Total synthesis of the marine cytotoxic caulibugulones A-D

We report the first total synthesis of the cytotoxic marine alkaloids caulibugulone A-D. This synthesis confirmed the assigned structures and provided sufficient material for further biological testing.     

Sulfonated poly(aryl ether ether ketone ketone)s containing fluorinated moieties as proton exchange membrane materials

A series of sulfonated poly(aryl ether ether ketone ketone)s statistical copolymers with high molecular weights were synthesized via an aromatic nucleophilic substitution polymerization. The sulfonation content (SC), defined as the number of sulfonic acid groups contained in an average repeat unit, could be controlled by the feed ratios of monomers. Flexible and strong membranes in sodium sulfonate form could be prepared by the solution casting method, and readily transformed to their proton forms by treating them in 2 N sulfuric acid. The polymers showed high T_gs, which increased with an increase in SC. Membranes prepared from the present sulfonated poly(ether ether ketone ketone) copolymers containing the hexafluoroisopropylidene moiety (SPEEKK‐6F) and copolymers containing the pendant 3,5‐ditrifluoromethylphenyl moiety (SPEEKK‐6FP) had lower water uptakes and lower swelling ratios in comparison with previously prepared copolymers containing 6F units. All of the polymers possessed proton conductivities higher than 1 × 10^?2 S/cm at room temperature, and proton conductivity values of several polymers were comparable to that of Nafion at high relative humidity. Their thermal stability, oxidative stability, and mechanical properties were also evaluated. © 2006 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 44: 2299–2310, 2006     

DEUSS: a perdeuterated poly(oxyethylene)-based resin for improving HRMAS NMR studies of solid-supported molecules

A novel resin called DEUSS (perdeuterated poly(oxyethylene)-based solid support) has been prepared by anionic polymerization of deuterated [D4]ethylene oxide, followed by cross-linking with deuterated epichlorohydrin. DEUSS can be suspended in a wide range of solvents including organic and aqueous solutions, in which it displays a high swelling capacity. As measured by proton HRMAS of the swollen polymer, the signal intensity of the oxyethylene protons is reduced by a factor of 110 relative to the corresponding nondeuterated poly(oxyethylene)poly(oxypropylene) (POEPOP) resin, thus facilitating detailed HRMAS NMR studies of covalently linked molecules. This 1H NMR invisible matrix was used for the solid-phase synthesis of peptides, oligoureas, and a series of amides as well as their characterization by HRMAS NMR spectroscopy. On-bead NMR spectra of high quality and with resolution comparable to that of liquid samples were obtained and readily interpreted. The complete absence of the parasite resin signals will be of great advantage, for example, for the optimization of multistep solid-phase stereoselective reactions, and for the conformational study of resin-bound molecules in a large variety of solvents.     

The synthesis of imidazole-2-thione nucleosides

Ribosylation of the trimethylsilyl derivative ( 1b ) of imidazole-2-thione ( 1a ) using either stannic chloride or silver perchlorate as catalyst resulted in the formation of the acylated derivatives of 1-(β-D-ribofuranosyl)imidazole-2-thione ( 3c ) and 1,3-di-(β-D-ribofuranosyl)imidazole-2-thione ( 4c ) with the latter predominating ( 4c:3c , ca. 2:1 ). The diribosylated nucleoside 4c was shown to be the N,N-disubstituted product rather than the N,S-disubstituted product by ¹H nmr and ¹³C nmr spectroscopy. Employment of the iodine-catalyzed fusion procedure reversed the aforementioned product ratios and provided the monoriboside 3c in excellent yield. When the trimethylsilyl derivative ( 5b ) of 2-methylthioimidazole ( 5a ) was reacted with 2,3,5-tri-O-benzoyl-D-ribofuranosyl bromide ( 2d ) in acetonitrile, the major product was 1,3-di-(2,3,5-tri-O-benzoyl-β-D-ribofuranosyl)-imidazole-2-thione ( 4b ). The formation of 4b in this reaction is thought to arise via the Hilbert-Johnson mechanism.     

Kinetics of poly(ethylene terephthalate) glycolysis by diethylene glycol. I. Evolution of liquid and solid phases

The kinetics of uncatalysed glycolysis, at 220 °C, of poly(ethylene terephthalate) (PET) by diethylene glycol (DEG) in high excess has been studied. An experimental device allowing good separation, at reaction temperature, of the solid and liquid phases was set up.The results suggest that PET is initially depolymerized in the slightly swollen solid phase, by glycolysis of the amorphous interlamellar chains. This mechanism continues until a solid phase of highly crystallized polyester is obtained.The internal tensions engendered by this chemical modification cause cracks, delamination and mechanical disintegration of the polymer. The transfer towards the liquid phase is then strongly accelerated and the solvolysis of the depolymerization products continues in the liquid phase, up to equilibrium.     

New transesterification reaction between acetylated wood and tetramethoxysilane: A feasibility study

Novel transesterification of acetylated maritime pine sapwood (Pinus pinaster Soland) reaction was performed with tetramethoxysilane (TMOS) in presence of dibutyltin oxide as a catalyst. Transesterification was confirmed by weight percent gain calculations (WPG), infrared spectroscopy (FTIR) as well as ¹³C and ²⁹Si NMR CP-MAS analysis. The results showed that transesterification indeed occurs via exchange of acetate groups from acetylated wood and methoxysilane groups from TMOS. The effect of temperatures and reaction time upon transesterification efficiency was also investigated.     

An efficient way to 1,7-enynes and ethyl 8-yn-2-enoates from aldohexoses and to polyhydroxylated 1-vinylcyclohexenes

In this paper, we report the synthesis of carbohydrate-derived 1,7-enynes and subsequent metathesis to yield polyhydroxylated 1-vinylcyclohexenes. For example, we converted D-glucose 2 to the (6,7)-dideoxy-D-gluco-hept-6-ene-pyranose 7, which led to the desired 1,7-enyne 16. The ring-closing metathesis of this 1,7-enyne 16 with the second generation Grubbs catalyst, under Mori's conditions, gave the corresponding polyhydroxylated 1-vinylcyclohexene 25 in 76% yield. The conversion of several aldohexoses into polyhydroxylated 1-vinylcyclohexenes was carried out with satisfying yields. We report also the synthesis of two carbohydrate-derived ethyl 8-yn-2-enoates from D-glucose derivatives.     

Effects of alkali metal halide salts on the hydrogen bond network of liquid water

Measurements of the oxygen K-edge X-ray absorption spectrum (XAS) of aqueous sodium halide solutions demonstrate that ions significantly perturb the electronic structure of adjacent water molecules. The addition of halide salts to water engenders an increase in the preedge intensity and a decrease in the postedge intensity of the XAS, analogous to those observed when increasing the temperature of pure water. The main-edge feature exhibits unique behavior and becomes more intense when salt is added. Density functional theory calculations of the XAS indicate that the observed red shift of the water transitions as a function of salt concentration arises from a strong, direct perturbation of the unoccupied molecular orbitals on water by anions, and does not require significant distortion of the hydrogen bond network beyond the first solvation shell. This contrasts the temperature-dependent spectral variations, which result primarily from intensity changes of specific transitions due to geometric rearrangement of the hydrogen bond network.     

Comparative reactivity of glycols in PET glycolysis

The kinetics of poly(ethylene terephthalate) (PET) glycolysis by diethylene glycol (DEG), dipropylene glycol (DPG), glycerol (Gly) and mixtures of these glycols have been studied with two experimental procedures: uncatalysed at 220 °C and catalysed at 190 °C. An experimental device was set up allowing the isothermal kinetics to be monitored. A precise initial reaction time was obtained by separately warming the glycol and the polyester at the temperature of reaction before mixing them.The reactivity order of different glycols varies according to the conditions of temperature and catalysis. Schematically, the global reactivity does depend not only on the chemical reactivity of the glycol but also on its physico-chemical properties: ability to solvate the solid polyesters and polarity of the reaction mixture. Attempts to find synergic effects failed for almost all mixtures, except the mixture DPG + Gly in which the PET is digested more quickly than in pure DPG or Gly.