Structural,dielectric and ac conductivity properties of Ni-doped HoFeO3 before and after gamma irradiation

A series of samples of HoFe_1?x Ni _x O₃ (x = 0.0, 0.1, 0.3) were prepared using the solid-state reaction technique to understand the structural, dielectric and conductivity properties before and after gamma irradiation of accumulated dose of 625 KGy. The X-ray diffraction confirms that all the samples exist in single-phase orthorhombic structure having space group Pbnm. With increasing dopant Ni, the unit cell volume and lattice parameters undergo small change. X-ray analysis show change in the interplanar spacing and full width at half maximum values after gamma irradiation. The Raman spectra of the samples show modifications after gamma irradiation. It can be easily seen that after gamma irradiation intensity, peak width are completely altered by gamma-absorbed dose. Measurement of dielectric loss and dielectric constant at room temperature was performed before and after gamma irradiation in the frequency range of 20 Hz–1 MHz. It is observed that the value of dielectric constant decreases after irradiation. The ac conductivity is estimated from the dielectric constant and loss tangent. Exposure to gamma radiation results in substantial modification in the physical properties of the Ni-doped Ho-based orthoferrites.     

Direct Similarity Analysis of Generalized Burgers Equations and Perturbation Solutions of Euler–Painlevé Transcendents

Similarity reductions of the generalized Burgers equation     , where α, β, and γ are non-negative constants, n a positive integer and   j = 0, 1, 2  , are obtained by the direct method of Clarkson and Kruskal [ 1 ]. This is the first work to report the similarity variables as an incomplete gamma function and also as a power of     , and to provide a perturbation solution of an Euler–Painlevé transcedent.     

Highly facile and stereoselective intramolecular [2 +2]photocycloadditions of bis(alkenoyl)ketenedithioacetals

The conformational change induced by the introduction of a ketenedithioacetal moiety at C-4 of 1,7-substituted-1,6-heptadiene-3,5-diones results in favorable spatial relationships between the alkenoyl groups to effect efficient intramolecular cycloadditions: irradiation of bis(alkenoyl)ketenedithioacetals in solution leads to facile and stereospecific intramolecular [2 + 2] photocycloadditions resulting in the formation of substituted bicyclo[3.2.0]heptane-2,4-diones, the observed conformational rigidity of which is attributed to the push-pull character of the ketenedithioacetal group.     

Influence of the distal his in imparting imidazolate character to the proximal his in heme peroxidase: (1)h NMR spectroscopic study of cyanide-inhibited his42-->ala horseradish peroxidase

The functional higher oxidation states of heme peroxidases have been proposed to be stabilized by the significant imidazolate character of the proximal His. This is induced by a "push-pull" combination effect produced by the proximal Asp that abstracts ("pulls") the axial His ring N(delta)H, along with the distal protonated His that contributes ("pushes") a strong hydrogen bond to the distal ligand. The molecular and electronic structure of the distal His mutant of cyanide-inhibited horseradish peroxidase, H42A-HRPCN, has been investigated by NMR. This complex is a valid model for the active site hydrogen-bonding network of HRP compound II. The (1)H and (15)N NMR spectral parameters characterize the relative roles of the distal His42 and proximal Asp247 in imparting imidazolate character to the axial His. 1D/2D spectra reveal a heme pocket molecular structure that is highly conserved in the mutant, except for residues in the immediate proximity of the mutation. This conserved structure, together with the observed dipolar shifts of numerous active site residue protons, allowed a quantitative determination of the orientation and anisotropies of the paramagnetic susceptibility tensor, both of which are only minimally perturbed relative to wild-type HRPCN. The quantitated dipolar shifts allowed the factoring of the hyperfine shifts to reveal that the significant changes in hyperfine shifts for the axial His and ligated (15)N-cyanide result primarily from changes in contact shifts that reflect an approximately one-third reduction in the axial His imidazolate character upon abolishing the distal hydrogen-bond to the ligated cyanide. Significant changes in side chain orientation were found for the distal Arg38, whose terminus reorients to partially fill the void left by the substituted His42 side chain. It is concluded that 1D/2D NMR can quantitate both molecular and electronic structural changes in cyanide-inhibited heme peroxidase and that, while both residues contribute, the proximal Asp247 is more important than the distal His42 in imparting imidazole character to the axial His 170.     

The reaction of 2‐aroyl‐3,3‐bis(alkylsulfanyl)acrylaldehydes and hydroxylamine hydrochloride: Facile synthesis of differently substituted isoxazoles

2‐Aroyl‐3,3‐bis(alkylsulfanyl)acrylaldehyde was utilized for the synthesis of three different isoxazoles by reacting with hydroxylaminehydrochloride. We synthesized differently substituted isoxazoles like (aryl)[5‐(methylsulfanyl)‐4‐isoxazolyl]methanones, 3‐(methylsulfanyl)‐5‐phenyl‐4‐isoxazolecarbonitriles and 5‐aryl‐3‐(methylsulfanyl)‐4‐isoxazolecarbaldehyde oximes in good yields by varying the substratereagent stoichiometry and temperature of the reaction medium.     

Alkylation of aryl 3-oxopropanedithioate and 3-amino-1-aryl-3-thioxo-1-propanones as an effective tool for the construction of differently substituted thiophenes and annulated thiophenes

The alkylation of aryl 3-oxopropanedithioate with α-haloketones under different reaction conditions afforded substituted aryl[2-(methylsulfanyl)-4-phenyl-3-thienyl]methanones and [3-aryl-5-(methylsulfanyl)-2-thienyl](phenyl)methanones. The same strategy was extended to 3-amino-1-aryl-3-thioxo-1-propanones to afford aryl[2-amino-4-phenyl-3-thienyl]methanones and ethyl 3-phenyl-5-piperidino-2-thiophene carboxylate.     

Facile extraction,processing and characterization of biorenewable sisal fibers for multifunctional applications

Synthetic fibers based materials have replaced most of the traditional metallic/ceramic materials for a number of applications owing to their enormous properties such as light weight, specific strength and modulus to name a few. Unfortunately, the traditional synthetic fibers are not desired from the health and environmental point of view. So, in this work, we have carried out the isolation, processing and characterization of cellulosic sisal fibers. These fibers were extracted for the first time by a simple and new unique mechanical extraction technique without affecting the quality of fibers. Subsequently these cellulosic sisal fibers were thoroughly characterized for their physicochemical, microstructure and mechanical properties. These fibers were then converted into fine textured sisal textile yarn made out of 3–6 sisal fibers in continuous operation and used for the preparation of new green materials. Different properties of fine textured sisal textile and the impact of sisal fine textile on the physical, microstructural, thermal and mechanical characteristics of the green materials were studied and discussed in detail.     

The presence of a thermally reversing window in Al-Te-Si glasses revealed by alternating differential scanning calorimetry and electrical switching studies

Alternating differential scanning calorimetric (ADSC) studies and electrical switching experiments have been undertaken on Al₁₅Te_85−xSi_x (2 ? x ? 12) system of glasses. These glasses are found to exhibit two crystallization reactions (T_c1 and T_c2), for compositions with x < 8. Above x = 8, a single-stage crystallization is seen. Further, a trough is seen in the composition dependence of non-reversing enthalpy (ΔH^NR), based on which it is proposed that there is a thermally reversing window in Al₁₅Te_85−xSi_x glasses, in the composition range 4 ? x ? 8. Electrical switching studies indicate that Al₁₅Te_85−xSi_x glasses exhibit a threshold type electrical switching at ON state currents less than 2 mA. Further, the switching voltages are found to increase with the increase in silicon content. It is interesting to note that the start (x = 4) and the end (x = 8) of the thermally reversing window are exemplified by a kink and a saturation in the composition dependence of switching voltages, respectively.     

Effect of swift heavy ions in Ni-Al nanocrystalline films studied by X-ray absorption spectroscopy

X-ray absorption spectroscopic measurements have been used to compare the electronic structures of swift heavy ions (100 MeV Si ions) irradiated and pristine Ni-Al nanocrystalline films. Results from X-ray diffraction (XRD), X-ray absorption near-edge structure (XANES) spectra at Al K-, and Ni L(2,3)-edges and extended X-ray absorption fine structure (EXAFS) at Ni K-edges are discussed. The observed XRD peaks indicate the improvement of crystalline nature and Al(111) clustering after the swift heavy ion interactions. While the XANES spectra at Ni L(2,3)-edges show decrease in the intensity of white line strength, the Al K-edge shows increase in intensity after irradiation. Above results imply that swift heavy ions induce low Z (i.e., Al) ion mass transport, changes in Al sp-Ni-d hybridization, and charge transfer. EXAFS results show that crystalline nature is improved after swift heavy irradiation which is consistent with XRD results.     

The composition dependence of electrical switching behavior of Ge7Se93−xSbx glasses

Bulk Ge₇Se_93?xSb_x (21 ? x ? 32) glasses are prepared by melt quenching method and electrical switching studies have been undertaken on these samples to elucidate the type of switching and the composition and thickness dependence of switching voltages. On the basis of the compressibility and atomic radii, it has been previously observed that Se-based glasses exhibit memory switching behavior. However, the present results indicate that Ge₇Se_93?xSb_x glasses exhibit threshold type electrical switching with high switching voltages. Further, these samples are found to show fluctuations in the current–voltage (I–V) characteristics. The observed threshold behavior of Ge₇Se_93?xSb_x glasses has been understood on the basis of larger atomic radii and lesser compressibilities of Sb and Ge. Further, the high switching voltages and fluctuations in the I–V characteristics of Ge–Se–Sb samples can be attributed to the high resistance of the samples and the difference in thermal conductivities of different structural units constituting the local structure of these glasses. The switching voltages of Ge₇Se_93?xSb_x glasses have been found to decrease with the increase in the Sb concentration. The observed composition dependence of switching voltages has been understood on the basis of higher metallicity of the Sb additive and also in the light of the Chemically Ordered Network (CON) model. Further, the thickness dependence of switching voltages has been studied to reassert the mechanism of switching.