(2,7-Disubstituted-1,8-biphenylenedioxy)bis(dimethylaluminum) as bidentate organoaluminum Lewis acids: elucidation and synthetic Utility of the double electrophilic activation phenomenon

A series of (2,7-disubstituted-1,8-biphenylenedioxy)bis(dimethylaluminum) (2) has been readily prepared in situ by treatment of the requisite 2,7-disubstituted-1,8-biphenylenediol (1) with Me3Al (2 equiv) in CH2Cl2 at room temperature; this primarily relies on the successful establishment of a new synthetic procedure of 1 starting from inexpensive m-anisidine. Evaluation of 2 as a bidentate organoaluminum Lewis acid has been performed by the reduction of ketonic substrates using Bu3SnH as a hydride source in comparison to the conventional monodentate Lewis acid dimethylaluminum 2,6-xylenoxide (11), uncovering the significantly high activation ability of 2 toward carbonyl. Particularly, (2,7-dimethyl-1,8-biphenylenedioxy)bis(dimethylaluminum) (2a) exerted the highest reactivity, which has also been emphasized in the Mukaiyama aldol reaction. The structure of the bidentate Lewis acid 2 was unambiguously determined by single-crystal X-ray diffraction analysis of 2g possessing a bulky 3,5-di-tert-butylphenyl substituent, revealing the rigid dimeric assembly in the solid state. The double electrophilic activation of carbonyl substrate by 2a has been supported by low-temperature 13C NMR analysis as well as theoretical study using the Gaussian 98 program. Moreover, unique stereoselectivity has been observed in the 2a-promoted Mukaiyama Michael addition, and highly chemoselective functionalization of carbonyl compounds in the presence of their acetal counterparts has been realized using 2a. Finally, the effectiveness of 2a for the activation of ether functionality has been demonstrated in the Claisen rearrangement of allyl vinyl ethers.     

Wetting of surfactant solutions by alkanes.

Ellipsometry, surface tensiometry, and contact-angle measurement have been used to study the transition between partial wetting and pseudo-partial wetting of surfactant solutions by alkanes. In the partial wetting regime, the air-water surface tension is the same with and without alkane. In the pseudo-partial wetting regime, the air-water surface tension is lowered by the presence of alkane, showing that oil is solubilised into the surfactant monolayer. A discontinuous change in the coefficient of ellipticity with increasing surfactant concentration provides unequivocal evidence for the first-order nature of the wetting transitions. Ellipsometry has been used to explore the generality of wetting transitions of alkanes (dodecane, hexadecane, and squalane) on surfactant solutions [dodecyltrimethylammonium bromide, tetredecyltrimethylammonium bromide, dibucaine hydrochloride, and Aerosol OT (AOT)]. Of the systems studied, only hexadecane on AOT solutions did not show a wetting transition. Excess alkane remains as a lens on the surface of the surfactant solutions at all concentrations, but the contact angle is a minimum at the wetting transition. A semiquantitative model for the variation of the contact angle with surfactant concentration is provided.     

A new Zn(II) coordination polymer with 4-pyridylthioacetate: assemblies of homo-chiral helices with sulfide sites

A coordination polymer [Zn(pyta)(OH)] (pyta = 4-pyridylthioacetate), was synthesized and structurally characterized; it is constructed by an alternating assembly of two types of homo-chiral helices, [Zn-OH] and [Zn-pyta], in which the sulfide moieties are fastened in the latter columns.     

The extractive spectrophotometric determination of palladium(ii) as the mixed-ligand complex with picolinealdehyde-2-hydroxy-5-phenylanil and chloride ion

The extraction of palladium(II) with chloroform in the presence of PHPA and chloride ions is described. The extracted species has an absorption maximum at 627 nm, and Beer's law is obeyed over the range 10–200 μg of palladium. The molar absorptivity is 4.90·10³ l mol^?1 cm^?1 at 627 nm. The 1:1:1 Pd(PHPA)-Cl complex is extracted from aqueous solution. The effect of foreign ions on the determination of palladium(II) is examined.     

Interaction between dyes and polyelectrolytes. XIII. Effect of dye aggregation on the excitation energy transfer between bound dyes

Effect of polyanions on the aggregation of methylene blue (MB) was investigated spectrophotometrically. The following polyanions were used: potassium poly(vinyl sulfate), potassium poly(styrenesulfonate), sodium poly(methacrylate), and sodium poly(acrylate). The state of aggregation was largely dependent on the kind of polyanion and polyanion-MB ratio. MB-photo-sensitized isomerization of cis-p-(phenylazo)phenyltrimethylammonium iodide(cis-PTA) to the transisomer was used advantageously to investigate the effect of dye aggregation on the triplet excitation energy transfer between cationic dyes bound to polyanions. Although the efficiency of the excitation energy transfer between MB and cis-PTA was enhanced by the addition of polyanions, the formation of highly aggregated MB reduced the efficiency of the excitation energy transfer. Correlation with the dye aggregation induced by polyanions and the efficiency of excitation energy transfer between dyes was discussed.     

Syntheses and reactions of functional polymers. XLII. Preparation and use of polymers having N-hydroxy-succinimide unit in the chain

Styrene-maleic anhydride alternating copolymer was converted to N-hydroxymaleimide-styrene copolymer by reaction with hydroxylamine in pyridine at room temperature. The conversion was more than 90%. From this copolymer, N-acetoxy- or N-benzoyloxymaleimide-styrene copolymers were derived by action of acetic anhydride or benzoyl chloride in dimethylformamide at room temperature. Acylation of several primary amines was carried out effectively by use of these N-acyloxyimide-styrene copolymers. The reaction of the acetylated copolymer with diethylamine at room temperature afforded N-hydroxyimide copolymer.     

Spectrophotometric determination of cobalt(II) with 2-(3′-sulfobenzoyl)pyridine benzoylhydrazone

A simple method has been described for the Spectrophotometric determination of cobalt(II) with 2-(3′-sulfobenzoyl)pyridine benzoylhydrazone (SBPBH). In aqueous solution, cobalt(II) reacts with SBPBH to form a yellow complex, which is not destroyed even by the addition of 3.8 M perchloric acid. The absorption maximum of the complex in 1.5 M perchloric acid medium was found to be 400 nm; the molar absorptivity was 2.17 × 10⁴ liters mol⁻¹ cm⁻¹. The proposed method is fairly selective and has been applied to the determination of cobalt in standard alloy steel samples.     

Room-temperature and solution-state observation of the mixed-valence cation radical dimer of tetrathiafulvalene, [(TTF)2]+*, within a self-assembled cage

A mixed-valence state of the cation radical tetrathiafulvalene dimer, [(TTF)2]+*, is generated by the electrochemical oxidation of a stacked TTF dimer accommodated within an organic-pillared coordination cage. This mixed-valence species is remarkably stable (t1/2 = approximately 1 day at room temperature in aqueous solution under air) and clearly characterized by cyclic voltammogram and electronic absorption spectroscopy.     

Effect of various halide salts on the incompatibility of cyanocobalamin and ascorbic acid in aqueous solution

Combination of cyanocobalamin (VB12) and ascorbic acid (VC) has been widely seen in pharmaceutical products and dietary supplements. However, VB12 has been reported that its behavior in stability in aqueous solution is quite different when VC is mixed. In the present study, we examined the stabilities of these vitamins in acetate buffer (pH 4.8) using high performance liquid chromatography. Degradation of VB12 was not observed in the absence of VC in the buffer. However, when VC was mixed in the VB12 solution, VB12 concentrations decreased in accordance with VC degradation. VB12 and VC degradations were inhibited by adding sodium halides to acetate buffer at pH 4.8. These stabilization effects were also observed in the range from pH 3.5 to 5.3 and by adding potassium, magnesium, and calcium halides. Furthermore, our data demonstrated that increases in the halide anion concentrations and atomic number (Cl-相似文献   

Heterogeneous strong base catalysis in supercritical carbon dioxide by mesoporous alumina and sulfated mesoporous alumina

The development of solid strong base catalysts utilizable in green but acidic medium of scCO₂ is reviewed. The strong base sites on mesoporous alumina and sulfated mesoporous alumina that had been generated by severe treatment at 773 K under vacuum (10^?4 Torr) were not neutralized by the compressed Lewis acidic molecules of CO₂, promoting a representative strong base-catalyzed reaction of the Tishchenko reaction as well as a typical base-catalyzed reaction of the Knoevenagel reaction in scCO₂. Infrared spectroscopy of the adsorbed pyrrole, temperature-programmed desorption of CO₂, and the poisoning by a very weak Brönsted acid of methanol have revealed that the average strengths of the base sites on mesoporous alumina and sulfated mesoporous alumina are weaker than that on conventional γ-alumina like JRC-ALO-4, but that they have a small number of strong base sites which function even in scCO₂ medium. It was found that the addition of a slight amount of THF cosolvent into scCO₂ remarkably accelerates the Tishchenko reaction over sulfated mesoporous alumina; the reaction rate in the scCO₂–THF medium was 1.5-fold and 2-fold faster than those in ordinary organic solvents such as benzene and THF and that in pure scCO₂, respectively. The unique structures of mesoporous alumina and sulfated mesoporous alumina have been fully characterized by N₂ adsorption–desorption measurements and XRD analyses.