Synthesis and photocatalytic properties of sunlight-responsive BiOBr–CoWO4 heterostructured nanocomposites

Efficient sunlight-responsive BiOBr–CoWO₄ heterostructured nanocomposite photocatalysts were prepared via a chemical precipitation route at 100°C in 4 hours. The prepared BiOBr–CoWO₄ heterostructures were characterized for phase identification, chemical composition, surface morphology, optical properties and surface area using various techniques. The X-ray diffraction pattern of the BiOBr–CoWO₄ nanocomposite was composed of diffraction peaks equivalent to both the tetragonal phase of BiOBr and the monoclinic phase of CoWO₄ nanoparticles. X-ray photoelectron spectral study of the BiOBr–CoWO₄ nanocomposite revealed orbitals of both BiOBr and CoWO₄ compounds. Transmission electron microscopy images revealed that spherical particles of CoWO₄ (20–25 nm) were dispersed on the surface of BiOBr. UV–visible–near-infrared spectral study of the BiOBr–CoWO₄ nanocomposite showed good visible-light absorption. Among the manufactured materials, BiOBr–CoWO₄-2 nanocomposite showed better charge carrier separation efficiency, as demonstrated by photoluminescence and time-resolved fluorescence. To study the practical utility of the prepared materials, their photocatalytic capability was examined for the degradation of rhodamine B (RhB) aqueous solution under sunlight irradiation. The photodegradation results showed that BiOBr–CoWO₄-2 nanocomposite degraded 98.69% RhB solution and the degradation constant was 0.067 min⁻¹, which was 5.6 and 22.5 times larger than that of pure BiOBr and CoWO₄ nanoparticles, respectively, after 60 minutes of sunlight irradiation. The superior photoactivity was facilitated by electron–hole pair separation and transfer driven by the heterostructure interface between BiOBr particles and CoWO₄ nanoparticles. The removal of RhB was initiated by photogenerated h⁺, O₂^{• −} and ^•OH reactive species based on the scavenger effect.     

“Grafting through” polymerization involving surface-bound monomers

“Grafting through” polymerization represents copolymerization of free monomers in solution and polymerizable units bound to a substrate. Free polymer chains are formed initially in solution and can incorporate the surface-bound monomers, and thereby, get covalently bonded to the surface during the polymerization process. As more growing chains attach to the surface-bound monomers, an immobilized polymer layer is formed on the surface. We use a combination of computer simulation and experiments to comprehend this process for monomers bound to a flat impenetrable substrate. We concentrate specifically on addressing the effect of spatial density of the surface-bound monomers on the formation of the surface-attached polymers. We employ a lattice-based Monte Carlo model utilizing the bond fluctuation model scheme to provide molecular-level insight into the grafting process. For experimental validation, we create gradients of density of bound methacrylate units on flat silicon wafers using organosilane chemistry and carry out “grafting through” free radical polymerization initiated in bulk. We report that the proximity of the surface-bound polymerizable units promotes the “grafting through” process but prevents more free growing chains to “graft through'' the polymerizable units. The “grafting through” process is self-limiting in nature and does not affect the overall density of the surface-bound polymer layer, except in case of the highest theoretical packing density of surface-bound monomers. © 2015 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2016, 54, 263–274     

Antioxidative and anticarcinogenic activities of methylpheophorbide a,isolated from wheat grass (Triticum aestivum Linn.)

Methylphophorbide a (MPa) has been isolated from the ethanol extract of the wheat grass plant. Its antioxidative efficacy is evaluated by hydroxyl radical scavenging activities and reducing capacity which are significantly up regulated in comparison with aqueous extract of the plant. The compound shows iron-binding capacity where the Fe²⁺ binds with MPa by two types of binding patterns with dissociation constants 157.17 and 27.89. It has antioxidative and cytotoxic effects on HeLa and Hep G2 cells. The cancerous cell survivability decreases with increasing concentration of MPa. These findings have provided evidence for the traditional use of the wheat grass plant in the treatment of cancers, oxidative stress and iron overloaded disorders.     

Where is SUSY?

The searches for supersymmetry at the Large Hadron Collider (LHC) have so far yielded only null results and have considerably tightened the bounds on the sparticle masses. This has generated some skepticism in the literature regarding the ‘naturalness of SUSY’ which qualitatively requires some sparticles to be relatively light. Re-examining some of the bounds from LHC searches, it is argued with specific examples that the above skepticism is a red herring because (i) a quantitative and universally accepted definition of ‘naturalness’ is not available and (ii) even if some conventional definitions of naturalness is accepted at their face values, the alleged tension with the apparently stringent LHC bounds wither away once the strong assumptions, by no means compelling, underlying such bounds are relaxed.     

Figures of merit of magnetostrictive single crystal iron-gallium alloys for actuator and sensor applications

Energy density, magnetomechanical coupling factor and a dimensionless sensing gage factor of 〈1 0 0〉 oriented single crystal iron-gallium alloys with 16, 17.5, 19, 24.7 and 29 at% gallium were studied as functions of stress and magnetic field. To estimate these quantities, the samples were characterized under different quasi-static stress and magnetic field conditions. The experimental behavior was modeled using an energy-based non-linear approach. Both the experimental data and the model simulations were used to calculate material parameters such as magnetic permeability, piezo-magnetic strain coefficient (d₃₃), inverse piezo-magnetic coefficient (stress sensitivity, d*₃₃) and Young's modulus in the material. These quantities were used to obtain energy density, magnetomechanical coupling factor and sensing gage factor as functions of magnetomechanical conditions. Maximum energy density of around 3 kJ/m³, magnetomechanical coupling factor higher than 0.75 and sensing gage factor on the order of 10³ were calculated.     

Orientational order parameter studies on 3.Om and 3O.Om liquid crystals

Orientational order parameter S is evaluated in the nematic phase of six liquid crystal compounds, N-(p-n-propyl benzylidene)-p-n-alkoxy anilines, 3.Om and N-(p-n-propyloxy benzylidene)-p-n-alkoxy anilines, 3O.Om compounds with m = 6, 7 and 8, using different methods. The techniques employed are S from birefringence δn, Haller's approximation from (1?T/T_c) ^β, effective geometry parameter α_g and Vuks’ scaling factor S_C. The values of S obtained using the above methods are compared with one another and with the results on a number of liquid crystals; the liquid crystals favor isotropic Vuks’ method.     

Octahedral CuII and NiII complexes manifesting with N′-[1-(pyridin-2-yl)ethylidene] acetohydrazide: Structural outlooks and spectral characteristics

A tridentate hydrazone precursor, N′-[1-(pyridin-2-yl)ethylidene]acetohydrazide (L) (1:1 refluxed product of acetichydrazide and 2-acetylpyridine), produced two octahedral Cu^II and Ni^II derivatives, [CuL₂]·NO₃ (1) and [NiL₂]·ClO₄·H₂O (2). Both are subjected to X-ray diffraction system, and structural investigation shows that the central metal atom (Cu^II or Ni^II) adopts a distorted octahedral geometry with N₄O₂ donor sets by coordination of a pair of independent hydrazone precursors. Besides X-ray study, IR and UV-vis spectra, thermal analysis and room temperature magnetic moments are utilized for establishing significant characteristics of both complexes. It is apparent that the M-N_pyridine bonds are slightly longer than the M-N_imino bonds, Cu1-N1 and Cu1-N4 [2.300(2) and 2.038(2) ?] for 1 and Ni1-N1 and Ni1-N4 [2.075(2) and 2.084(1) ?] for 2, Cu1-N2 and Cu1-N5 [2.062(1) and 1.932(1) ?] for 1 and Ni1-N2 and Ni1-N5 [2.008(2) and 1.975(2) ?] for 2, respectively. As per our observation, the effective magnetic moment value (μ_eff) is found to be 1.77 B.M. for 1 and 3.06 BM for 2, respectively.     

Reductive Cleavage of tert-Butyldimethylsilyl Ether via Intramolecular Transfer of Hydride

The cleavage of α-hydroxy tert-butyldimethylsilyl ether to diol takes place efficiently with LAH. It has been proposed that the reaction proceeds via intramolecular hydride transfer from the alkoxy aluminium hydride. In order to substantiate this, reduction of TBDMS ether with LAH in a variety of substrates was studied.     

A Simple,Efficient and Green Procedure for the Knoevenagel Condensation of Aldehydes with N-Methylpiperazine at Room Temperature under Solvent-Free Conditions

Knoevenagel condensation of aromatic, aliphatic, and heteroaromatic aldehydes with active methylene compounds such as ethylcyanoacetate, malononitrile, and cyanoacetamide proceed very smoothly at room temperature by simply mixing the ingredients together under solvent-free conditions in the presence of N-methylpiperazine in excellent yields of the E-configured products.     

Synthesis,Characterization, and Possible Applications of ZnO Nanocrystals

ZnO nanocrystals are synthesized using the quenching method. The properties of the grown nanocrystals are studied using ultraviolet-vis spectroscopy, x-ray diffraction, photoluminescence, electron diffraction, energy dispersive x-ray spectroscopy, and high resolution transmission electron microscopy. Current-voltage characteristics of the prepared samples are studied for investigating the possible application of the samples as switch and memristor.