Silver nanoparticles embedded phosphomolybdate–polyaniline hybrid electrode for electrocatalytic reduction of H<Subscript>2</Subscript>O<Subscript>2</Subscript>

Hybrid silver/phosphophomolybdate/polyaniline (Ag/PMo12/PAni) was obtained through one pot synthesis, and then, it was successfully fabricated on the glassy carbon electrode by simple casting method for electrocatalytic reduction of hydrogen peroxide (H₂O₂). The cyclic voltammetric studies of the Ag/PMo12/PAni hybrid electrode suggest that the electronic properties of the phosphomolybdate are retained even after the formation of hybrid material and in addition effectively electro-catalyzing the reduction of H₂O₂ with a less negative over potential. The Ag/PMo12/PAni-modified electrode showed the lowest detection limit (750 nM) for H₂O₂ reduction among the hybrid-modified electrodes already reported with a sensitivity of 4.398 nA μM⁻¹. The prepared hybrid material was well characterized by using UV, XRD and TEM analysis.     

Hydrophosphination of boron–boron multiple bonds

Five compounds containing boron–boron multiple bonds are shown to undergo hydrophosphination reactions with diphenylphosphine in the absence of a catalyst. With diborenes, the products obtained are highly dependent on the substitution pattern at the boron atoms, with both 1,1- and 1,2-hydrophosphinations observed. With a symmetrical diboryne, 1,2-hydrophosphination yields a hydro(phosphino)diborene. The different mechanistic pathways for the hydrophosphination of diborenes are rationalised with the aid of density functional theory calculations.

Compounds containing boron–boron double and triple bonds are shown to undergo uncatalysed hydrophosphination reactions with diphenylphosphine.     

Enantioselective Alkylation of N‐Arylhydrazones Derived from α‐Keto Esters and Isatin Derivatives through Asymmetric Phase‐Transfer Catalysis

The phase‐transfer‐catalyzed asymmetric alkylation reactions of N‐arylhydrazones derived from α‐keto‐esters and isatin derivatives afford enantioenriched azo compounds that bear a tetra‐substituted carbon stereocenter in good yields with high chemo‐ and enantioselectivity. The alkylation products can be readily converted into chiral amino esters, hydrazine derivatives, and aza‐β‐lactams without loss of enantiopurity.     

Orientation of pyrylium guests in cucurbituril hosts

According to recent reports, supramolecular complexes of the pyrylium cation with cucurbit[x]urils (CB[x], x = 7, 8) show promising photoluminescence suitable for electroluminescent devices. In turn, photoluminescence seems to be related to the stereochemistry of the complexes; however, that has been controversial. Here, we report that in H(2)O, 2,6-disubsituted-4-phenyl pyryliums (Pylm) form dimers quantitatively (equilibrium constants >10(4) M(-1)), but they enter as such only in the larger CB[8]. In terms of orientation, (1)H NMR shows that Me-Pylm, Ph-Pylm, and t-Bu-Pylm insert their 4-phenyl groups in either the CB[7] or CB[8] cavity. The orientation of iPr-Pylm in the iPr-Pylm@CB[7] complex is similar. Experimental conclusions are supported by DFT calculations using the M062X functional and the 6-31G(d) basis set. In the case of (iPr-Pylm)(2)@CB[8], (1)H NMR of both the guest and the host indicates that both guests might enter CB[8] from the same side with their iPr groups in the cavity, but DFT calculations leave room for ambiguity. In addition to the size and hydrophobicity of the 2,6-substituents of the guests, as well as the size and flexibility of the hosts, theory reveals the importance of explicit solvation (H(2)O) and finite temperature effects (particularly for (1)H NMR shielding calculations) in the determination of the stereochemistry of those complexes.     

Pressure Transients in Gas Phase Adsorptive Reactors

The role of pressure and flow transients caused by strong adsorption on the behavior of gas phase adsorptive reactors was studied using a staged model. The general gas phase reaction A + B C is considered for two cases: (1) the product C is adsorbed and (2) both reactants A and B are adsorbed. Strong adsorption of one or more components causes a decrease in the pressure(s) in the stage(s). The pressure decrease causes variations in the inlet and outlet flow rates and in the case of multiple stages, it causes variations in the flows between tanks. In accordance with Le Chatelier's principle, the pressure decrease aids or inhibits product formation depending on whether there is an increase or decrease in total moles by reaction. Reactant flow into the section where adsorption occurs increases because of increased pressure drop behind the adsorption front. However, the residence time of the reactants behind the adsorption front is lower because of the higher velocity. The flow variations can aid or hinder product formation depending on the specific conditions. Thus, the adsorption-caused pressure variations directly modify reaction rates and product concentrations and, also indirectly, by causing flow variations which affect reaction rates and product concentrations. This study highlights the need to include pressure variations when modeling gas phase adsorptive reactors if adsorption is strong irrespective of the net change in the total moles by reaction. It also demonstrates a method to incorporate axial pressure drop in staged models.     

Carbon nanotubes reinforced with natural/synthetic polymers to mimic the extracellular matrices of bone – a review

The persistent failure of conventional materials used in manufacturing orthopedic implants was due to the deficiency or poor integrations of implant materials to the juxtaposed bone and stress-strain imbalances between the interfaces of tissues and implant materials. Therefore, the fabrication of a suitable bioactive scaffold for bone tissue engineering is considered a vital requisite to mimic the extracellular bone matrix. Numerous researches were reported concerning the fabrication of a suitable bioactive scaffold to improve cell adhesion, proliferation, and differentiation so far. However, for the past two decades, the research on carbon nanotubes (CNTs)-reinforced composites employed in the biomedical field is increasing day-by-day because of its outstanding properties. Moreover, it is essential to choose a biocompatible polymer with greater affinity to act as an extracellular matrix as well as to attract CNTs and in facilitating the homogeneous distribution of CNTs in aqueous and organic solvents. The development of CNTs-based composites in bone tissue engineering is presented in this review based on the last 10 years of research. The detailed information about the structural-functions and defects of bone, and the importance of CNTs-functionalized natural and synthetic polymers, and their potential activity in bone regenerations and bone replacements have been reviewed.     

Chemical diversity and anti-proliferative activity of marine algae

The chemical diversity of three macroalgae (Ulva reticulata, Sargassum wightii, Gracilaria sp) were determined using the GC-MS method with principal component analysis (PCA) and their potential efficacy against human pathogens and cervical carcinoma cells evaluated using MTT bioassay method. Our results showed that >30 metabolites were detected in three seaweeds, among these, steroids and fatty acids are the most dominant chemical group that highly contributes to discriminate this species. The PCA of GC-MS mass spectral variables showed a clear discrimination between three different species based on the phytochemical diversity of seaweeds. The extracts of U. reticulata exhibited anti-microbial activity with Pseudomonas aeruginosa (6.00?mm) and showed potential anti-proliferative activity against the HeLa cells (IC₅₀ 37?µmol/L) at concentration 1–50?µM treatment. Results of this study concluded that PCA analysis of mass spectral variables could be utilized as a reliable tool for species discrimination and chemotaxonomic classification of seaweeds.     

Inclusion of temperature dependent shell corrections in Landau theory for hot rotating nuclei

Landau theory used for studying hot rotating nuclei usually uses zero temperature Strutinsky smoothed total energy for the temperature dependent shell corrections. This is replaced in this work by the temperature dependent Strutinsky smoothed free energy. Our results show that this replacement has only marginal effect for temperatures greater than 1 MeV but plays significant role at lower temperatures.     

Binuclear Ru(III) Schiff base complexes: synthesis,spectral characterization,oxidation, C?C coupling reactions and antibacterial activities

New hexa‐coordinated binuclear Ru(III) Schiff base complexes of the type {[(B)₂X₂Ru]₂L} (where B = PPh₃ or AsPh₃; X = Cl or Br; L = binucleating N₂O₂ Schiff bases) were synthesized and characterized by elemental analysis, magnetic susceptibility measurement, FT‐IR, UV–vis, ¹³C{¹H}‐NMR, ESR at 300 and 77 K, cyclic voltammetric technique, powder X‐ray diffraction pattern and SEM. The new complexes were used as catalysts in phenyl–phenyl coupling reaction and the oxidation of alcohols to their corresponding carbonyl compounds using molecular oxygen atmosphere at room temperature. Further, the new Schiff base ligands and their Ru(III) complexes were also screened for their antibacterial activity against K. pneumoniae, Shigella sp., M. luteus, E. coli and S. typhi. From this study, it was found that the activity of the ruthenium(III) Schiff base complexes almost reaches the effectiveness of the conventional bacteriocide standards. Copyright © 2009 John Wiley & Sons, Ltd.     

Investigation of the Optical Properties of a Novel Class of Quinoline Derivatives and Their Random Laser Properties Using ZnO Nanoparticles

Quinoline Schiff bases display potential applications in optoelectronics and laser fields because of their unique optical properties that arise from extensive delocalization of the electron cloud, and a high order of non-linearity. In this context, a new class of conjugated quinoline-derivative viz. N-(quinolin-3-ylmethylene)anilines were synthesized from 2-hydroxyquinoline-3-carbaldehyde in two good yielding steps. The ability of these imines to accept an electron from a donor is denoted by their electron acceptor number and sites, which is calculated using density functional theory (DFT). The optical properties such as FT-IR, Raman, UV-VIS, and EDS spectra were calculated using TD-DFT, which also provided the energy gap, HOMO-LUMO structure. The optical properties of the synthesized imino quinolines were experimentally studied using photoluminescence and absorption spectroscopy. The properties such as Stokes shift and quantum yield were calculated using experimental data. Furthermore, the compound bearing a methyl group on the aryl ring and ZnO nanoparticles (hydrothermally synthesized) were dissolved in toluene, and optically excited with a 355 nm nanosecond laser, which produced a random laser.