Polyether azomethines. I. Synthesis and characterization

Six new polyether azomethines were synthesized by melt and solution polycondensation of six different diamines with 4,4′-[1,4-phenylene bis(oxy)] bisbenzaldehyde. The polymers synthesized by solution method are yellow to white in color and had inherent viscosities up to 0.59 dL/g in concentrated H₂SO₄. The polymers obtained by melt condensation show higher viscosity. Except polymer IV , others are insoluble in common organic solvents. The polymers were characterized by IR, x-ray, elemental analysis, and DSC study. The thermal stability of the polymers was evaluated by TGA and IGA study. Polymers I-III are highly thermally and thermooxidatively stable and exhibit no appreciable decomposition up to 420°C both in air and nitrogen atmosphere. It was shown that the curing of the polyazo-methines takes place by opening up of the ? CH?N? linkages at higher temperature. The electrical conductivities of the virgin and iodine doped polymers were as high as 10^?11?10^?16 and 10^?6?10^?8S cm^?1, respectively, at 30°C. Electronic spectra of the undoped polymers ( I-III ) indicated a large bathochromic shift of the ? – ?^* absorptions band (376 nm) due to ? C?N? bonds of the model compound. This can be attributed to extensive delocalization of the electrons along the polymer chain. © 1995 John Wiley & Sons, Inc.     

Palladium catalyzed atom-efficient cross-coupling reactions of triarylbismuths with aryl bromides

Aryl bromides (3 equiv) were coupled efficiently with triarylbismuths (1 equiv) in an atom-efficient way using the Pd(OAc)₂/PPh₃ catalytic system in the presence of K₃PO₄ as base in DMF at 90 °C, providing excellent yields of the cross-coupled biaryls in short reaction times.     

Ag implantation-induced modification of Ni–Ti shape memory alloy thin films

Nanocrystalline thin films of Ni–Ti shape memory alloy are deposited on an Si substrate by the DC-magnetron co-sputtering technique and 120?keV Ag ions are implanted at different fluences. The thickness and composition of the pristine films are determined by Rutherford Backscattering Spectrometry (RBS). X-Ray diffraction (XRD), atomic force microscopy (AFM) and four-point probe resistivity methods have been used to study the structural, morphological and electrical transport properties. XRD analysis has revealed the existence of martensitic and austenite phases in the pristine film and also evidenced the structural changes in Ag-implanted Ni–Ti films at different fluences. AFM studies have revealed that surface roughness and grain size of Ni–Ti films have decreased with an increase in ion fluence. The modifications in the mechanical behaviour of implanted Ni–Ti films w.r.t pristine film is determined by using a Nano-indentation tester at room temperature. Higher hardness and the ratio of higher hardness (H) to elastic modulus (E_r) are observed for the film implanted at an optimized fluence of 9?×?10¹⁵ ions/cm². This improvement in mechanical behaviour could be understood in terms of grain refinement and dislocation induced by the Ag ion implantation in the Ni–Ti thin films.     

Nanoparticle Size‐Fractionation through Self‐Standing Porous Covalent Organic Framework Films

Covalent organic frameworks (COFs) have attracted attention due to their ordered pores leading to important industrial applications like storage and separation. Combined with their modular synthesis and pore engineering, COFs could become ideal candidates for nanoseparations. However, the fabrication of these microcrystalline powders as continuous, crack‐free, robust films remains a challenge. Herein, we report a simple, slow annealing strategy to construct centimeter‐scale COF films ( Tp‐Azo and Tp‐TTA ) with micrometer thickness. The as‐synthesized films are porous (SA_BET=2033 m² g^?1 for Tp‐Azo ) and chemically stable. These COFs have distinct size cut‐offs (ca. 2.7 and ca. 1.6 nm for Tp‐Azo and Tp‐TTA , respectively), which allow the size‐selective separation of gold nanoparticles. Unlike, other conventional membranes, the durable structure of the COF films allow for excellent recyclability (up to 4 consecutive cycles) and easy recovery of the gold nanoparticles from the solution.     

Three new pseudohalide bridged dinuclear Zn(II) Schiff base complexes: Synthesis,crystal structures and fluorescence studies

Three new dinuclear Zn(II) complexes [Zn(L)(μ_1,1-N₃)Zn(L)(N₃)] · 1.5H₂O (1), [Zn(L)(μ_1,1-NCO)Zn(L)(NCO)] · 1.5H₂O (2) and [Zn(L)(μ_1,1-NCS)Zn(L)(NCS)(OH₂)] (3) have been synthesized from a potentially tetradentate N₂O₂-donor Schiff base ligand LH, [LH = (OCH₃)(OH)C₆H₃CHN(CH₂)₂N(CH₃)₂], which is the condensation product of o-vanillin and 2-dimethylaminoethylamine. All the three complexes 1, 2 and 3 have been characterized by elemental analysis, IR and ¹H NMR spectroscopy, TGA and fluorescence studies. Finally, their structures have been established by the single crystal X-ray diffraction method. Structural studies reveal that in complexes 1, 2 and 3 the two Zn(II) centers are held together by a μ₂-phenolato oxygen atom and also by an end-on pseudohalide nitrogen (azide for 1; cyanate for 2; thiocyanate for 3) atom. Among the two deprotonated Schiff base ligands present in each complex, one acts as a tetradentate ligand (N₂O₂ donor set) while the other acts as a tridentate ligand (N₂O donor set), having a non-coordinated methoxy group. All the synthesized complexes display intraligand ¹(π–π^∗) fluorescence and can potentially serve as photoactive materials.     

Conformally flat charged dust

It is proved that the most general conformally flat singularity-free solution for charged dust in static equilibrium must be spherically symmetric and the solution is unique. It matches with exterior Reissner-Nordström metric. The manifest form of the metric conformal to Minkowskian metric is also given.On study leave from Jadavpur University, Calcutta-700032, India.     

Biomimetic growth of gallic acid–ZnO hybrid assemblies and their applications

In this study, we probed the biomimetic formation of gallic acid (GA)–ZnO nanoparticle hybrids. It was found that the morphologies formed were dependent upon pH values, resulting in GA–ZnO hybrids of varying shapes such as micro or nanoplates or fibers. The formed supramolecular GA–ZnO hybrids were found to be luminescent as indicated by confocal microscopy and were utilized for the photocatalytic degradation of the organic dye methylene blue. We also explored the bactericidal effects of the hybrids on Staphylococcus aureus (S. aureus) as well as Escherichia Coli (E. Coli). Thus, we have developed a new class of shape-controlled nanohybrid assemblies via mild, green synthetic methods that may be utilized for photocatalytic degradation for environmental remediation as well as for antibacterial applications.     

Crystallization and structural relaxation in quasicrystalline Al6CuMg4

We report here electron microscopic, differential scanning calorimetric (DSC) and X-ray diffraction studies on the phase transition in Al₆CuMg₄ alloy. Structural analysis of the transformed crystalline phase suggests that some of the lattice sites, which define the vertices of triacontahedron - the basic volume element of three dimensional Penrose tiling for this system - are fractionally occupied. We also observed that the specific heat of the as grown quasicrystalline alloy reduces gradually from 1.08J/gm. K at 330K to the Dulong Petit value 0.84J/gm. K around 420K, due to structural relaxation of the quasicrystalline phase.