Effect of homopolymer matrix on diblock copolymer grafted nanoparticle conformation and potential of mean force: A molecular simulation study

We study the effect of homopolymer A or B matrix on the conformations and effective interactions of AB diblock copolymer grafted particles using coarse‐grained molecular dynamics simulations. In an A homopolymer matrix we observe patchy conformations within the AB diblock copolymer grafted layer, where the number of B patches is controlled by the A‐A attractive interaction strength. In a B homopolymer matrix the grafted particle takes on a core‐corona conformation, where the inner A block aggregates near the particle surface and the outer B block forms a corona that interacts with the B matrix. The potential of mean force (PMF) between two particles in an A homopolymer matrix has a long‐ranged attractive well with a minima at intermediate distances corresponding to the location of the outer B block patches. The PMF between two particles in a B homopolymer matrix has an attractive well at short interparticle distances corresponding to the size of the inner A block. We isolate the contribution of the homopolymer matrix on the PMF between the two diblock copolymer grafted particles, by deducting the PMF in the absence of a matrix, assuming the contributions of the grafted particle and matrix to the PMF to be additive. © 2014 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2015 , 53, 76–88     

A fluorescent di-zinc(II) complex of bis-calix[4]arene conjugate as chemosensing-ensemble for the selective recognition of ATP

A triethylene glycol di-imine locked triazole linked bis-calix[4]arene conjugate L has been synthesised and characterised. Conjugate L exhibits high fluorescence enhancement towards Zn²⁺ among the 13 metal ions studied down to a lower detection limit of ～12 ppb. The absorption and visual colour change experiments differentiated the Zn²⁺ from the other metal ions studied. The isolated zinc complex, [Zn₂L] has been used as a chemo-sensing ensemble for the recognition of anions based on their binding affinities towards Zn²⁺. [Zn₂L] was found to be sensitive and selective towards phosphate-bearing species and in particular to adenosine triphosphate (ATP^2 ? ) among the other 20 anions studied as observed based on the changes occurred in the fluorescence intensity. The selectivity of the ATP^2 ?  has been shown on the basis of the changes observed in the emission and absorption spectral studies. The lowest detectable concentration for ATP^2 ?  with the chemo-sensing ensemble [Zn₂L] is 348 ppb in methanol. The fluorescence quenching by the phosphate-based anions has been modelled by molecular mechanics studies and found that the anions possessing two or more phosphate moieties can only bridge between the two zinc centres, and hence those possessing only one phosphate moiety (H₂PO₄^?  and AMP^2 ? ) are ineffective.     

Kinetics and mechanism of oxidation of N,α-diphenylnitrones by 4-(dimethylamino)pyridinium chlorochromate (DMAPCC) in aqueous DMF medium

The kinetics of oxidation of aldonitrones by 4-(dimethylamino)pyridinium chlorochromate (DMAPCC) has been studied in aqueous N,N-dimethylformamide in the presence of perchloric acid. The reaction follows first-order kinetics with respect to each of DMAPCC and nitrone. The order with respect to [H⁺] was found to be close to zero. The rate of oxidation was unaltered by the variation of [NaClO₄] but addition of MnSO₄ decreased the rate. The reaction rate was found to decrease with a decrease in dielectric constant of the medium. Electron-releasing and electron-withdrawing groups perturb the reaction rate with a good Hammett correlation. The oxidation products were found to be benzaldehyde and nitrosobenzene. The reaction was carried out at four different temperatures and the activation parameters have been calculated. On the basis of the experimental findings, a suitable mechanism has been proposed.     

Versatile multilayer thin film preparation using hydrophobic interactions, crystallization, and chemical modification of poly(vinyl alcohol)

Multilayer thin film coatings were prepared on silicon substrates. Poly(vinyl alcohol) was adsorbed from aqueous solution to propyldimethylsilyl-modified silicon wafers. This thin semicrystalline coating was chemically modified using acid chlorides to form thicker, hydrophobic coatings. The products of the modification reactions allowed adsorption of a subsequent layer of poly(vinyl alcohol) that could subsequently be hydrophobized. This two-step process (adsorption/chemical modification) allows layer-by-layer deposition to prepare coatings with thickness, chemical structure, and wettability control.     

Stabilized gold nanoparticles by reduction using 3,4-ethylenedioxythiophene-polystyrenesulfonate in aqueous solutions: nanocomposite formation, stability, and application in catalysis

Herein, we report a one-pot synthesis of highly stable Au nanoparticles (AuNPs) using 3,4-ethylenedioxythiophene (EDOT) as a reductant and polystyrene sulfonate (PSS-) as a dopant for PEDOT and particle stabilizer. The synthesis demonstrated in this work entails the reduction of HAuCl4 using EDOT in the presence of PSS-. The formation of AuNPs with concomitant EDOT oxidation is followed by UV-vis spectroscopy at various time intervals. Absorption at 525 nm is due to the surface plasmon band of AuNPs (violet), and broad absorption above 700 nm is due to oxidized PEDOT that was further characterized to be in its highly oxidized (doped) state, using FT-Raman spectroscopy. Transmission electron microscopy shows a polydisperse nature of the particles, and the selected area electron diffraction pattern reveals the polycrystalline nature of AuNPs. With stabilizers such as sodium dodecylsulfate (SDS) (green) and polyvinylpyrrolidone (PVP) (blue), the absorbance around 525 nm was found to be negligibly small, while PSS- showed high absorbance at 525 nm (violet) and above 700 nm (oxidized PEDOT). PSS- also allows complete oxidation of EDOT and serves as an effective dopant for PEDOT. While AuNPs covered by PEDOT alone cannot be dispersed in aqueous solutions, PSS- renders Au-PEDOT water soluble. The hydrodynamic diameter of the nanocomposite estimated from the dynamic light scattering (DLS) measurements increases in the order Na-PSS < SDS < PVP. Interestingly, the color of the Au(nano)-PEDOT/PSS- aqueous dispersion changed reversibly between violet and blue and vice versa on addition of NaOH and HCl, respectively. This reversible color change appears to be a combination effect of acid/base on the properties of PEDOT, in turn changing the environment around the embedded AuNPs. The nanoparticle dispersion also exhibited very high stability in presence of 3.0 M NaCl. Remarkably, the nanocomposite Au(nano)-PEDOT/PSS- was found to function as an effective catalyst to activate the reduction of 4-nitrophenol to 4-aminophenol in the presence of excess NaBH4, and the calculated apparent rate constant value of 4.39 x 10-2 s-1 is found to be higher than those obtained using other nanocomposites with SDS and PVP and comparable to the values reported in the case of other encapsulants.     

Functionalized polynorbornene dielectric polymers: Adhesion and mechanical properties

Within the microelectronics industry, there is an ongoing trend toward miniaturization coupled with higher performance. High glass-transition temperature polynorbornenes exhibit many of the key performance criteria necessary for these demanding applications. However, homopolynorbornene exhibits poor adhesion to common substrate materials, including silicon, silicon dioxide, aluminum, gold, and copper. In addition, this homopolymer is extremely brittle, yielding less than 1% elongation-to-break values. To address these issues, the homopolymer was functionalized to improve adhesive and mechanical properties. Attaching triethoxysilyl groups to the polymer backbone substantially improved the adhesion, but at the cost of increasing the dielectric constant because of the polarity of the functional group. Alkyl groups were also added to the backbone, which decreased the rigidity of the system, and resulted in significantly higher elongation-to-break values and a decrease in residual stress. The addition of an alkyl group slightly decreased the dielectric constant of the polymer as a result of an increase in molar volume. The coefficient of thermal expansion and modulus are also reported for the polynorbornene functionalized with triethoxysilyl groups using a multiple substrate approach. © 1999 John Wiley & Sons, Inc. J Polym Sci B: Polym Phys 37: 3003–3010, 1999     

Nondoped blue fluorescent OLED based on cyanophenanthrimidazole‐styryl‐triphenylamine/carbazole materials

New 2‐(4′‐9H‐carbazole‐9‐yl)‐styryl‐1H‐phenathro[9,10‐d]imidazole‐1‐yl)benzonitrile (SPICN‐Cz) and 4‐(2‐(4‐(diphenylamino)phenyl‐styryl‐1H‐phenathro[9,10‐d]imidazole‐1‐yl)benzonitrile (SPICN‐TPA) have been synthesised, and their photophysical, electrochemical, and electroluminescent properties were analysed in comparison with their cyano‐free parent compounds, SPI‐Cz, and SPI‐TPA. Solvatochromic effects show the transformation of an excited state character from locally excited (LE) state to charge transfer (CT) state. Using time‐dependent density functional theory calculation, the excited state properties of these donor‐acceptor blue emissive materials have been analysed. Their excited state properties have been tuned by replacing the strong donor triphenylamine to weak donor carbazole to achieve the combination of high photoluminance efficiency locally excited (LE) component and high exciton‐utilizing CT component in one excited state. Hybridization processes between LE and CT components of SPICN‐Cz and SPICN‐TPA in the emissive state have been discussed. The nondoped organic light emitting diode device based on SPICN‐Cz exhibit better electroluminescent performances than those of SPICN‐TPA–based device: high external quantum efficiency of 2.58 %, current efficiency of 2.90 cd A^‐1, and power efficiency of 2.26 lm W^‐1 with Commission Internationale de l'Éclairage (CIE) coordinates of (0.15, 0.12). The excited state modulation and the composition of LE and CT states in the donor‐acceptor system could be useful to design low‐cost, high‐efficiency fluorescent organic light emitting diode materials.     

Structure of poly(propyl ether imine) dendrimer from fully atomistic molecular dynamics simulation and by small angle x-ray scattering

We study the structure of carboxylic acid terminated neutral poly(propyl ether imine) (PETIM) dendrimer from generations 1-6 (G1-G6) in a good solvent (water) by fully atomistic molecular dynamics (MD) simulations. We determine as a function of generation the structural properties such as radius of gyration, shape tensor, asphericity, fractal dimension, monomer density distribution, and end-group distribution functions. The sizes obtained from the MD simulations have been validated by small angle x-ray scattering experiment on dendrimer of generations 2-4 (G2-G4). A good agreement between the experimental and theoretical value of radius of gyration has been observed. We find a linear increase in radius of gyration with the generation. In contrast, Rg scales as approximately Nx with the number of monomers. We find two distinct exponents depending on the generations, x=0.47 for G1-G3 and x=0.28 for G3-G6, which reveal their nonspace filling nature. In comparison with the amine terminated poly(amidoamine) (PAMAM) dendrimer, we find that Rg of Gth generation PETIM dendrimer is nearly equal to that of (G+1)th generation of PAMAM dendrimer as observed by Maiti et al. [Macromolecules 38, 979 (2005)]. We find substantial back folding of the outer subgenerations into the interior of the dendrimer. Due to their highly flexible nature of the repeating branch units, the shape of the PETIM dendrimer deviates significantly from the spherical shape and the molecules become more and more spherical as the generation increases. The interior of the dendrimer is quite open with internal cavities available for accommodating guest molecules, suggesting the use of PETIM dendrimer for guest-host applications. We also give a quantitative measure of the number of water molecules present inside the dendrimer.     

Acute and sub-acute toxicity study of hydroalcoholic fruit extract of Pithecellobium dulce

This study was carried out to evaluate the acute and sub-acute toxicity profile of the hydroalcoholic fruit extract (HAEPD) of Pithecellobium dulce (Leguminosae). Albino rats were treated orally with 100, 200 and 500?mg?kg(-1) bodyweight (BW) of HAEPD for 90 days to assess its sub-acute toxicity. HAEPD at single doses of 100, 500, 1000, 2000 and 4000?mg?kg(-1) BW was also administered to rats to assess its acute toxicity. The rats were observed for physical discomfort, BW change and feeding habits. Pithecellobium dulce did not cause any abnormal changes in haematological or biochemical parameters. Pathologically, no gross abnormality in the tissue architecture was observed. The LD(50) was found to be 3916?mg?kg(-1) BW and potential effective doses for efficacy studies are 100 and 300?mg?kg(-1) BW as the minimum and maximum doses, respectively. It is concluded that HAEPD can be used safely for experimental and clinical trials.     

2,3-Unsaturated enoses. A Pummerer rearrangement route to sugar vinyl sulfides and synthesis of 3-deoxy-3-alkyl/arylsulfinyl pyranosides

A Pummerer rearrangement of 2,3-dideoxy-3-alkyl/arylsulfinyl-arabino-hexopyranosides is reported. Treatment of sulfinyl-arabino-hexopyranoside derivatives, obtained through oxidation of the corresponding thio-derivatives, with trifluoroacetic anhydride (TFAA)/pyridine led to a facile formation of 2,3-dideoxy-3-alkyl/arylthio-hex-2-enopyranosides. Upon conversion of sugar vinyl sulfides to vinyl sulfoxides, conjugate addition reactions were conducted with alkoxides, to afford 3-deoxy-3-alkyl/arylsulfinyl pyranosides, in the manno-configuration exclusively. Whereas the conjugate addition reaction did not proceed with ether protecting groups, ester protecting groups and free hydroxyl groups in the sugar vinyl sulfoxide permitted the reaction.