Micellar electrokinetic capillary chromatography as an alternative method for the determination of dexamethasone, trimethoprim, and polymyxin B

A micellar electrokinetic capillary chromatographic method is presented which enables quantification of dexamethasone, polymyxin B and trimethoprim in synthetic mixtures and pharmaceutical products. Separation was carried out at 25?°C and 30 kV, with 10 mmol L^–1 borate–phosphate buffer adjusted to pH 8 as electrolyte, with 50 mmol L^–1 sodium dodecyl sulfate. Under these conditions separations were performed in 10 min. The limits of detection and quantification were approximately 2 mg L^–1 for each component, except for polymyxin B. The method was applied to different commercial formulations.     

Rhenium-mediated coupling of acetonitrile and pyrazoles. New molecular clefts for anion binding

The reaction of fac-[ReBr(CO)3(NCMe)2] (1) with either pyrazole (Hpz) or 3,5-dimethylpyrazole (Hdmpz) in a 1:2 Re/pyrazole ratio affords the known complexes fac-[ReBr(CO)3(Hpz)2] (2) and [ReBr(CO)3(Hdmpz)2] (3). Using a 1:1 ratio, MeCN as solvent, and longer reaction times led to a mixture in which the major components are the pyrazolylamidino complexes fac-[ReBr(CO)3(HN=C(CH3)pz-kappa2N,N)] (4) and fac-[ReBr(CO)3(HN=C(CH3)dmpz-kappa2N,N)] (5). The complexes fac-[ReBr(CO)3(Hpz)(NCMe)] (6) and fac-[ReBr(CO)3(Hdmpz)(NCMe)] (7) (along with 2 and 3) were found to be minor components of these reactions. Analogous reactions of fac-[Re(OClO3)(CO)3(NCMe)2] yielded fac-[Re(NCCH3)(CO)3(HN=C(CH3)pz-kappa2N,N)]ClO4 (8), fac-[Re(NCCH3)(CO)3(HN=C(CH3)dmpz-kappa2N,N)]ClO4 (9), fac-[Re(Hpz)(CO)3(HN=C(CH3)pz-kappa2N,N)]ClO4 (10), and fac-[Re(Hdmpz)(CO)3(HN=C(CH3)dmpz-kappa2N,N)]ClO4 (11). The X-ray structure of 11 showed the perchlorate anion to be hydrogen-bonded by the N-H groups of the pyrazole and pyrazolylamidino ligands. The behavior of the compound fac-[Re(Hdmpz)(CO)3(HN=C(CH3)dmpz-kappa2N,N)]BAr'4 (13) (synthesized by reaction of [ReBr(CO)3(Hdmpz)2] (3) with (i) AgOTf and (ii) NaBAr'(4)/MeCN) as an anion receptor has been studied in CD3CN solution. In addition, the structure of the supramolecular adduct fac-[Re(CO)3(Hdmpz)(HN=C(CH3)dmpz-kappa2N,N)].Cl (14), featuring chloride binding by the two N-H groups, was determined by X-ray diffraction.     

Numerical and analytical studies of the electrical conductivity of a concentrated colloidal suspension

In the past few years, different models and analytical approximations have been developed facing the problem of the electrical conductivity of a concentrated colloidal suspension, according to the cell-model concept. Most of them make use of the Kuwabara cell model to account for hydrodynamic particle-particle interactions, but they differ in the choice of electrostatic boundary conditions at the outer surface of the cell. Most analytical and numerical studies have been developed using two different sets of boundary conditions of the Neumann or Dirichlet type for the electrical potential, ionic concentrations or electrochemical potentials at that outer surface. In this contribution, we study and compare numerical conductivity predictions with results obtained using different analytical formulas valid for arbitrary zeta potentials and thin double layers for each of the two common sets of boundary conditions referred to above. The conductivity will be analyzed as a function of particle volume fraction, phi, zeta potential, zeta, and electrokinetic radius, kappaa (kappa(-1) is the double layer thickness, and a is the radius of the particle). A comparison with some experimental conductivity results in the literature is also given. We demonstrate in this work that the two analytical conductivity formulas, which are mainly based on Neumann- and Dirichlet-type boundary conditions for the electrochemical potential, predict values of the conductivity very close to their corresponding numerical results for the same boundary conditions, whatever the suspension or solution parameters, under the assumption of thin double layers where these approximations are valid. Furthermore, both analytical conductivity equations fulfill the Maxwell limit for uncharged nonconductive spheres, which coincides with the limit kappaa --> infinity. However, some experimental data will show that the Neumann, either numerical or analytical, approach is unable to make predictions in agreement with experiments, unlike the Dirichlet approach which correctly predicts the experimental conductivity results. In consequence, a deeper study has been performed with numerical and analytical predictions based on Dirichlet-type boundary conditions.     

Simultaneous Determination of Hydrocortisone and Zn-Bacitracin by Spectrophotometric Derivative and Multivariate Methods

 Four spectrophotometric methods are described and applied to resolve binary mixtures of the corticosteroid hydrocortisone and the antibacterial polypeptide Zn-Bacitracin. The simultaneous determination of the two compounds was accomplished by means of derivative methods, which were satisfactory used to determine synthetic mixtures of these compounds in different ratios and in pharmaceutical preparations (only for hydrocortisone). Direct absorption spectra of compounds were used to optimise the spectral data set performs the calibration by PLS-1, PLS-2 and PCR algorithms. These calibration models were evaluated through internal validation (prediction of compounds in its own designed training set of calibration), cross-validation (obtaining statistical parameters that show the efficiency for a calibration fit model) and external validation over synthetic and pharmaceutical mixtures. The four described procedures do not require any separation step. Precision studies were achieved over two series of ten standards for each compound showing no significant differences at 95% confidence level in the two spectrophotometric methods. The results found in commercial products were compared with those obtained by means of MEKC method and similar values were found. Correspondence: Department of Analytical Chemistry and Food Technology, Universidad de Castilla-La Mancha, 13071 Ciudad Real, Spain. e-mail: JoseMaria.Lemus@uclm.es Received January 25, 2002; accepted October 22, 2002     

Test strip for determination of nitrite in water

A disposable test strip is proposed for the determination of nitrite in waters. The strip is an inert rectangular strip of polyester with a 6 mm o.d. circular, transparent and colorless film attached to its surface. This film contains the chemicals required for reaction and fixation of the dye formed, sulfanilamide, N-(1-naphthyl)ethylenediamine on Nafion. When the test strip is placed in an acidified (pH 2.0) sample solution containing nitrite a red-violet color develops; the absorbance of this is measured at 536 nm. The linear range of the method depends on the time of equilibration of the test strip with the sample solution. When the equilibration time was 45 min, the linear range was 8.9-500 microg L(-1) whereas for an equilibration time of 60 min it was 4.7-200 microg L(-1). The detection limit was 1.4 microg L(-1) for an equilibration time of 60 min. The precision of the method, expressed as RSD, was 8.8 % at 100.0 microg L(-1). The method was applied, and validated chemometrically, for the determination of nitrite in different types of water (spring, mineral, tap, well, and sea).     

Mass spectrometric study of tricarbonyl (eta(6)-phenyl methanols) of chromium(0)

A mass spectrometric study of several tricarbonyl (eta(6)-phenyl methanols) of chromium(0) was performed. Electron ionization (EI), chemical ionization (CI) and fast atom bombardment (FAB) mass spectra were acquired for each molecule, and compared in order to establish a general fragmentation pattern. The suggested pathways were investigated and confirmed by means of constant b/e linked scans and high resolution data. In addition a Hammett-McLafferty correlation for some peaks derived from the molecular ions was accomplished.     

Electrokinetics of concentrated suspensions of spherical colloidal particles with surface conductance, arbitrary zeta potential, and double-layer thickness in static electric fields

In this paper the electrophoretic mobility and the electrical conductivity of concentrated suspensions of spherical colloidal particles have been numerically studied under arbitrary conditions including zeta potential, particle volume fraction, double-layer thickness (overlapping of double layers is allowed), surface conductance by a dynamic Stern layer model (DSL), and ionic properties of the solution. We present an extensive set of numerical data of both the electrophoretic mobility and the electrical conductivity versus zeta potential and particle volume fraction, for different electrolyte concentrations. The treatment is based on the use of a cell model to account for hydrodynamic and electrical interactions between particles. Other theoretical approaches have also been considered for comparison. Furthermore, the study includes the possibility of adsorption and lateral motion of ions in the inner region of the double layers (DSL model), according to the theory developed by C. S. Mangelsdorf and L. R. White (J. Chem. Soc. Faraday Trans.86, 2859 (1990)). The results show that the correct limiting cases of low zeta potentials and thin double layers for dilute suspensions are fulfilled by our conductivity formula. Moreover, the presence of a DSL causes very important changes, even dramatic, on the values of both the electrophoretic mobility and the electrical conductivity for a great range of volume fractions and zeta potentials, specially when double layers of adjacent cells overlap, in comparison with the standard case (no Stern layer present). It can be concluded that in general the presence of a dynamic Stern layer causes the electrophoretic mobility to decrease and the electrical conductivity to increase in comparison with the standard case for every volume fraction, zeta potential, and double-layer thickness.     

Persistence of layer motifs in the crystal structures of [1,4-bis-(2-methoxy-2-carbonylethyl)piperazinium (2’)] chloride and [1,4-bis-(2-amidoethyl)piperazinium (2’)] perchlorate

Two structures of the closely related piperazinium salts, [1,4-bis-(2-methoxy-2-carbonylethyl)piperazinium (2+)] chloride (1) and [1,4-bis-(2-amidoethyl)piperazinium (2+)] perchlorate (2) reveal the persistence of a layer structure, interspersed with anions, held in place by N–H···Cl, C–H···O and C–H···Cl interactions in the case of 1, and N–H···O and C–H···O interactions in the case of 2. Compound 1 crystallizes in the triclinic space group P-1 with a=6.7667(6) ?, b = 6.9467(6) ?, c=9.3880(18) ?, α=105.845(9)°, β=99.896(16)°, γ=103.600(9)°, and Z=1. Compound 2 crystallizes in the monoclinic space group P2₁/c with a = 9.0930(8) ?, b=10.0525(11) ? c=10.2104(13) ?, β=114.279(9)°, and Z=2.     

Promotion of 1,3-dithiolanes using a bentonitic clay as catalyst

The reactions between 1,2-ethandithiol with several carbonylic compounds to form the corresponding 1,3-dithiolanes were performed using a natural clay as promotor. The target molecules are used as reagents to obtain fine chemicals, herbicides, fungicides, and pharmaceutical compounds among others applications. A kinetic study of camphorquinone and 1,2-ethandithiol showed a first-order dependence with 1,2-ethandithiol as well as with camphorquinone. The substrate transformation in percent was found to be dependent with the reaction time, the amount of catalyst, and the reagents concentration. © 2003 Wiley Periodicals, Inc. 15:71–76, 2004; Published online in Wiley InterScience (www.interscience.wiley.com). DOI 10.1002/.10215