An equilibrium study on the distribution of structural defects between the lamellar and amorphous portions of poly(vinylidene fluoride) and (vinylidene fluoride‐tetra fluoro ethylene) copolymer crystals

Samples of poly(vinylidene fluoride) (PVF₂) and (vinylidene fluoride‐tetra fluoroethylene) (VF₂‐VF₄) copolymer were etched with a chromium‐based etching reagent. The etching rate was lower for the VF₂‐VF₄ copolymer samples than for the PVF₂ samples. The melting point and enthalpy of fusion increased with increased etching time of the etched specimen. This was also true for the melt‐quenched (etched) samples, whose values were always lower than those obtained from the direct run of the etched samples. The scanning electron micrographs of specimens etched for 24 h indicated that only the amorphous portion was etched without affecting the crystalline lamella. The sequence distribution of the PVF₂ and VF₂‐VF₄ copolymer crystals were determined by ¹⁹F NMR measurements of the samples and their etched species. The observed probabilities (P_obs), calculated from the integrated area of the NMR peaks, indicated that the crystalline lamella had a more oriented chain structure than that of the amorphous overlayer portion. The head‐to‐head defects calculated from the aforementioned sequence analysis indicated a greater propensity in the amorphous portion than in the crystalline lamella. The equilibrium constant (K) for the distribution of defects between the lamella and amorphous portion of the crystal varied from 0.7 to 0.9. It was higher at a higher quenching rate of the crystallization, and in the isothermal crystallization, it also had a substantially high value, indicating the equilibrium inclusion of defects in the crystal. The distribution constant increased with an increase in the defect content in the chain and decreased with an increase in the defect size. The sequence distribution data, analyzed through a suitable melting‐point depression equation, indicated a defect energy of 2.25 kcal/mol for the α‐phase PVF₂ crystals and 0.68 kcal/mol for the β‐phase VF₂‐VF₄ copolymer. © 2000 John Wiley & Sons, Inc. J Polym Sci B: Polym Phys 38: 297–308, 2000     

A model for hyperparasitism in malaria with environmental fluctuations

The present paper deals with the problem of enhancement of host fitness in malaria, due to the effect of hyperparasitism. The experimental evidence for such situations is reviewed. A mathematical model for host-parasite-parasitoid (tritrophic) is considered to analyze the experimental observations. The effect of environmental fluctuation in the tritrophic system is also observed and optimum values of the inaccessible parameters involved in the system are estimated for purposes of biological control.     

Wavelet-modified binary phase-only morphological correlation for color pattern recognition

This paper reports a morphological phase-only correlation technique based on bit-map representation for recognition of color as well as grey images in a hybrid digital-optical correlation architecture. The color image is decomposed into its R, G and B components, and each component is further decomposed into eight disjoint elementary images depending upon the bit-map representation of the color value at each pixel. Bit-map representation of the pixel values of an image reduces the required computational time. A set of twenty-four disjoint wavelet-modified binary phase-only filters (WBPOFs) are generated from these bit-map decomposed images. The target image is similarly decomposed into eight disjoint images each of R, G and B and their digital Fourier transforms multiplied with the corresponding WBPOFs. The product functions thus obtained are added up to form a single resultant product function, whose optical Fourier transformation gives the correlation peaks for the presence of R, G and B components in the image. The single product function overcomes the necessity of obtaining the final optical Fourier transformation of the R, G and B components separately. The novelty of this approach lies in the fact that the WBPOFs synthesized by this procedure are thus able to identify both colored as well as gray images and can tolerate salt-and-pepper noise to a considerable extent.     

SULPHONATED POLY ETHER ETHER KETONE/ POLYVINYL ALCOHOL/PHOSPHOTUNGSTIC ACID COMPOSITE MEMBRANES FOR PEM FUEL CELLS

Composite membranes with polyvinyl alcohol (PVA),sulphonated poly ether ether ketone (SPEEK) and phosphotungstic acid (PWA) were prepared using solvent casting method.The proton conductivities of such membranes were found to be in the order of 10~(-3) S/cm in the fully hydrated condition at room temperature as measured by impedance spectroscopy.The crystalline properties were studied by X-ray diffraction analysis.The thermal properties were determined by TGA and DSC techniques.The tensile strength and pe...     

Stereoselective synthesis of the C(1)-C(12) segment of iriomoteolide 1a: a very potent macrolide antitumor agent

A stereoselective synthesis of the C(1)-C(12) segment of the potent cytotoxic macrolide, iriomoteolide 1a, has been accomplished. The key steps involve an enzymatic kinetic resolution of a β-hydroxy amide, a Pd-catalyzed cross-coupling to a substituted allylsilane, a highly regio- and stereoselective conjugate addition of lithium dimethylcopper to an α, β-acetylenic esters and an elaboration of the C(6)-C(7) trans-olefin geometry by a Julia-Kocienski olefination.     

Bright,NIR‐Emitting Au23 from Au25: Characterization and Applications Including Biolabeling

A novel interfacial route has been developed for the synthesis of a bright‐red‐emitting new subnanocluster, Au₂₃, by the core etching of a widely explored and more stable cluster, Au₂₅SG₁₈ (in which SG is glutathione thiolate). A slight modification of this procedure results in the formation of two other known subnanoclusters, Au₂₂ and Au₃₃. Whereas Au₂₂ and Au₂₃ are water soluble and brightly fluorescent with quantum yields of 2.5 and 1.3 %, respectively, Au₃₃ is organic soluble and less fluorescent, with a quantum yield of 0.1 %. Au₂₃ exhibits quenching of fluorescence selectively in the presence of Cu²⁺ ions and it can therefore be used as a metal‐ion sensor. Aqueous‐ to organic‐phase transfer of Au₂₃ has been carried out with fluorescence enhancement. Solvent dependency on the fluorescence of Au₂₃ before and after phase transfer has been studied extensively and the quantum yield of the cluster varies with the solvent used. The temperature response of Au₂₃ emission has been demonstrated. The inherent fluorescence of Au₂₃ was used for imaging human hepatoma cells by employing the avidin–biotin interaction.     

Adsorption behavior of rhodamine B on Rhizopus oryzae biomass

The removal of a carcinogenic dye rhodamine B (C. I. 45170) from wastewater by biomass of different moulds and yeasts is described. Among all of the fungal species tested, the biomass of Rhizopus oryzae MTCC 262 is found to be the most effective. Dye adsorption reaches maximum with the biomass harvested from the early stationary phase of growth. The optimum temperature and pH for adsorption are observed to be 40 degrees C and 7.0, respectively. The adsorption rate is very fast initially and attains equilibrium after 5 h. The adsorption isotherm follows the Langmuir isotherm model satisfactorily within the studied dye concentration range. Of the different metabolic inhibitors tested, 2,4-ditrophenol (DNP) and N,N'-dicyclohexylcarbodiimide (DCCD) decrease dye adsorption by approximately 30% suggesting the role of energy metabolism in the process. Spectrophotometric study indicates that the removal of rhodamine B by R. oryzae biomass involves an adsorption process. Scanning (SEM) and transmission (TEM) electron microscopic investigations have been carried out to understand the probable mechanism of the dye-biomass interaction.     

Chemomechanics of surface stresses induced by DNA hybridization

When biomolecular reactions occur on one surface of a microcantilever beam, changes in intermolecular forces create surface stresses that bend the cantilever. While this phenomenon has been exploited to create label-free biosensors and biomolecular actuators, the mechanisms through which chemical free energy is transduced to mechanical work in such hybrid systems are not fully understood. To gain insight into these mechanisms, we use DNA hybridization as a model reaction system. We first show that the surface grafting density of single-stranded probe DNA (sspDNA) on a surface is strongly correlated to its radius of gyration in solution, which in turn depends on its persistence length and the DNA chain length. Since the persistence length depends on ionic strength, the grafting density of sspDNA can be controlled by changing a solution's ionic strength. The surface stresses produced by the reaction of complementary single-stranded target DNA (sstDNA) to sspDNA depend on the length of DNA, the grafting density, and the hybridization efficiency. We, however, observe a remarkable trend: regardless of the length and grafting density of sspDNA, the surface stress follows an exponential scaling relation with the density of hybridized sspDNA.     

Finding minimum energy configurations for constrained beam buckling problems using the Viterbi algorithm

In this work, we present a novel technique to find approximate minimum energy configurations for thin elastic bodies using an instance of dynamic programming called the Viterbi algorithm. This method can be used to find approximate solutions for large deformation constrained buckling problems as well as problems where the strain energy function is non-convex. The approach does not require any gradient computations and could be considered a direct search method. The key idea is to consider a discretized version of the set of all possible configurations and use a computationally efficient search technique to find the minimum energy configuration. We illustrate the application of this method to a laterally constrained beam buckling problem where the presence of unilateral constraints together with the non-convexity of the energy function poses challenges for conventional schemes. The method can also be used as a means for generating “very good” starting points for other conventional gradient search algorithms. These uses, along with comparisons with a direct application of a gradient search and simulated annealing, are demonstrated in this work.