Structural damping identification method using normal FRFs

All structures exhibit some form of damping, but despite a large literature on the damping, it still remains one of the least well-understood aspects of general vibration analysis. The synthesis of damping in structural systems and machines is extremely important if a model is to be used in predicting vibration levels, transient responses, transmissibility, decay times or other characteristics in design and analysis that are dominated by energy dissipation. In this paper, new structural damping identification method using normal frequency response functions (NFRFs) which are obtained experimentally is proposed and tested with the objective that the damped finite element model is able to predict the measured FRFs accurately. The proposed structural damping identification is a direct method. In the proposed method, normal FRFs are estimated from the complex FRFs, which are obtained experimentally of the structure. The estimated normal FRFs are subsequently used for identification of general structural damping. The effectiveness of the proposed structural damping identification method is demonstrated by two numerical simulated examples and one real experimental data. Firstly, a study is performed using a lumped mass system. The lumped mass system study is followed by case involving numerical simulation of fixed–fixed beam. The effect of coordinate incompleteness and robustness of method under presence of noise is investigated. The performance of the proposed structural damping identification method is investigated for cases of light, medium, heavily and non-proportional damped structures. The numerical studies are followed by a case involving actual measured data for the case of a cantilever beam structure. The results have shown that the proposed damping identification method can be used to derive an accurate general structural damping model of the system. This is illustrated by matching the damped identified FRFs with the experimentally obtained FRFs.     

Photocyclisation of 3-alkoxy-6-chloro-2-(3-methylthiophen-2-yl)-4H-chromen-4-ones

Photocyclisation of 3-alkoxy-6-chloro-2-(3-methylthiophen-2-yl)-4H-chromen-4-ones in methanol with pyrex filtered UV-light lead to the formation of tetracyclic compounds through intramolecular γ-hydrogen abstraction. The methyl group on the thiophenyl ring does not interfere in the photocyclisation although it does effect the product formation.     

Paired pulse voltammetry for differentiating complex analytes

Although fast-scan cyclic voltammetry (FSCV) has contributed to important advances in neuroscience research, the technique is encumbered by significant analytical challenges. Confounding factors such as pH change and transient effects at the microelectrode surface make it difficult to discern the analytes represented by complex voltammograms. Here we introduce paired-pulse voltammetry (PPV), that mitigates the confounding factors and simplifies the analytical task. PPV consists of a selected binary waveform with a specific time gap between each of its two comprising pulses, such that each binary wave is repeated, while holding the electrode at a negative potential between the waves. This allows two simultaneous yet very different voltammograms (primary and secondary) to be obtained, each corresponding to the two pulses in the binary waveform. PPV was evaluated in the flow cell to characterize three different analytes, (dopamine, adenosine, and pH changes). The peak oxidation current decreased by approximately 50%, 80%, and 4% for dopamine, adenosine, and pH, in the secondary voltammogram compared with the primary voltammogram, respectively. Thus, the influence of pH changes could be virtually eliminated using the difference between the primary and secondary voltammograms in the PPV technique, which discriminates analytes on the basis of their adsorption characteristics to the carbon fiber electrode. These results demonstrate that PPV can be effectively used for differentiating complex analytes.     

Effect of hydrophilic polymer on complexing efficiency of cyclodextrins towards efavirenz-characterization and thermodynamic parameters

The present work describes the effect of PVP on the complexation efficiency of cyclodextrins towards efavirenz, a poorly soluble antiretroviral agent imparting irritating sensation to buccal cavity. The phase solubility study indicates 1:1 stoichiometry for binary and ternary systems. DSC and XRPD revealed complete inclusion only in the lyophilized systems. The ternary systems were autoclaved before being lyophilized for the best results. Proton NMR suggests that the chlorobenzene part of benzoxazinone ring of the drug is involved in inclusion and was confirmed by 2D-COESY. The thermodynamic parameters, indicative of complexation efficiency were calculated calorimetrically by determining the interaction enthalpy of efavirenz with cyclodextrins in the presence and absence of PVP. The value of stability constants increased in the order β-CD?<?HP-β-CD?<?M-β-CD and is still higher in the presence of PVP illustrating the facilitation of the inclusion. Molar enthalpy of interaction of autoclaved solid formulation determined calorimetrically indicated stronger interaction for efavirenz:M-βCD-PVP system (?12.20?kJ/mol) which showed highest solubility and dissolution rate. The in vitro measurement of permeability showed a ten fold increase in the flux for the autoclaved formulation containing efavirenz-M-β-CD-PVP. In conclusion, encapsulation by cyclodextrins increases the solubility and suppresses the oral irritation of efavirenz. PVP further increases the complexation efficiency and decreases the bulk of cyclodextrins.     

Seismic Reflection from an Interface Between an Elastic Solid and a Fractured Porous Medium with Partial Saturation

The theory of Tuncay and Corapcioglu (Transp Porous Media 23:237–258, 1996a) has been employed to investigate the possibility of plane wave propagation in a fractured porous medium containing two immiscible fluids. Solid phase of the porous medium is assumed to be linearly elastic, isotropic and the fractures are assumed to be distributed isotropically throughout the medium. It has been shown that there can exist four compressional waves and one rotational wave. The phase speeds of these waves are found to be affected by the presence of fractures, in general. Of the four compressional waves, one arises due to the presence of fractures in the medium and the remaining three are those encountered by Tuncay and Corapcioglu (J Appl Mech 64:313–319, 1997). Reflection and transmission phenomena at a plane interface between a uniform elastic half-space and a fractured porous half-space containing two immiscible fluids, are analyzed due to incidence of plane longitudinal/transverse wave from uniform elastic half-space. Variation of modulus of amplitude and energy ratios with the angle of incidence are computed numerically by taking the elastic half-space as granite and the fractured porous half-space as sandstone material containing non-viscous wetting and non-wetting fluid phases. The results obtained in case of porous half-space with fractures, are compared graphically with those in case of porous half-space without fractures. It is found that the presence of fractures in the porous half-space do affect the reflection/transmission of waves, which is responsible for raising the reflection and lowering the transmission coefficients.     

Role of magnetic shear on the electrostatic current driven ion-cyclotron instability in the presence of parallel electric field

Recent observation and theoretical investigations have led to the significance of electrostatic ion cyclotron (EIC) waves in the electrodynamics of acceleration process. The instability is one of the fundamental of a current carrying magnetized plasma. The EIC instability has the lowest threshold current among the current driven instabilities. On the basis of local analysis where inhomogeneities like the magnetic shear and the finite width current channel, have been ignored which is prevalent in the magnetospheric environment. On the basis of non-local analysis interesting modification has been incorporated by the inclusion of magnetic shear. In this paper we provide an analytical approach for the non-local treatment of current driven electrostatic waves in presence of parallel electric field. The growth rate is significantly influenced by the field aligned electron drift. The presence of electric field enhances the growth of EIC waves while magnetic shear stabilizes the system.     

Synthesis and Antiinflammatoryand Anticancer Activity Evaluation of Some Condensed Pyrimidines

Summary.  Upon condensation with 4-isothiocyanato-4-methyl-2-pentanone, 2,3-diaminonaphthalene and N-aminoethyladenosine gave in good yields substituted pyrimidonaphthoimidazole and imidazopyrimidine thione. Refluxing pyrimidobenzthiazole with methanol H₂SO₄ at pH∼1 resulted in S-methyl pyrimidobenzthiazole in moderate yield. Pyrimidobenzimidazole derivatives could be reacted to S-alkylated and N-acylated derivatives by refluxing with ethyl bromoacetate in the presence of anhydrous potassium carbonate in THF and by heating in an acetic acid/acetic anhydride mixture. Heating of pyrimidobenzimidazole with 75% aqueous H₂SO₄ on a water bath ended up in a rearranged product. All compounds gave correct ¹H NMR, IR, and HR mass spectra. Results of antiinflammatory, analgesic, and anticancer activity screening of the new compounds are described. Received October 29, 1999. Accepted (revised) January 13, 2000     

Synthesis and characterization of cadmium tartrate single crystals

Efforts have been successful to crystallize the electroceramic compound of cadmium tartrate through silica hydrogel. Analysis of thermograms reveals decomposition of the crystals to take place within the temperature range 65 to 442°C in air atmosphere. Some important characteristic data, i.e., valance electron plasma energy, Penn gap, Fermi energy, interionic distance, electronic polarizability have been obtained. The DC conductivity of the crystal typically lies between the conductivities of metal and insulator and we derived several pertinent parameters such as hopping energy, hopping distance, coulomb gap, etc. The micromechanical indentation of the crystal shows nonlinear variation of the impact microhardness as a function of the applied load. The estimation of fracture toughness, fragility coefficient and yield strength has too been made for the synthesized crystal. (© 2007 WILEY‐VCH Verlag GmbH & Co. KGaA, Weinheim)