Orientations of ZnO grown on GaN

On semipolar epitaxial ZnO grown by chemical vapor deposition consists of two distinct orientations as evidenced by transmission electron microscopy and X‐ray diffraction. The initially grown ZnO on GaN follows the GaN lattice with the epitaxial relationship of // and The other oriented ZnO domains then grow on faceted with and with good coherency with the ‐oriented grains. (© 2015 WILEY‐VCH Verlag GmbH &Co. KGaA, Weinheim)     

Growth of well-aligned Bi nanowire on Ag(1 1 1)

We report the fabrication of one-dimensional (1D) Bi nanowires grown on Ag(1 1 1) with average lateral width from 9 to 20 nm by physical vapor deposition in ultra high vacuum conditions. In situ low-temperature scanning tunneling microscopy analyses reveal that the preferred growth of 1D Bi nanostructures is driven by the highly anisotropic bonding in the crystallographic structure of the Bi(1 1 0) plane. The Bi nanowires grow along direction and align with the directions on Ag(1 1 1). The growth of the Bi nanowires proceeds in a bilayer growth mode resulting from the layer pairing in Bi(1 1 0) which saturates the dangling bonds and lowers the total energy.     

Small‐angle scattering of polychromatic X‐rays: effects of bandwidth,spectral shape and high harmonics

Polychromatic X‐ray sources can be useful for photon‐starved small‐angle X‐ray scattering given their high spectral fluxes. Their bandwidths, however, are 10–100 times larger than those using monochromators. To explore the feasibility, ideal scattering curves of homogeneous spherical particles for polychromatic X‐rays are calculated and analyzed using the Guinier approach, maximum entropy and regularization methods. Monodisperse and polydisperse systems are explored. The influence of bandwidth and asymmetric spectra shape are explored via Gaussian and half‐Gaussian spectra. Synchrotron undulator spectra represented by two undulator sources of the Advanced Photon Source are examined as an example, as regards the influence of asymmetric harmonic shape, fundamental harmonic bandwidth and high harmonics. The effects of bandwidth, spectral shape and high harmonics on particle size determination are evaluated quantitatively.     

Formation of bamboo-shaped carbon nanotubes on carbon black in a fluidized bed

For the first time, bamboo-shaped multiwalled carbon nanotubes, having diameter of the order of 50 nm, have been grown on carbon black in a fluidized bed in bulk amount. The activation energy for the synthesis of the product was found out to be around 33 kJ/mol in the temperature range of 700−900 °C. The carbon nanotubes were separated from the carbon black by preferential oxidation of the later, the temperature of which was determined by thermogravimetry. The transmission electron microscopy revealed different features of the nanotubes such as “Y” junction, bend, and catalyst filling inside the nanotubes. Small angle neutron scattering was performed on the nanotubes synthesized at different temperatures. The data were fitted into a suitable model in order to find out the average diameter, which decreases with increase in synthesis temperature. The Monte Carlo simulation predicts the same behavior. Based on the above observations, a possible growth mechanism has been predicted. The oscillation in carbon saturation value inside the catalyst in the fluidized bed has been indicated as the responsible factor for the bamboo-shaped structure.     

An estimation of S/N degradation at millimeter waves during rain events

The use of Ka Band (20/30 GHz) for future satellite communications has been addressed. The exploitation of Ka band with a bandwidth of 2500 MHz seems to represent the largest significant achievement in satellite communications potential, so far. The problems associated with the use of this frequency band such as attenuation and receiver noise temperature (floor) variation with rain has been addressed. The receiver noise floor variation with rain has so far been ignored. Therefore, in view of propagation and noise study over this Ka Band, both signal attenuation and receiver noise floor variations with rain rate are estimated using dual frequency radiometers operating at 22.235 and 31.4 GHz over a tropical station, Calcutta, India.     

Study of gain flatness for multi-channel amplification in single stage EDFA for WDM applications

In this paper, gain flatness is studied for simultaneous 16-ITU-T channel amplifications at C-band (1,532–1,558 nm) in a single stage EDFA for WDM application at different average inversion levels. The inversion levels are varied due to the change of the input signal levels from the targeted operating point and also for dropping few numbers of channels. Specially designed gain flattening filter (GFF) is used in order to get the flat gain with gain variation ±0.5 dB for −20 dBm/ch input signal power (total input signal power is −8.0 dBm) at a fixed average inversion level which is maintained by proper selection of optimum fibre length and pump power. A specific loss spectrum of GFF is obtained by writing a chirped fibre Bragg grating of length 20 mm. Gain variations are studied by changing the total input signal levels from −8.0 dBm to −20.0 dBm and maintained within 20.0 ± 0.5 dB by using automatic gain control (AGC) circuit. About 15 out of 16 channels are dropped and observed ± 0.5 dB gain-variation which is an important parameter in optical network system.     

光纤Mach-Zehnder干涉仪系统

介绍了光纤Mach-Zehnder(MZ)干涉仪系统的结构.给出了光纤Mach-Zehnder干涉仪系统中信号光与参考光的干涉原理以及影响干涉光强的因素.同时也分析了光纤耦合器的交叉耦合,另外也给出了PZT的作用.阐述了光纤偏振控制器的结构、工作原理及其对光纤Mach-Zehnder干涉仪系统传感臂偏振态的控制,最后给出了光纤Mach-Zehnder干涉仪系统的应用.     

Dispersion measurements using time-of-flight remote detection MRI

Remote detection nuclear magnetic resonance and magnetic resonance imaging can be used to study fluid flow and dispersion in a porous medium from a purely Eulerian point of view (i.e., in a laboratory frame of reference). Information about fluid displacement is obtained on a macroscopic scale in a long-time regime, while local velocity distributions are averaged out. It is shown how these experiments can be described using the common flow propagator formalism and how experimental data can be analyzed to obtain effective porosity, flow velocity inside the porous medium, fluid dispersion and flow tracing of fluid.     

Structural, magnetotransport and morphological studies of Sb-doped La2/3Ba1/3MnO3 ceramic perovskites

We report here the structural, magnetotransport and morphological studies of Sb-doped La_2/3Ba_1/3Mn_1−xSb_xO₃ perovskite manganites. Pristine material La_2/3Ba_1/3MnO₃ (LBMO) shows two insulator-metal (I-M) transitions in the electrical resistivity-temperature (ρ-T) behavior. While the higher temperature transition (T_P1) at ∼340 K is reminiscent of the usual I-M transition in manganites, the lower temperature transition (T_P2) at ∼250 K has been ascribed to the grain boundary (GB) effects arising out of the ionic size mismatch between the ions present at the rare-earth site (La³⁺ and Ba²⁺). With Sb-doping T_P1 shifts to lower temperatures while T_P2 remains invariant up to 3% and shifts to lower temperature for 5%. Room temperature electrical resistivity and the peak values also increase successively with Sb-doping. Scanning electron micrographs of the samples exhibit a gradual increase in their grain sizes with Sb indicating a gradual decrease in the GB density. Shift of T_P1 with doping is explained on the basis of a competition between double-exchange and super-exchange mechanisms. The overall electrical resistivity increases and the shift in the electrical resistivity hump (T_P2) with Sb-doping is found related to be gradually decreasing GB density and the ensuing lattice strain increase at the GBs. The intrinsic magnetoresistance (MR) gets suppressed and extrinsic MR gets enhanced with Sb-doping. At T>T_P1, the electrical resistivity is found to follow the adiabatic polaron hopping model whereas the electron-magnon scattering is found to dominate in the metallic regime (T<T_P1).     

Cosmic ray test for a T0 detector

The endcap of time-of-flight (ETOF) detector in BES (Beijing Spectrometer) III is planned to be upgraded by using multi-gap resistive plate chambers (MRPCs) and the designed time resolution of the MRPCs is around 50 ps. Thus a time-zero (T0) detector needs to be built to offer a high quality reference time for the MRPCs beam test. So a T0 detector is built using plastic scintillator tiles (BC420) to couple with four fast phototubes (PMTs, Hamamatsu H6533). The timing properties of the detector is studied by using a cosmic ray test and factors related to the time resolution, such as plastic scintillator size, readout mode and angle effects, are discussed. T0 detector timing resolutions of ～41-62 ps are achieved, which means that the T0 detector can be used in the MRPC beam test.