Palladium(II)-selenoether complexes as new single source precursors: first synthesis of Pd4Se and Pd7Se4 nanoparticles

Pd(4)Se and Pd(7)Se(4) nanoparticles (size 38-104 nm), protected by TOP, have been obtained for the first time using Pd(II) ligated with selenated primary and secondary amines (see 1 and 2) as single source precursors respectively. TEM, SEM, powder XRD and photoluminescence have been used to characterize them. 1 and 2 are also the first Pd(II)-selenoether complexes used for the synthesis of nanoparticles containing palladium and selenium.     

Pd-catalyzed sequential C-C bond formation and cleavage: evidence for an unexpected generation of arylpalladium(II) species

A Pd(II)-catalyzed reaction engaging alkenyl β-keto esters is reported that leads to the formation of 1-naphthols and an unexpected generation of arylpalladium(II) species. Interception of the in situ generated arylpalladium(II) species in a Mizoroki-Heck reaction, together with additional mechanistic studies, provided strong evidence in support of the first aromatization-driven β-carbon elimination process. A single Pd catalyst served to promote a series of both C-C bond forming and cleavage events in an unprecedented manner.     

Identification and structural elucidation of two process impurities and stress degradants in darifenacin hydrobromide active pharmaceutical ingredient by LC-ESI/MS(n)

The present study describes the identification and characterization of two process impurities and major stress degradants in darifenacin hydrobromide using high performance liquid chromatography (HPLC) analysis. Forced degradation studies confirmed that the drug substance was stable under acidic, alkaline, aqueous hydrolysis, thermal and photolytic conditions and susceptible only to oxidative degradation. Impurities were identified using liquid chromatography coupled with ion trap mass spectrometry (LC-MS/MS(n)). Proposed structures were unambiguously confirmed by synthesis followed by characterization using nuclear magnetic resonance spectroscopy (NMR), infrared spectroscopy (IR) and elemental analysis (EA). Based on the spectroscopic, spectrometric and elemental analysis data, the unknown impurities were characterized as 2-{1-[2-(2,3-dihydrobenzofuran-5-yl)-2-oxo-ethyl]-pyrrolidin-3-yl}-2,2-diphenylacetamide (Imp-A), 2-[1-(2-benzofuran-5-yl-ethyl)-pyrrolidin-3-yl]-2,2-diphenylacetamide (Imp-B), 2-{1-[2-(2,3-dihydrobenzofuran-5-yl)-ethyl]-1-oxy-pyrrolidin-3-yl}-2,2-diphenylacetamide (Imp-C) and 2-{1-[2-(7-bromo-2,3-dihydrobenzofuran-5-yl)-ethyl]-pyrrolidin-3-yl}-2,2-diphenylacetamide (Imp-D). Plausible mechanisms for the formation and control of these impurities have also been proposed. The method was validated as per regulatory guidelines to demonstrate specificity, sensitivity, linearity, precision, accuracy and the stability-indicating nature. Regression analysis showed a correlation coefficient value greater than 0.99 for darifenacin hydrobromide and its impurities. The accuracy of the method was established based on the recovery obtained between 86.6 and 106.7% for all impurities.     

Techno-commercial aspects of food irradiation in India

Research and development work has been carried out at Food Technology Division of Bhabha Atomic Research Center for more than past fifty years. After establishing potential commercial applications, a lot of time and efforts were spent on proving the wholesomeness and nutritional adequacy of irradiated foods. The first approval from health authorities came in 1994 for processing potato, onion and spices. Additional commodities were approved in 1998 and 2001, bringing the list of commodities to more than 20. Two technology demonstration plants were set up by the government, one for high dose applications like microbial decontamination of spices and dry vegetables in 2000, and another for low dose applications, like sprout inhibition and insect disinfestation, in 2003. In 2004, irradiation was approved as a quarantine measure. This enabled export of mango to USA after a gap of 18 years in 2007. More than a dozen plants have now been set up by private entrepreneurs in the country.     

Surface ion engineering of Mn2+-doped ZnS quantum dots using ion-exchange resins

We report the engineering of surface ions present as defects in doped quantum dots (Qdots) following their synthesis. This was achieved by treating the Qdots with cation-exchange resin beads (CB). An aqueous dispersion of Mn(2+)-doped ZnS Qdots, when treated with different amounts of CB, resulted in two kinds of changes in the emission due to Mn(2+) ions. First, the intensity increased in the presence of a smaller amount of CB, to the extent of a doubled quantum yield. With increased CB as well as incubation time, the emission intensity decreased systematically, accompanied by an increasing blue shift of the peak emission wavelength. Electron spin resonance results indicated the removal of clusters of Mn(2+) present in the Qdots by the CB, which has been attributed to changes in the emission characteristics. Transmission electron microscopy studies revealed that for smaller amounts of CB there was no change in the particle size, whereas for greater amounts the particle size decreased. The results have been explained on the basis of the removal of Mn(2+) (and also Zn(2+)) ions present on the surfaces of Qdots in the form of clusters as well as individual ions.     

A Tandem Olefin Migration and Prins Cyclization Using Cu(OTf)(2)-Bisphosphine Complexes: An Improved Synthesis of Functionalized Tetrahydropyrans

In situ-generated (bis-DPPMB)-Cu(OTf)₂ complex has been examined to catalyze a tandem olefin migration and Prins cyclization of an alkenol with various aldehydes. The reaction proceeded with electron-rich aromatic aldehydes at room temperature and provided functionalized tetrahydropyrans in good yields. An efficient synthesis of the bis-DPPMB ligand has also been described.     

Efficient synthesis of methyl carbamate via Hofmann rearrangement in the presence of TsNBr2

An efficient method has been developed for the synthesis of carbamates from the corresponding amides via the Hofmann rearrangement using N,N-dibromo-p-toluenesulfonamide (TsNBr₂) in the presence of DBU in methanol. The reaction goes into completion in 10–20 min at 65 °C to produce the corresponding carbamate in excellent yield.     

Solid supported palladium(0) nano/microparticle: a ligand-free efficient recyclable heterogeneous catalyst for mono- and β,β-double-Heck reaction

Solid supported palladium nano/microparticles were found to be active catalysts to perform mono- and β,β-double-Heck reactions. Different β-unsubstituted and substituted alkenes including acrylate, methacrylate, crotonate, styrene, acrylonitrile, and acrylamide were investigated successfully for mono- and β,β-double-Heck reactions with aryl iodide under milder reaction condition. One-pot β,β-double-Heck reaction of aryl iodides with α,β-unsaturated ester, amide, nitrile, and styrene derivatives were also performed under standard reaction conditions. Wide functional group tolerance, easy catalyst recovery, and recyclability up to twelve times without significant loss of catalytic activity added extra importance to the present process.     

Synthesis of optically active seven-membered 1,5-anhydrocarbasugars and 1,4,5-tribenzoyloxy-2-ethoxy cycloheptanes via [5+2] cycloaddition

[5+2] Cycloaddition followed by asymmetric dihydroxylation procedure have been utilized to prepare novel cyclitols. Accordingly, rac-2α-hydroxy-6α-ethoxy-1,5-anhydro cyclohept-3-ene, 10 derived from [5+2] cycloaddition of 3-oxidopyrylium ylide and vinyl ether has been recognized as a seven-membered carbasugar equivalent and elaborated to 1,4,5-tribenzoyloxy-2-ethoxy cycloheptanes through a flexible, regio- and stereoselective strategy involving Sharpless asymmetric dihydroxylation conditions to resolve the compounds obtained. The structures and relative configurations of newly synthesized (+)-2α-acetoxy-6α-ethoxy-3β,4β-dihydroxy-1,5-anhydro cycloheptane ((+)-12)); (−)-1β,4β,5β-tribenzoyloxy-6α-ethoxy cycloheptane ((−)-17) and (+)-1α,4α,5α-tribenzoyloxy-6β-ethoxy cycloheptane ((+)-17) are unambiguously established by single crystal X-ray analysis and duly supported by ¹H and ¹³C NMR spectroscopy data.     

Simultaneous optimization of multiple quality characteristics in laser cutting of titanium alloy sheet

Titanium and its alloys have high demand in different industries due to their superior properties. The conventional cutting methods face difficulties for cutting these alloys due to their poor thermal conductivity, low elastic modulus and high chemical affinity at elevated temperatures. Laser cutting may be used for quality cuts by proper control of different process parameters. The aim of present research is to simultaneously optimize kerf taper and surface roughness in the laser cutting of Titanium alloy sheet (grade 5). The developed regression models for kerf taper and surface roughness have been taken as objective functions for the genetic algorithm based multi-objective optimization. The paper presents optimal solutions and improvements in different quality characteristics thereof. The significant control factors have been found with further discussion of their effect on two important quality characteristics kerf taper and surface roughness.