Supramolecular Self-organization of Potential Hydrogelators on Attracting Surfaces

This article highlights the aggregation behaviour of potential low molecular weight hydrogelators on attracting surfaces. Our goal was the development of a method, which enables the finding of new hydrogelators that are not easily recognizable as such because they only form instable or no hydrogels in aqueous solution. To this end, a series of negatively charges azo-dyes was synthesized and positive charged glass slides were immersed into their aqueous solutions. All dyes showed supramolecular organization and significant concentration on the attracting glass surface. Microscopic investigations mostly revealed the formation of crystals. However, one compound, (1-(2-n-octylphenylazo)-2-hydroxy-6-naphthalenesulphonate, selectively formed a hydrogel on the surface whereas it does not gel in aqueous solution. This reveals the hydrogel as the stable form of this compound under equilibrium conditions. This method of surface-induced hydrogelation might facilitate the identification of new hydrogelators. Further more, it might also allow the mimicking of surface gelation as a process of biological relevance.     

Al2O3/K2O-containing non-stoichiometric lithium disilicate-based glasses

The crystallisation kinetics of experimental glasses in 3 different systems: (A) Li₂O–SiO₂, (B) Li₂O–Al₂O₃–SiO₂ and (C) Li₂O–K₂O–Al₂O₃–SiO₂ were studied under non-isothermal conditions. The DTA results revealed a stronger tendency to crystallisation of binary compositions in comparison to the ternary and quaternary compositions comprising Al₂O₃ and K₂O which present the lower crystallisation, i.e. the crystallisation propensity follows the trend A > B > C. The devitrification process in the Li₂O–SiO₂ and Li₂O–Al₂O₃–SiO₂ systems began earlier and the rate was higher in comparison to that of glasses in the quaternary Li₂O–K₂O–Al₂O₃–SiO₂ system. Thus, addition of Al₂O₃ and K₂O to glasses of Li₂O–SiO₂ system was demonstrated to promote glass stability against crystallisation. However, the activation energy for crystallisation was shown to depend also on the SiO₂/Li₂O ratio with the binary system showing a decreasing trend with increasing SiO₂/Li₂O ratio, while the opposite tendency was being observed for compositions with added Al₂O₃ and K₂O.     

EC–SPE–stripline-NMR analysis of reactive products: a feasibility study

Flow-through electrochemical conversion (EC) of drug-like molecules was hyphenated to miniaturized nuclear magnetic resonance spectroscopy (NMR) via on-line solid-phase extraction (SPE). After EC of the prominent p38α mitogen-activated protein kinase inhibitor BIRB796 into its reactive products, the SPE step provided preconcentration of the EC products and solvent exchange for NMR analysis. The acquisition of NMR spectra of the mass-limited samples was achieved in a stripline probe with a detection volume of 150 nL offering superior mass sensitivity. This hyphenated EC–SPE–stripline-NMR setup enabled the detection of the reactive products using only minute amounts of substrate. Furthermore, the integration of conversion and detection into one flow setup counteracts incorrect assessments caused by the degradation of reactive products. However, apparent interferences of the NMR magnetic field with the EC, leading to a low product yield, so far demanded relatively long signal averaging. A critical assessment of what is and what is not (yet) possible with this approach is presented, for example in terms of structure elucidation and the estimation of concentrations. Additionally, promising routes for further improvement of EC–SPE–stripline-NMR are discussed.     

Low‐Level Laser Therapy Restores the Oxidative Stress Balance in Acute Lung Injury Induced by Gut Ischemia and Reperfusion

It remains unknown if the oxidative stress can be regulated by low‐level laser therapy (LLLT) in lung inflammation induced by intestinal reperfusion (i‐I/R). A study was developed in which rats were irradiated (660 nm, 30 mW, 5.4 J) on the skin over the bronchus and euthanized 2 h after the initial of intestinal reperfusion. Lung edema and bronchoalveolar lavage fluid neutrophils were measured by the Evans blue extravasation and myeloperoxidase (MPO) activity respectively. Lung histology was used for analyzing the injury score. Reactive oxygen species (ROS) was measured by fluorescence. Both expression intercellular adhesion molecule 1 (ICAM‐1) and peroxisome proliferator‐activated receptor‐y (PPARy) were measured by RT‐PCR. The lung immunohistochemical localization of ICAM‐1 was visualized as a brown stain. Both lung HSP70 and glutathione protein were evaluated by ELISA. LLLT reduced neatly the edema, neutrophils influx, MPO activity and ICAM‐1 mRNA expression. LLLT also reduced the ROS formation and oppositely increased GSH concentration in lung from i‐I/R groups. Both HSP70 and PPARy expression also were elevated after laser irradiation. Results indicate that laser effect in attenuating the acute lung inflammation is driven to restore the balance between the pro‐ and antioxidants mediators rising of PPARy expression and consequently the HSP70 production.     

Selenides and diselenides containing oxadiazoles: a new class of functionalised materials

A simple and efficient procedure for the synthesis of a new class of organoselenium liquid crystal compounds was developed. The coupling of aryl bromides with elemental selenium was catalysed using copper oxide nanopowder in the presence of potassium hydroxide employing dimethyl sulfoxide as the solvent. This is the first report of the synthesis and characterisation of liquid crystal-based diselenides. Their mesophases were characterised by polarising optical microscopy and differential scanning calorimetry. Compounds 1, 2 and 4b exhibited the smectic A phase. In addition, these compounds showed weak blue fluorescence in solution (λ_{max. em.} 350–405 nm) and a Stokes shift of around 90 nm.     

The BIOREMA project—part 3: International interlaboratory comparison for bio-ethanol test methods

The main objective of the reference materials for biofuel specifications (BIOREMA) project is the development of two test materials (one bio-ethanol material and one biodiesel material) with well-established reference values. Of a series of three papers, this part describes the material preparation, homogeneity study, stability study, and characterisation of the bio-ethanol material. The test material thus obtained was used in an interlaboratory comparison (ILC) to assess current practices and comparability amongst laboratories providing bio-ethanol testing services. Only 13 participants provided data, resulting in a small dataset for evaluation. Further, it appeared that for a number of laboratories, there was not sufficient material for the determination of all requested parameters. In most cases, as far as the data permit, it can be concluded that the consensus values (based on participant’s results) are in good agreement with the reference or the BIOREMA values (obtained by NMIs participating in the project). For three parameters, namely ethanol content, water content, and density, there is good agreement between the reference and consensus values. For these parameters, the reproducibility standard deviation is close to, or even smaller than, the expanded uncertainty associated with the reference value. A number of parameters show very poor reproducibility, for example, pH_e, electrolytic conductivity, and acidity. The same applies to sodium and copper content, which are very low and therefore challenging parameters to measure accurately. The results of the ILC underpin the need for certified reference materials and demonstrate the requirement for more robust quality control to improve the precision and trueness of the results from testing laboratories.     

Mitigating heat dissipation in Raman lasers using coherent anti-stokes Raman scattering

We present a novel technique that intrinsically mitigates the quantum-defect heating in Raman lasers. The basic principle of this so-called "coherent anti-Stokes Raman scattering (CARS)-based heat mitigation" is to suppress the phonon creation in the Raman medium by increasing the number of out-coupled anti-Stokes photons with respect to the number of out-coupled Stokes photons. We demonstrate with the aid of numerical simulations that for a hydrogen and a silicon Raman laser, CARS-based heat mitigation efficiencies of at least 30% and 35%, respectively, can be obtained.     

Correcting saturation effects of the arterial input function in dynamic susceptibility contrast-enhanced MRI: a Monte Carlo simulation

To prevent systematic errors in quantitative brain perfusion studies using dynamic susceptibility contrast-enhanced magnetic resonance imaging (DSC-MRI), a reliable determination of the arterial input function (AIF) is essential. We propose a novel algorithm for correcting distortions of the AIF caused by saturation of the peak amplitude and discuss its relevance for longitudinal studies. The algorithm is based on the assumption that the AIF can be separated into a reliable part at low contrast agent concentrations and an unreliable part at high concentrations. This unreliable part is reconstructed, applying a theoretical framework based on a transport-diffusion theory and using the bolus-shape in the tissue. A validation of the correction scheme is tested by a Monte Carlo simulation. The input of the simulation was a wide range of perfusion, and the main aim was to compare this input to the determined perfusion parameters. Another input of the simulation was an AIF template derived from in vivo measurements. The distortions of this template was modeled via a Rician distribution for image intensities. As for a real DSC-MRI experiment, the simulation returned the AIF and the tracer concentration-dependent signal in the tissue. The novel correction scheme was tested by deriving perfusion parameters from the simulated data for the corrected and the uncorrected case. For this analysis, a common truncated singular value decomposition approach was applied. We find that the saturation effect caused by Rician-distributed noise leads to an overestimation of regional cerebral blood flow and regional cerebral blood volume, as compared to the input parameter. The aberration can be amplified by a decreasing signal-to-noise ratio (SNR) or an increasing tracer concentration. We also find that the overestimation can be successfully eliminated by the proposed saturation-correction scheme. In summary, the correction scheme will allow DSC-MRI to be expanded towards higher tracer concentrations and lower SNR and will help to increase the measurement to measurement reproducibility for longitudinal studies.     

A practical comparison of MQMAS techniques

A systematic experimental evaluation of several approaches to multiple-quantum MAS NMR was performed for spin-5/2 nuclei using (27)Al NMR of the aluminosilicate andalusite and the porous aluminum phosphate AlPO(4)-14 as model. Experiments were conducted in the fields of 9.4 and 17.6T using magic-angle spinning frequencies up to 30kHz and rf-field strengths of 250 and 120kHz. Numerical SIMPSON optimizations of the NMR parameters were performed alongside the experimental evaluations. Both theory and experiment show that the optimization is most critical for the species in the sample that have the largest quadrupolar coupling constant. For 5QMAS experiments it could be confirmed that the highest available rf-field strength and rotation frequency are favorable for the efficiency of the experiments. For 3QMAS experiments of sites with moderate quadrupolar coupling constants optimum results were obtained at less stringent conditions. The comparison of a FAM II-modification and DFS gave the expected improvement by a factor of about two with respect to a rectangular pulse. No significant difference between these techniques concerning the signal-to-noise ratios was obtained. An actual improvement of the isotropic resolution by a factor of about two was obtained going from 3QMAS to 5QMAS. In addition the resolution of the spectra increases by a factor of about two going from 9.4 to 17.6T.