - A series of novel 1,4-substituted bis-aralkyl and aryl 1,2,3-triazoles bearing thiophene chalcones are synthesized via the Claisen condensation of bis...     

Stability‐indicating HPLC method for simultaneous quantification of 14 impurities in excedrin tablet formulations and identification of new impurity by LC–MS in accelerated stability studies

We developed novel stability‐indicating HPLC method for simultaneous estimation of 14 impurities in excedrin tablet, a formulation with a combination of acetaminophen, aspirin, and caffeine. In addition, a new impurity that was generated through degradation of aspirin at high temperatures during the accelerated stability conditions was positively identified and confirmed, using liquid chromatography–mass spectrometry technique. The HPLC method was optimized using the Inertsustain C₁₈, 250 × 4.6 mm, 5.0 μm column, employing simple gradient method. Forced degradation studies were performed under acidic, basic, oxidative and thermal conditions to prove the scope and stability‐indicating the nature of the method. The optimized method was validated as per the International Conference on Harmonization guidelines. The HPLC method showed linearity from LOQ concentration to 21 μg mL^?1. Precision and intermediate precision values were <5% RSD. The validated HPLC method is currently applied for the routine testing of excedrin tablet formulations in quality control laboratories.     

Crystal structure and DFT analyses of a pentacoordinated PCP pincer nickel(II) complex

The reaction of NiCl₂ with 1,3‐bis[(diphenylphosphanyl)methyl]hexahydropyrimidine in the presence of 2,6‐dimethylphenyl isocyanide and KPF₆ afforded a new pentacoordinated PCP pincer Ni^II complex, namely {1,3‐bis[(diphenylphosphanyl)methyl]hexahydropyrimidin‐2‐yl‐κN²}(2,6‐dimethylphenyl isocyanide‐κC)nickel(II) hexafluoridophosphate 0.70‐hydrate, [Ni(C₉H₉N)(C₃₀H₃₀ClN₂P₂)]PF₆·0.7H₂O or [NiCl{C(NCH₂PPh₂)₂(CH₂)₃‐κ³P,C,P′}(Xylyl‐NC)]PF₆·0.7H₂O, in very good yield. Its X‐ray structure showed a distorted square‐pyramidal geometry and the compound does not undergo dissociation in solution, as shown by variable‐temperature NMR and UV–Vis studies. Density functional theory (DFT) calculations provided an insight into the bonding; the nickel dsp²‐hybridized orbitals form the basal plane and the nearly pure p orbital forms the axial bond. This is consistent with the NBO (natural bond orbital) analysis of analogous nickel(II) complexes.     

An Efficient Procedure for the Preparation of 3′-Acetyl-2′,3′-dihydrobenzothiazoles by Ring Contraction of 2′,3′-Dihydro-1,5-Benzothiazepines Under Acetylating Conditions

Reaction of 2-benzoyl-6-hydroxy-3-methyl-5-(2′-substituted-2′,3′-dihydro-1,5-benzothiazein-4′-yl) benzofurans (4a-f) with a mixture of acetic anhydride and pyridine afforded 6-acetoxy-2-benzoyl-3-methyl-5-(3′-acetyl-2′-substitutedstyryl-2′,3′-dihydrobenzothiazole-2′-yl) benzofurans (5a-f) as sole products in good yields. A reaction mechanism for the ring contraction is proposed. All the compounds (5a-f) were screened for their antifeedant activity by the “Non-Choice test method” using 6 h prestarved fourth instar larvae of Spodoptera litura F. Compounds 5a, 5c and 5d exhibited highest antifeedant activity.