Oxygen-sensing film coated photodetectors for portable instrumentation

A sensor configuration for oxygen determination based on luminescence quenching is presented in which the measured parameter is closely related to the luminescence lifetime. The sensing film is based on the dye platinum octaethylporphyrin complex immobilised in a polystyrene membrane and stabilised with the heterocyclic amine DABCO. In this report, we study the feasibility of using photodiodes as elements to be coated by this oxygen sensing film with the aim of obtaining a sensing device whose small size makes it possible to embed it into a portable measurement system. In addition to the concomitant sensor miniaturisation, several advantages have been demonstrated such as fast response, low energy consumption, the lack of any need for optical filter elements and less tendency to photobleaching than with previous configurations. A complete study of the coated photodetector preparation was carried out in order to optimise the specifications of the portable instrument where the photodetector is included, such as: repeatability, transient response and selectivity. We propose a preparation procedure for coating photodetectors with this film that has demonstrated the capacity to produce repetitive and reliable sensing devices.     

The effect of aqueous solvation upon alpha-helix formation for polyalanines

The incremental free energies of aqueous solution for acetyl(ala)NNH2 in its extended unfolded and alpha-helical conformations are compared using the SM5.2 solvation method of Cramer and Truhlar. A combination of density functional theory (DFT) at the B3LYP/D95(d,p) and AM1 has been employed using the ONIOM method. The incremental solvation energies of alpha-helical structures are very similar for both ONIOM and AM1 optimized structures as these structures do not significantly change upon solution. However, the conformations of the unfolded peptides change from extended beta-strand to polyproline II conformations upon aqueous solution. The incremental solvation free energy per residue of the polyproline II structure is about 2 kcal/mol/residue greater than that for the alpha-helix, representing an upper limit for the difference between the solvation energies. However, most of this difference disappears when the energy required to distort the optimized gas-phase extended beta-strand structure to the optimized polyproline II solution structure is included in the analysis, leaving an estimated difference in incremental solvation free energy of 0.3-0.5 kcal/mol favoring the unfolded structure. The solution structure sacrifices the stability derived from the intramolecular C5 H-bonds for more favorable interactions with the aqueous solvent.     

Kinetic migration studies using Porapak as solid-food simulant to assess the safety of paper and board as food-packaging materials

Porapak has been studied as a solid-food simulant in experiments on paper and board packaging. Three samples of paper with different recycled pulp content and surface treatment, and of different grammage and thickness, were used for the studies. Kinetic behaviour from 25 °C to 100 °C and different contact times ranging from 5 min at 100 °C to 10 days at 25 °C were studied using Porapak or, occasionally, Tenax or milk powder. Similar results were obtained with Porapak and Tenax but those from Porapak were more stable with temperature. Porapak behaves as good solid-food simulant even at high temperature.     

Cooperative double deprotonation of bis(2-picolyl)amine leading to unexpected bimetallic mixed valence (M(-I), M(I)) rhodium and iridium complexes

Cooperative reductive double deprotonation of the complex [Rh(I)(bpa)(cod)](+) ([4](+), bpa = PyCH(2)NHCH(2)Py) with one molar equivalent of base produces the bimetallic species [(cod)Rh(bpa-2H)Rh(cod)] (7), which displays a large Rh(-I),Rh(I) contribution to its electronic structure. The doubly deprotonated ligand in 7 hosts the two "Rh(cod)" fragments in two distinct compartments: a "square planar compartment" consisting of one of the Py donors and the central nitrogen donor and a "tetrahedral π-imine compartment" consisting of the other pyridine and an "imine C═N" donor. The formation of an "imine donor" in this process is the result of substantial electron transfer from the {bpa-2H}(2-) ligand to one of the rhodium centers to form the neutral imine ligand bpi (bpi = PyCH(2)N═CHPy). Hence, deprotonation of [Rh(I)(bpa)(cod)](+) represents a reductive process, effectively leading to a reduction of the metal oxidation state from Rh(I) to Rh(-I). The dinuclear iridium counterpart, complex 8, can also be prepared, but it is unstable in the presence of 1 mol equiv of the free bpa ligand, leading to quantitative formation of the neutral amido mononuclear compound [Ir(I)(bpa-H)(cod)] (2). All attempts to prepare the rhodium analog of 2 failed and led to the spontaneous formation of 7. The thermodynamic differences are readily explained by a lower stability of the M(-I) oxidation state for iridium as compared to rhodium. The observed reductive double deprotonation leads to the formation of unusual structures and unexpected reactivity, which underlines the general importance of "redox noninnocent ligands" and their substantial effect on the electronic structure of transition metals.     

Ferrocene-indole hybrids for cancer and malaria therapy

We report the synthesis, characterization, and cytotoxic and antimalarial activity of ferrocene-indole hybrids 8-14. The 2-phenylindole scaffold was chosen because of its potent antimitotic activity and ferrocene was chosen following the development of ferrocifens, ferrocene derivatives of tamoxifen, which are prototypes of a new family of organometallic anti-estrogens. Ferrocene-indole hybrids 8-14 and their corresponding organic analogues 1-7 showed only moderate antimalarial activities, while ferrocene-indole hybrids 11 and 12 showed excellent in vitro activities against the A549 human carcinoma cell line, with IC₅₀ values of 5 and 7 μM respectively. These ferrocene-indole hybrids were up to 25-fold more potent as cytotoxic agents than their purely organic analogues.     

Epoxidation of olefins with a silica-supported peracid in supercritical carbon dioxide under flow conditions

Anhydrous 2-percarboxyethyl-functionalized silica (2b), a recyclable supported peracid, is a suitable reagent to perform the epoxidation of alkenes 1 in supercritical carbon dioxide at 250 bar and 40 °C under flow conditions. This procedure simplifies the isolation of the reaction products and uses only carbon dioxide as a solvent under mild conditions. The solid reagent 2b can be easily recycled by a reaction with 30% hydrogen peroxide in an acid medium.     

A model structure approach to the finitistic dimension conjectures

We explore the interlacing between model category structures attained to classes of modules of finite $\mathcal {X}$‐dimension, for certain classes of modules $\mathcal {X}$. As an application we give a model structure approach to the finitistic dimension conjectures and present a new conceptual framework in which these conjectures can be studied.     

Silicene: compelling experimental evidence for graphenelike two-dimensional silicon

Because of its unique physical properties, graphene, a 2D honeycomb arrangement of carbon atoms, has attracted tremendous attention. Silicene, the graphene equivalent for silicon, could follow this trend, opening new perspectives for applications, especially due to its compatibility with Si-based electronics. Silicene has been theoretically predicted as a buckled honeycomb arrangement of Si atoms and having an electronic dispersion resembling that of relativistic Dirac fermions. Here we provide compelling evidence, from both structural and electronic properties, for the synthesis of epitaxial silicene sheets on a silver (111) substrate, through the combination of scanning tunneling microscopy and angular-resolved photoemission spectroscopy in conjunction with calculations based on density functional theory.     

Disposable Amperometric Immunosensor for the Determination of the E‐Cadherin Tumor Suppressor Protein in Cancer Cells and Human Tissues

This paper describes the results obtained in the development of the first electrochemical immunosensor described to date for the detection of E‐cadherin (E‐cad) protein, a relevant biomarker of prognosis and metastasis in cancer, based on the use of magnetic microcarriers (MBs) and amperometric transduction at screen‐printed carbon electrodes (SPCEs). Thus, the determination of E‐cad protein involved the use of two specific antibodies against this protein (one of them labelled with HRP) in a sandwich configuration onto HOOC‐MBs. The magnetic bioconjugates were captured onto SPCEs and the amperometric transduction was performed using the H₂O₂/hydroquinone (HQ) system. Under optimal conditions, this bioplatform demonstrated a wide linear concentration range (0.50–25 ng mL^?1) and a detection limit as low as 0.16 ng mL^?1, well below the optimal cut‐off level for the E‐cad protein (defined as 10,000 ng mL^?1 for soluble E‐cad levels in serum). The developed sensor also showed a good reproducibility among measurements with seven different sensors constructed in the same manner (RSD, 5.4 %), stability for more than 15 days and good specificity towards other proteins commonly found on biological samples. The applicability of this simple handling bioplatform for the direct determination of this protein in cell lysates with different metastatic potential and extracts from paraffined‐embedded human colorectal cancer tissues of different grade were also demonstrated.