Beiträge zum chemischen Transport oxidischer Metallverbindungen. V. Der Transport ternärer und quaternärer Mischferrite über ihre Metallchloride

Contributions to the Chemical Transport of Metal Oxides. V. Transport of Ternary and Quaternary Mixed Ferrites by their Chlorides The transport by means of HCl as transporting gas in a closed system in the case of the ternary mixed ferrites (Ni_0,8Fe_2,2O₄, Mn_0,75Fe_2,25O₄, Mn_1,286Fe_1,714O₄) and the quaternary mixed ferrites (Mg_0,5Mn_0,5Fe₂O₄, Mg_0,75Mn_0,536Fe_1,714O₄, Mg_0,281Mn_0,469Fe_2,25O₄, Mn_0,5Zn_0,5Fe₂O₄, Mn_0,5Zn_0,45Fe_2,05O₄, Ni_0,5Zn_0,5Fe₂O₄) between T₂ = 1100?1000°C and T₁ = 1000?800°C was investigated. Transported crystals were characterized by chemical analysis and the saturation magnetization, the transport rate has been checked. In the case of Mn_0,5Zn_0,45Fe_2,05O₄ two phases were transported. By discussing the phase diagram an explanation is given.     

Zur Reaktion des Germaniums mit Germaniumtetrachlorid und zur Existenz der Oxidchloride GeOCl2 und GeOCl6 im Gleichgewicht

On the Reaction of Germanium with Germanium Tetrachloride and on the Existence of the Oxidechlorides GeOCl₂ and GeOCl₆ at the Equilibrium The above equilibrium was measured in a Gauge-manometer and the enthalpy of formation and the entropy for GeCl₂,g were derived from these results. From total pressure measurements and transport experiments of GeO₂ with GeCl₄ follows, that the oxidechlorides Ge₂OCl₆ and GeOCl₂ are not present in measurable concentrations, that means the enthalpy of formation of GeOCl₂ must be higher than ?327 kJ · mol^?1.     

Peroxofluorokomplexe der Übergangsmetalle. IX. Kristallstruktur von Ba3[Ti(O2)F5]2 · 2 H2O

Transition Metal Peroxofluoro Complexes. IX. Crystal Structure of Ba₃[Ti(O₂)F₅]₂ · 2 H₂O The pale yellow hydrat Ba₃[Ti(O₂)F₅]₂ · 2 H₂O crystallizes tetragonal (space group P4₂/mbc, a = 1 248.5(3), c = 812.2(2) pm; Z = 4; R = 0.026 for 404 independent reflections). It contains isolated [Ti(O₂)F₅]^3? anions. Thermal decomposition leads directly to α-Ba₃Ti₂O₂F₁₀, which is isotypic to α-Ba₃Al₂F₁₂.     

Contact angle hysteresis, adhesion, and marine biofouling

Adhesive and marine biofouling release properties of coatings containing surface-oriented perfluoroalkyl groups were investigated. These coatings were prepared by cross-linking a copolymer of 1H,1H,2H,2H-heptadecafluorodecyl acrylate and acrylic acid with a copolymer of poly(2-isopropenyl-2-oxazoline) and methyl methacrylate at different molar ratios. The relationships between contact angle, contact angle hysteresis, adhesion, and marine biofouling were studied. Adhesion was determined by peel tests using pressure-sensitive adhesives. The chemical nature of the surfaces was studied by using X-ray photoelectron spectroscopy. Resistance to marine biofouling of an optimized coating was studied by immersion in seawater and compared to previous, less optimized coatings. The adhesive release properties of the coatings did not correlate well with the surface energies of the coatings estimated from the static and advancing contact angles nor with the amount of fluorine present on the surface. The adhesive properties of the surfaces, however, show a correlation with water receding contact angles and contact angle hysteresis (or wetting hysteresis) resulting from surface penetration and surface reconstruction. Coatings having the best release properties had both the highest cross-link density and the lowest contact angle hysteresis. An optimized coating exhibited unprecedented resistance to marine biofouling. Water contact angle hysteresis appears to correlate with marine biofouling resistance.     

Synthesis of Cannabinoid Model Compounds. Part 3. (6aR, 10aR)-N-ethyl-Δ8-tetrahydrocannabinol-18-amide, (6aR, 10aR, 17 RS)-N-ethyl-17-methyl-Δ8- tetrahydrocannabinol-18-amide and (6aR, 10aR)-17,18-didehydro-Δ8-tetrahydrocannabinol

The novel cannabinoids (6aR, 10aR)-N-ethyl-Δ⁸-tetrahydrocannabinol-18-amide (15) and (6aR, 10aR, 17 RS)-N-ethyl-17-methyl-Δ⁸- tetrahydrocannabinol-18-amide (16) , designed as cannabinoid affinity ligands, were synthesized from the corresponding acids 11 and 12 via the N-hydroxysuccinimide esters. Amide 16 was tested in the rat and was generalized to Δ⁹-tetrahydrocannabinol, being 5 times less potent than the training drug. An improved synthesis of (6aR, 10aR)-17,18-didehydro-Δ⁸-tetrahydrocannabinol (23) is reported. As model reaction for the preparation of a tritiated Δ⁸-tetrahydrocannabinol, compound 23 was selectively deuterated at C(17) and C(18) in benzene/Et₃N using [(C₆H₅)₃P]₃RuCl₂ as catalyst.     

d,h-m̈-Alkoxoalkylphosphonato-e-m̈-alkoxo-f-m̈-oxo-bis[trichloroantimon(V)]-Verbindungen

d,h-m?-Alkoxoalkylphosphonato-e-m?-alkoxo-f-m?-oxo-bis[trichloroantimony(V)] Compounds The binuclear antimony(V) complexes Cl₃Sb(O)[R³(R¹O)PO₂](OR²)SbCl₃ 1 to 7 with R¹, R² and R³ = Me or Et in solution slowly exchanges the R² groups between the equatorial oxygen atoms of the Sb₂O₂ ring. The SbO(3)PO(3)Sb ringsystem makes rapid pseudorotation. The resulting isomeres are detected by nmr spectroscopy.     

Acyl- und Alkylidenphosphane. XXVII [I.]. Molekül- und Kristallstruktur des Methyl[(N-phenyl,N-tri-methylsilyl)thiocarbamoyl]trimethylsilylphosphans

Acyl- and Alkylidenephosphines. XXVII. Molecular and Crystal Structure of Methyl-[(N-phenyl, N-trimethylsilyl)thiocarbamoyl]trimethylsilylphosphine . Methyl[(N-phenyl, N-trimethylsilyl)thiocarbamoyl]trimethylsilylphosphine 1a formed via an addition of methylbis(trimethylsilyl)phosphine to phenyl isothiocyanate [1], crystallizes in the monoclinic centrosymmetric space group P2₁/n with following dimensions of the unit cell determined at a temperature of measurement of ?80±3°C: a=1041.2(4);b=1706.9(12);c=1001.1(6)pm; β=106.41(4)°; Z = 4. An X-ray structure determination (R_w = 0.039) confirms the constitution of the compound as already derived from its nmr spectra. One trimethylsilyl group is bound to the phosphorus atom, whereas the other is connected with the sp²-hybridized nitrogen atom. Characteristic rounded bond lenghts and angles are: P? Si 231, P? CH₃ 184, P? C(S) 187, C?S 167, N? C(S) 137, and N? Si 181 pm as well as P? C? S 122°, P? C? N 117°, and S? C? N 121°.     

Nanogel nanosecond photonic crystal optical switching

We developed a robust nanosecond photonic crystal switching material by using poly(N-isopropylacrylamide) (PNIPAM) nanogel colloidal particles that self-assemble into crystalline colloidal arrays (CCAs). The CCA was polymerized into a loose-knit hydrogel which permits the individual embedded nanogel PNIPAM particles to coherently and synchronously undergo their thermally induced volume phase transitions. A laser T-jump from 30 to 35 degrees C actuates the nanogel particle shrinkage; the resulting increased diffraction decreases light transmission within 900 ns. Additional transmission decreases occur with characteristic times of 19 and 130 ns. Individual NIPAM sphere volume switching occurs in the approximately 100 ns time regime. These nanogel nanosecond phenomena may be useful in the design of fast photonic crystal switches and optical limiting materials. Smaller nanogels will show even faster volume phase transitions.     

Beitrag zur Analyse von Stibin

Zusammenfassung Es wird ein Verfahren zur Bestimmung von Stibin beschrieben, das sich sowohl zur Analyse von SbH₃ in organischen Lösungsmitteln als auch zur Bestimmung von flüssigem oder festem SbH₃ eignet. Hierbei wird das Stibin mit überschüssigem Brom zu Sb^V oxydiert, danach mit SO₂ zu Sb^III reduziert und dieses oxydimetrisch mit Jod oder Bromat titriert.

---

Summary A method is proposed for the determination of stibine, applicable to its solutions in organic solvents and also to the solvent-free liquid or solid substance. The procedure involves oxidation of SbH₃ with an excess of bromine to Sb^V, reduction to Sb^III with SO₂, and oxidimetric titration of the trivalent antimony with iodine or bromate.

---

---

Herrn Professor Dr. C. Mahr zum 65. Geburtstag gewidmet.     

Determination of the turnover number of the restriction endonuclease EcoRI using evanescent wave technology

Binding and catalytic activity of the type II restriction endonuclease EcoRI on immobilized DNA has been observed in real time using three different evanescent wave biosensors and two different immobilization techniques. The method gives direct access to the turnover number (kcat) without the necessity for the determination of any concentration or activity. The combination of different evanescent wave techniques gives access to the catalytic mechanism and allows the determination of the rate limiting step.