Development of biobased polyurethane‐imides from maleinized cottonseed oil and castor oil

An eco‐friendly coating system, which is largely biobased, has been developed from castor and cottonseed oil. Cottonseed oil was functionalized with maleic anhydride by “ene” reaction to give maleinized cottonseed oil (MACSO); the anhydride groups were reacted with isocyanates to yield –NCO terminated polyurethane prepolymer. The prepolymer was further chain extended with hydroxyl groups of castor oil to give polyurethane‐imides (PUIs). The cross‐linked films thus obtained had good mechanical properties, and the imide groups in the backbone improved the corrosion resistance of PUIs as revealed by potentiodynamic polarization study. With increasing content of MACSO, thermal stability, glass transition temperatures (T_g), tensile strength, and corrosion resistance of resulting PUIs significantly increased.     

Characterization of serpentine: a potential nuclear shielding material

The use of serpentine as a potential nuclear shielding material necessitates a chemical quality control of the samples before its use in reactors. With this in view, characterization of these mineral samples was carried out using inductively coupled plasma atomic emission spectrometry (ICP-AES) and Instrumental neutron activation analysis (INAA) methods. The analytical results obtained by both ICP-AES and NAA techniques were found to be comparable. Na, Cr, Co, Zn, and Cu were found to be present in all samples of Indian origin while Ga, Ag, Ni, and Cd were found to below the limits of detection. A comparison on the detection limits of elements of interest was also carried out by both the analytical techniques and found to be in good agreement. An infrared spectroscopic investigation was also carried out on all the mineral samples. Bands at 3,689 and 3,648 cm⁻¹ were attributed to inner and outer hydroxyl stretching of Mg–OH, respectively. The weak and broad band centered around 3,416 cm⁻¹ was assigned due to the stretching vibrations of the adsorbed water molecules while three bands at 1076, 1022 and 968 cm⁻¹ were prescribed to the vibrations of the SiO₄ tetrahedra.     

Silica-supported sodium carbonate: an efficient heterogeneous catalyst for the synthesis of new thiazolopyrimidine derivatives

Research on Chemical Intermediates - Herein we describe a new convenient strategy for the synthesis of substituted thiazolopyrimidines. The present approach delivers the use of silica-supported...     

Spectrophotometric determination of some antiamoebic and anthelmintic drugs with metol and chromium(VI)

A sensitive spectrophotometric method is reported for the determination of tinidazole (TZ), metronidazole (MZ), benzoyl metronidazole (BMZ) or niclosamide (NS) either in pure form or in formulations. This method is based on reduction with zinc dust and hydrochloric acid followed by reaction with metol and potassium dichromate at pH 3.0 +/- 0.2 to give a coloured product having maximum absorbance at 720 nm (for TZ, MZ and BMZ) or 530 nm (for NS).     

Microwave Assisted Synthesis of Some Novel Thiopyrano[2,3-b]quinolines as a New Class of Antimicrobial Agent

A series of novel substituted thiopyrano[2,3-b]quinolines 4a–e , 5a–e , and 6a–e were prepared from substituted 3-formyl-2-mercapto quinolines 2a–e , on reaction with ethyl acetoacetate, diethyl malonate, and ethyl cyanoacetate 3a–c by microwave irradiation in the presence of piperidine. Synthesized compounds were evaluated for antimicrobial activities. Among the compounds tested, 7-chloro-2-oxo-2H-thiopyrano[2,3-b]quinoline-3-carbonitrile 6d and 7-nitro-2-oxo-2H-thiopyrano[2,3-b]quinoline-3-carbonitrile 6e were highly active against S. aureus and M. roseus.     

Synthesis and characterization of processable polyamides containing polar quinoxaline unit in the main chain and evaluation of its hydrophilicity

Here we report a new five polyamides prepared via solution-phase polycondensation under Yamazaki-Higashi conditions to prove the suitability of this method. The synthesized polyamides were characterized by FTIR, ¹H-NMR, differential scanning calorimetry, thermogravimetric analysis, inherent viscosity, solubility and wettability tests. These polyamides were amorphous in nature and they are completely soluble in many organic solvents and they could easily be solution-cast into transparent, flexible films. The as-prepaired polymers showed excellent thermal properties. The glass transition temperatures of these polymers are in the range of 251–274?°C under nitrogen atmosphere. The decomposition temperature in nitrogen for a 10% weight-loss temperature is more than 744?°C, and char yield at 900?°C ranged from 43 to 56% in nitrogen. Water contact angles were also tested to know the hydrophilicity of the polyamide films. As-synthesized polyamides showed smallest quantact angles indicating hydrophilic surface.     

Design,synthesis and characterization of peptidyl boronate analogues as effective antimicrobial agents

Research on Chemical Intermediates - Antibiotic-resistant penicillin binding protein (PBPs) production is one of the reasons why bacteria develop resistance to β-lactam antibiotics, and this...     

Synthesis,docking and ADME prediction of novel 1,2,3-triazole-tethered coumarin derivatives as potential neuroprotective agents

Research on Chemical Intermediates - In an attempt to find potential neuroprotective agents, a series of novel 3-(1-((1-(substituted phenyl)-1H-1,2,3-triazol-4-yl) methoxyimino)...     

Estimation in the continuous time mover‐stayer model with an application to bond ratings migration

The usual tool for modelling bond ratings migration is a discrete, time‐homogeneous Markov chain. Such model assumes that all bonds are homogeneous with respect to their movement behaviour among rating categories and that the movement behaviour does not change over time. However, among recognized sources of heterogeneity in ratings migration is age of a bond (time elapsed since issuance). It has been observed that young bonds have a lower propensity to change ratings, and thus to default, than more seasoned bonds. The aim of this paper is to introduce a continuous, time‐non‐homogeneous model for bond ratings migration, which also incorporates a simple form of population heterogeneity. The specific form of heterogeneity postulated by the proposed model appears to be suitable for modelling the effect of age of a bond on its propensity to change ratings. This model, called a mover–stayer model, is an extension of a Markov chain. This paper derives the maximum likelihood estimators for the parameters of a continuous time mover–stayer model based on a sample of independent continuously monitored histories of the process, and develops the likelihood ratio statistic for discriminating between the Markov chain and the mover–stayer model. The methods are illustrated using a sample of rating histories of young corporate issuers. For these issuers the default probabilities predicted by the Markov chain and mover–stayer models are different. In particular for 1–4 years old bonds the mover–stayer model estimates substantially lower default probabilities from rating C than a Markov chain. Copyright © 2004 John Wiley & Sons, Ltd.