Control of the temperature hysteresis and diffuse dielectric anomaly in the temperature range of the ferroelectric-antiferroelectric phase transition in PbZr1 − x TixO3 (0.03 ≤ x ≤ 0.05) ceramics

The magnitudes of the temperature hysteresis and diffuse dielectric anomaly corresponding to the transition from the antiferroelectric phase to the ferroelectric phase in PbZr_{1 ? x} Ti_xO₃ (0.03 ≤ x ≤ 0.05) ceramics can be reversibly changed by varying the temperatures of heating and cooling in the course of thermocycling. The results obtained indicate that the antiferroelectric-ferroelectric transition in the PbZr_{1 ? x} Ti_xO₃ ceramics materials is a smeared first-order phase transition.     

An observation on realcompact spaces

We give a characterization of realcompact spaces in terms of nets. By using the technique of this characterization we give easy proofs of the Tychonoff Theorem and the Alaoglu Theorem.

     

Mössbauer effect study of the decagonal quasicrystal Al65Co15Cu20

The ⁵⁷Fe Mössbauer effect study at 5.0 K and in an external magnetic field of 9.0 T on a high-quality stable decagonal quasicrystal Al₆₅Co₁₅Cu_19.9Fe_0.1 is presented. It is shown that the iron atoms are located in two distinct classes of sites. The values of the principal component of the electric field gradient tensor and the asymmetry parameter at these sites are, respectively, ?1.90(10)?×?10²¹ V/m², 0.97(15) and ?3.95(12)?×?10²¹ V/m², 0.00(17).     

Structure transition of single-texture CoSi2 nanolayer grown by refractory-interlayer-mediated epitaxy method

In this investigation, the crystalline structure of a nanometric CoSi₂ layer, formed in heat treated Co/W_xTa_(1−x)/Si(1 0 0) systems, has been studied by XRD analysis. Careful measurements of the diffraction intensities revealed that temporary formation of a metastable diamond cubic structure of CoSi₂ phase, rather than its usual CaF₂ structure, was occurred. It has been shown that formation of this metastable structure depends on the kind of the applied interlayer in addition to the annealing temperature. Among the studied systems with x = 0, 0.25, 0.5, 0.75 and 1, the second and the last systems resulted in growing a (1 0 0) single-texture CoSi₂ layer with the preferred usual CaF₂ structure, a strained lattice parameter, and the best thermal stability (900-1000 °C).     

Advances in constant-velocity Mössbauer instrumentation

A prototype of a programmable constant-velocity scaler is presented. This instrument allows the acquisition of partial Mössbauer spectra in selected energy regions using standard drivers and transducers. It can be fully operated by a remote application, thus data acquisition can be automated. The instrument consists of a programmable counter and a constant-velocity reference. The reference waveform generator is amplitude modulated with 13-bit resolution, and is programmable in a wide range of frequencies and waveforms in order to optimize the performance of the transducer. The counter is compatible with most standard SCA, and is configured as a rate-meter that provides counts per selectable time slice at the programmed velocity. As a demonstration of the instrument applications, a partial Mössbauer spectrum of a natural iron foil was taken. Only positive energies were studied in 512 channels, accumulating 20 s per channel. A line width of 0.20 mm/s was achieved, performing with an efficiency of 80%.     

Generation of red light at 660 nm by frequency doubling a Nd:YAG laser with periodically-poled stoichiometric LiTaO<Subscript>3</Subscript>

High power red light was generated from a periodically-poled stoichiometric LiTaO₃ (PPSLT) by single-pass frequency doubling of a diode-side-pumped, Q-switched Nd:YAG laser at 1319 nm. An average power of 2.4 W of the 660 nm red light was obtained at the fundamental power of ∼5.4 W with the conversion efficiency up to 44.4% and with low fluctuation down to 2%. The high efficiency and stability at the red output indicate that it is a practical method to construct a reliable compact red laser. PACS 42.70.Mp; 42.79.Nv; 42.55.Xi     

Structure and mechanical properties of Al/AlN multilayer with different AlN layer thickness

Nanometer scale Al/AlN multilayers have been prepared by dc magnetron sputtering technique with a columnar target. A set of Al/AlN multilayers with the Al layer thickness of 2.9 nm and the AlN layer thickness variation from 1.13 to 6.81 nm were determined. Low angle X-ray diffraction (LAXRD) was used to analyze the layered structure of multilayers. The phase structure of the coatings was investigated with grazing angle XRD (GAXRD). Mechanical properties of these multilayers were thoroughly studied using a nanoindentation and ball-on-disk micro-tribometer. It was found that the multilayer hardness and reduced modulus showed no strong dependence on the AlN layer thickness. Al2.9 nm/AlN1.13 nm multilayer had more excellent tribological properties than single layers and other proportion multilayers with a lowest friction coefficient of 0.15. And the tribological properties of all the multilayers are superior to the AlN single layer.     

Damage analysis of tetragonal perovskite structure ceramics implicated by asymptotic field solutions and boundary conditions

Cracking of ceramics with tetragonal perovskite grain structure is known to appear at different sites and scale level. The multiscale character of damage depends on the combined effects of electromechanical coupling, prevailing physical parameters and boundary conditions. These detail features are exhibited by application of the energy density criterion with judicious use of the mode I asymptotic and full field solution in the range of r/a=10⁻⁴ to 10⁻² where r and a are, respectively, the distance to the crack tip and half crack length. Very close to the stationary crack tip, bifurcation is predicted resembling the dislocation emission behavior invoked in the molecular dynamics model. At the macroscopic scale, crack growth is predicted to occur straight ahead with two yield zones to the sides. A multiscale feature of crack tip damage is provided for the first time. Numerical values of the relative distances and bifurcation angles are reported for the PZT-4 ceramic subjected to different electric field to applied stress ratio and boundary conditions that consist of the specification of electric field/mechanical stress, electric displacement/mechanical strain, and mixed conditions. To be emphasized is that the multiscale character of damage in piezoceramics does not appear in general. It occurs only for specific combinations of the external and internal field parameters, elastic/piezoelectric/dielectric constants and specified boundary conditions.     

Molecular crystal structure and chemical properties of 4-phenyl-3,5-diethoxycarbonyl-1,2,6-trimethyl-1,2-dihydropyridine

The molecular crystal structure of 4-phenyl-3,5-diethoxycarbonyl-1,2,6-trimethyl-1,2-dihydropyridine has been investigated by x-ray structural analysis. The three-dimensional structural properties of the molecule have been compared against the large observed reactivity of the 3-ethoxycarbonyl group with respect to nucleophilic substitution reactions.Translated from Khimiya Geterotsiklicheskikh Soedinenii, No. 9, pp. 1236–1239, September, 1991.