Enhanced thermal conductivity of epoxy–matrix composites with hybrid fillers

The results of thermal conductivity study of epoxy–matrix composites filled with different type of powders are reported. Boron nitride and aluminum nitride micro‐powders with different size distribution and surface modification were used. A representative set of samples has been prepared with different contents of the fillers. The microstructure was investigated by SEM observations. Thermal conductivity measurements have been performed at room temperature and for selected samples it was also measured as a function of temperature from 300 K down to liquid helium temperatures. The most spectacular enhancement of the thermal conductivity was obtained for composites filled with hybrid fillers of boron nitride–silica and aluminum nitride–silica. In the case of sample with 31 vol.% of boron nitride–silica hybrid filler it amounts to 114% and for the sample with 45 vol.% of hybrid filler by 65% as compared with the reference composite with silica filler. However, in the case of small aluminum nitride grains application, large interfacial areas were introduced, promoting creation of thermal resistance barriers and causing phonon scattering more effective. As a result, no thermal conductivity improvement was obtained. Different characters of temperature dependencies are observed for hybrid filler composites which allowed identifying the component filler of the dominant contribution to the thermal conductivity in each case. The data show a good agreement with predictions of Agari‐Uno model, indicating the importance of conductive paths forming effect already at low filler contents. Copyright © 2014 John Wiley & Sons, Ltd.     

A Simple Method of the Determination of the Structural Heterogeneity of Microporous Solids

A new procedure for determining the structural heterogeneity of microporous solids is presented. Applying the concept of a general adsorption isotherm equation, a method for solving this equation for adsorption in micropores is developed, and the applicability of a new simple algorithm for determining the parameters of microporous structure of two commercial carbons is shown. Copyright 2001 Academic Press.     

Formamide dimers: a computational and matrix isolation study

The dimerization of formamide (FMA) has been investigated by matrix isolation spectroscopy, static ab initio calculations, and ab initio molecular dynamics (AIMD) simulations. Comparison of the experimental matrix IR spectra with the ab initio calculations reveals that two types of dimers A and C are predominantly formed, with two and one strong NH...O hydrogen bonds, respectively. This is in accordance with previously published experiments. In addition, there is also experimental evidence for the formation of the thermally labile dimer B after deposition of high concentrations of FMA in solid xenon. The AIMD simulations of the aggregation process show that in all cases dimer C is initially formed, but rearrangement to the more stable doubly hydrogen-bonded structures A or B occurs for a fraction of collisions on the sub-picosecond time scale.     

Combined sorption/transport of sodium dodecyl sulfate and hydrochloric acid in a blend of cellulose acetate butyrate with cellulose acetate hydrogen phthalate

The transport of hydrochloric acid (0.001-0.1 M) and sodium dodecyl sulfate (0.001-0.1 M) has been measured through a membrane consisting of a blend of cellulose acetate butyrate and cellulose acetate hydrogen phthalate. The cellulose derivative blend is suggested to suffer an alteration in the degree of hydrophobicity when in equilibrium with sodium dodecyl sulfate (SDS) through hemimicelle formation. An increase in surface hydrophobicity of the blend when in equilibrium with SDS solution was observed by fluorescence measurements using the vibronic bands of the probe pyrene, as well as by water desorption kinetics; a decrease of the effective diffusion coefficients from 1.2 × 10⁻¹¹ m² s⁻¹ in the absence of SDS to approximately 2 × 10⁻¹³ m² s⁻¹ in its presence was found. The value obtained for the mutual diffusion coefficient of HCl in the concentration range 0.001-0.1 M (D=4.2×10⁻¹⁴ m² s⁻¹) shows also that the membrane presents hydrophobic features. The flux of SDS in the blend membrane at different pH values shows two distinct permeation rates depending on the cmc. However, from the calculation of permeability coefficients at SDS concentrations below the cmc a clear decrease in P is found, whilst, at concentrations above the cmc the permeability coefficients are nearly constant, only showing a slightly increase. The diffusion coefficients of SDS in the blend increase over the whole SDS concentration range analysed and show an effective diffusion coefficient 2-3 orders of magnitude below the diffusion coefficients of SDS in aqueous solutions. This fact suggests that the only diffusing species are SDS unimers. The presence of HCl in the SDS bulk solution has the effect of increasing the permeability and diffusion coefficients. Mutual analysis of permeation and diffusion coefficients and sorption isotherms shows that, on decreasing the pH, the interactions between SDS and the polymer network decrease. This is also reflected in a clear decrease of the hydrophobic interactions between the diffusing and polymeric species, provoked by a decrease in the unimer-unimer association.     

Synthesis of [60]fullerene-glycopyranosylaminopyrimidin-4-one conjugates

The synthesis of several C₆₀ derivatives containing a 6-(β-d-glycopyranosylamino)pyrimidin-4-one unit and a C₆₀-uridine conjugate is described. The fullerene derivatives bearing a 4-(β-d-glycopyranosylamino)pyrimidin-4-one moiety were synthesised by 1,3-dipolar cycloaddition reactions of C₆₀ with azomethine ylides generated in situ from the corresponding 5-formylpyrimidin-4-one derivatives and N-methylglycine. The synthesis of the C₆₀-uridine conjugate involved the selective protection of the 2′- and 3′-hydroxyl groups of uridine, esterification, cyclopropanation of C₆₀ and, finally, the deprotection of the hydroxyl groups. One of the fullerene-glycopyranosylaminopyrimidin-4-one conjugates was characterised by single-crystal X-ray crystallography. Differentiation between pairs of diastereoisomers, for several fullerene derivatives, was achieved through the study of their gas-phase fragmentations.     

The gap between crystalline and osmotic swelling of Na-montmorillonite: a Monte Carlo study

Although the swelling of clay during moistening is a broadly experienced occurrence, the mechanisms driving it and especially the reason for the existence of a peculiar gap between crystalline and osmotic swelling of Na-montmorillonite are not yet fully understood. We obtained a deeper insight by means of Monte Carlo simulations of Na-montmorillonite swelling, which yield the swelling curve, interaction energies between and characteristic positions of structural atoms and water molecules. We find that a chainlike structure consisting of Na cations, water molecules, and oxygens of substituted tetrahedrons of neighboring mineral layers is formed in the interlayer space of Na-montmorillonite at a layer spacing of approximately 19 A, where experimental investigations show termination of crystalline swelling. Such a persistent structure may lock the interlayer space, until excess water is able to break this chain by osmotic forces. We suggest that its formation is the reason for the existence of a gap in layer spacings between approximately 19 and approximately 40 A, which have been named "forbidden" layer spacings in experimental studies.     

Interaction between amphiphilic peptides and phospholipid membranes

This brief review aims at providing some illustrative examples on the interaction between amphiphilic peptides and phospholipid membranes, an area of significant current interest. Focusing on antimicrobial peptides, factors affecting peptide–membrane interactions are addressed, including effects of peptide length, charge, hydrophobicity, secondary structure, and topology. Effects of membrane composition are also illustrated, including effects of membrane charge, nature of the polar headgroup, and presence of cholesterol and other sterols. Throughout, novel insights on the importance of peptide adsorption density on membrane stability are emphasized, as is the correlation between peptide adsorption, peptide-induced leakage in model liposome systems, peptide-induced lysis of bacteria, and bacteria killing.     

Verbindungen des Germainums und Zinns. 17. Alkylarylstannylen-Komplexe des Chroms und Molybdäns ohne Donorstabilisierung

Compounds of Germanium and Tin. 17 [1]. Alkylarylstannylene Complexes of Chromium and Molybdenum without Donor Stabilization Reaction of the complexes [(OC)₅M(THF)], M = Cr, Mo, with the alkylarylstannylene RR′Sn: R = 2,4,6-tBu₃C₆H₂, R′ = CH₂C(CH₃)₂-3,5-tBu₂C₆H₂, provides the donor-free stannylene complexes [(OC)₅Cr?SnRR′] ( 6 ) and [(OC)₅Mo?SnRR′] ( 8 ), respectively. The X-ray structure analyses of the isotypic compounds 6 and 8 reveal the three coordinate tin atoms in strictly planar environments and acute CSnC angles of 91.2° ( 6 ) and 91.3° ( 8 ).     

1,3-dipolar cycloaddition reactions of porphyrins with azomethine ylides

[reaction: see text] The behavior of porphyrins as dipolarophiles in 1,3-dipolar cycloadditions with azomethine ylides was studied. Depending on the nature of the substituent groups on the porphyrin macrocycles, the reaction can give monoadducts (chlorins) or bisadducts (isobacteriochlorins and bacteriochlorins). When a large excess of azomethine ylide is used, trisadducts can also be obtained. Mixed isobacteriochlorin derivatives were prepared from the reaction of azomethine ylides with the chlorin monoadducts previously obtained via Diels-Alder reactions.     

Modeling of the hysteresis phenomena in finite-sized slitlike nanopores. Revision of the recent results by rigorous numerical analysis

The systematic investigation of the hysteresis phenomena in finite-sized slitlike nanopores via the Aranovich-Donohue (AD) lattice density functional theory (LDFT) is presented. The new reliable quantitative modeling of the adsorption and desorption branch of the hysteresis loop, through the formation and movement of the curved meniscus, is formulated. As a result, we find that our proposal, which closely mimics the experimental findings, can reproduce a rounded shape of the desorption branch of the hysteresis loop. On the basis of the exhausted commutations, we proved that the hysteresis loop obtained in the considered finite-sized slitlike geometry is of the H1 type of the IUPAC classification. This fundamental result and the other most important results do not confirm the results of the recent studies of Sangwichien et al., whereas they fully agree with the recent lattice studies due to Monson et al. We recognize that the nature of the hysteresis loops (i.e. position, width, shape, and the multiple steps) mainly depends on the value of the energy of both the adsorbate-adsorbate and adsorbate-adsorbent interactions; however, the first one is critical for the appearance of hysteresis. Thus, for relatively small adsorbate-adsorbate interactions, the adsorption-desorption process is fully reversible in the whole region of the bulk density. We show that the strong adsorbate-adsorbent interactions produce (also observed experimentally) multiple steps within hysteresis loops. Contrary to the other studies of the hysteresis phenomena in confined geometry via the LDFT formalism, we constructed both ascending and descending scanning curves, which are known from the experimental observations. Additionally, we consider the problem of the stability of both the obtained adsorption and desorption branches of the computed hysteresis loop in finite-sized slitlike nanopores.