Palladium-catalyzed regioselective oxidative amination of alkenes: an efficient route to the synthesis of pyrrolocoumarin and pyrroloquinolone derivatives

Palladium-catalyzed IBX-induced intramolecular oxidative amination of alkenes has been utilized for the synthesis of pyrrolocoumarin and pyrroloquinolone derivatives in excellent yields in a short reaction time.     

Asymmetric reductive ring-opening of bicyclic olefins catalyzed by palladium and nickel complexes

[reaction: see text] Asymmetric reductive ring opening of oxa- and azabenzonorbornadienes with organic acids and zinc powder under mild conditions catalyzed by Ni(binap)Cl(2) or Pd(binap)I(2) produces the corresponding 1,2-dihydronaphth-1-ols in good to excellent yields with high enantioselectivity.     

Studies on addition polymerization in mixed solvent system. Part I. Chain transfer of water in polymerization of methyl methacrylate

The role of water as a chain-transfer agent in addition polymerization of methyl methacrylate and acrylamide in a mixed solvent system was studied. Water does not have any transfer with the growing polymer radical. The degree of polymerization is found to increase with increasing water concentration. This is probably due to a reduced termination rate resulting from coiling of the polymer chain in the presence of a nonsolvent like water.     

Mechanistic Studies on Rhodium(III) Chelates Aquation of Cis-Dinitrobisbiguaniderhodium(III) Nitrate

Aquation of cis-dinitrobisbiguaniderhodium (III) nitrate was investigated conductometrically. Rates of the release of first and the second nitro groups were derived by a graphical method. For both the steps of aquation, the presence of electron accepting ‘nitro’ group, favours ‘bond formation’ by the incoming ligand in the transition stage and it occurs before the ‘bond rupture’ is complete. The loss of the second ‘nitro’ group most probably takes place along with a hydrogen ion from the ‘aquo’ ligand introduced in the first step of aquation with the resultant formation of the hydroxoaquobisbiguanide complex. Activation parameters were evaluated and are as follows: ΔH? are 18±1.2 and 18.6±1.1 k cals mole^?1 and ΔS? are ?15±2.7 and ?19±2.3 e. u. respectively for the first and the second steps of aquation.     

Metal chelates in vinyl polymerization. I. Ferric dipivaloylmethide as an initiator

The behavior of the chelate, ferric dipivaloylmethide, Fe(DPM)₃, in vinyl polymerization systems was investigated. The polymerization was found to be of free-radical nature. The rate of polymerization was proportional to the square root of the concentration of the chelate. The monomer exponent was close to 1.5 for the Fe(DPM)₃-initiated polymerization of styrene and methyl methacrylate. The kinetic and transfer constants and activation energies for these systems have been evaluated. Spectral studies revealed the possibility of a complex formation between the chelate and the monomer. A kinetic scheme for the Fe(DPM)₃-initiated polymerization is derived based on this initial complex formation.     

Vibrational coupling in carboxylic acid dimers

The vibrational level splitting in the ground electronic state of carboxylic acid dimers mediated by the doubly hydrogen-bonded networks are investigated using pure and mixed dimers of benzoic acid with formic acid as molecular prototypes. Within the 0-2000-cm(-1) range, the frequencies for the fundamental and combination vibrations of the two dimers are experimentally measured by using dispersed fluorescence spectroscopy in a supersonic jet expansion. Density-functional-theory calculations predict that most of the dimer vibrations are essentially in-phase and out-of-phase combinations of the monomer modes, and many of such combinations show significantly large splitting in vibrational frequencies. The infrared spectrum of the jet-cooled benzoic acid dimer, reported recently by Bakker et al. [J. Chem. Phys. 119, 11180 (2003)], has been used along with the dispersed fluorescence spectra to analyze the coupled g-u vibrational levels. Assignments of the dispersed fluorescence spectra of the mixed dimer are suggested by comparing the vibronic features with those in the homodimer spectrum and the predictions of density-functional-theory calculation. The fluorescence spectra measured by excitations of the low-lying single vibronic levels of the mixed dimer reveal that the hydrogen-bond vibrations are extensively mixed with the ring modes in the S1 surface.     

Temperature variation of DC conductivity of poly(3-alkyl thiophenes) and their cocrystals

The dc conductivity of poly(3-alkyl thiophenes) (P3ATs) and their cocrystals are measured in the temperature range of -130 to 150 degrees C. Both solvent-cast films and the melt-cooled films are used. The former exhibit a sharp increase followed by a decrease in conductivity, whereas the latter show only a sigmoidal increase in conductivity with temperature. The sigmoidal increase of the melt-cooled samples is dependent on the regioregularity and alkyl chain length of the samples and is explained from the solid-state transformation of the interdigited type-II crystal to a noninterdigited type-I crystal. The type-I crystal itself has lower conductivity than type-II crystals, and the samples exhibit a blue shift in UV-vis absorption spectra with an increase in temperature. So the sigmoidal increase of conductivity is attributed to the increase in carrier mobility with temperature in the type-I crystals. The X-ray and DSC results suggest that during the transformation of type-II to type-I crystals with increasing temperature, localized crystallites of smaller dimensions separated by narrower amorphous portions are produced throughout the whole matrix. But in the type-II polymorph, the crystallites are large with a wider gap in between. The sigmoidal increase is attributed to the easier hopping of the charge carrier among the localized crystallites of the type-I crystal with increasing temperature. In the cocrystals, the smaller sigmoidal increase with increasing irregular sample concentration is valid for a lower concentration of such localized crystallites. The same is true for cocrystals with longer alkyl chain lengths. The interfibrillar contribution of conductivity through the network junctions together with the carrier hopping between the localized crystallites might be a possible reason for the metallic-type behavior of solvent-cast samples after a certain temperature. The melt-cooled films do not exhibit metallic-type behavior because of the absence of a fibrillar network morphology.     

Intrinsic Dimension Estimation-Based Feature Selection and Multinomial Logistic Regression for Classification of Bearing Faults Using Compressively Sampled Vibration Signals

As failures of rolling bearings lead to major failures in rotating machines, recent vibration-based rolling bearing fault diagnosis techniques are focused on obtaining useful fault features from the huge collection of raw data. However, too many features reduce the classification accuracy and increase the computation time. This paper proposes an effective feature selection technique based on intrinsic dimension estimation of compressively sampled vibration signals. First, compressive sampling (CS) is used to get compressed measurements from the collected raw vibration signals. Then, a global dimension estimator, the geodesic minimal spanning tree (GMST), is employed to compute the minimal number of features needed to represent efficiently the compressively sampled signals. Finally, a feature selection process, combining the stochastic proximity embedding (SPE) and the neighbourhood component analysis (NCA), is used to select fewer features for bearing fault diagnosis. With regression analysis-based predictive modelling technique and the multinomial logistic regression (MLR) classifier, the selected features are assessed in two case studies of rolling bearings vibration signals under different working loads. The experimental results demonstrate that the proposed method can successfully select fewer features, with which the MLR-based trained model achieves high classification accuracy and significantly reduced computation times compared to published research.     

Functional group dependent site specific fragmentation of molecules by low energy electrons

Functional group dependence is observed in the dissociative electron attachment (DEA) to various organic molecules in which the DEA features seen in the precursor molecules of the groups are retained in the bigger molecules. This functional group dependence is seen to lead to site-selective fragmentation of these molecules at the hydrogen sites. The results are explained in terms of the formation of core-excited Feshbach resonances. The results point to a simple way of controlling chemical reactions as well as interpreting the DEA data from bigger biological molecules.     

Biomolecular hybrid of a conducting polymer with DNA: morphology, structure, and doping behavior

A poly(o-methoxyaniline) (POMA)/DNA [weight fraction of DNA (W(DNA)) = 0.45] hybrid was prepared by mixing their solutions in sterilized double distilled water. The solution turned green upon aging for a longer time, and the doping of POMA by DNA was complete after about 15 d of aging. The doping was confirmed from the UV-vis spectra where the 599 nm peak of POMA(EB) disappeared and a new peak for a pi to localized polaron band-transition appeared. With increasing aging time the new peak gradually shifted from 674 nm at 3 h to 820 nm at 15 d of mixing and thereafter it remained constant. The absence of a free carrier tail in the UV-vis spectra indicated a coiled structure of POMA in the complex. Circular dichroism spectra of the hybrid solution indicated that the DNA conformation (double helical structure) remained unchanged in the hybrid. The SEM micrograph of the freeze-dried hybrid showed a needle-like morphology of the DNA dispersed in a polymer matrix and it was completely different from the fibrillar network morphology of pure DNA in the solid state. The TEM micrograph indicated a homogeneous dispersion of DNA fibrils in the POMA matrix. The melting temperature of the POMA-DNA hybrid showed an increase compared to that of pure DNA by 5 degrees C, probably caused by an electrostatic interaction between the DNA anion and the POMA radical cation generated in the doping process. WAXS investigations revealed that the DNA crystal structure remained unchanged in the hybrid whereas the POMA crystal structure might be lost. An FT-IR study suggested that interaction occurred between the phosphoric acid group of DNA and a nitrogen atom of POMA through proton transfer from the OH group of the former. A schematic model of the POMA-DNA complex randomly anchoring POMA chains with the DNA molecule was proposed. The dc conductivity of the POMA-DNA complex was found to be ca. 10(-7) S . cm(-1). Hence, this work describes a procedure for making a DNA-conducting polymer hybrid without changing the conformation and structure of DNA. [Diagram: see text]