Upper- and lower-bound Hylleraas–CI calculations for the nonrelativistic Po states of the 4He isotope

Extensive Hylleraas–CI calculations for the lowest P^o states of ⁴He were performed. The dependence of the variational energy values E_κ on the mass parameter κ given by κ=m/m is discussed. Furthermore, lower bounds to E_κ were calculated using variance minimization. © 1998 John Wiley & Sons, Inc. Int J Quant Chem 66 : 25–30, 1998     

trans-Bis(triphenylphosphin)phthalocyaninato(2–)rhenium(II): Synthese,Eigenschaften und Kristallstruktur

trans -Bis(triphenylphosphine)phthalocyaninato(2–)rhenium(II): Synthesis, Properties, and Crystal Structure Dirheniumheptoxide reacts with phthalodinitrile in boiling 1-chloronaphthalene and subsequent reprecipitation of the green raw product from conc. sulfuric acid to yield an oxo-phthalocyaninate of rhenium, which is reduced by molten triphenylphosphine forming dark green trans-bis(triphenylphosphine)phthalocyaninato(2–)rhenium(II), ^trans[Re(PPh₃)₂pc^2–]. The latter crystallizes triclinic in the space group P 1 with the cell parameters as follows: a = 11.512(2) Å, b = 12.795(2) Å, c = 12.858(2) Å, α = 64.42(2)°, β = 79.45(2)°, γ = 72.74(1)°; V = 1628.1(5); Z = 1. Re is in the centre of the (N_p)₄ plane (N_p: N1, N3) and coordinates two triphenylphosphine ligands axially in trans position. The average Re–N_p and Re–P distances are 2.007(1) and 2.516(3) Å, respectively. Despite the many extra bands the typical B, Q and N regions of the pc^2– ligand are observed at ca. 16500, 28900/32900 and 35300 cm^–1. A weak band group at ca. 8900 cm^–1 is attributed to a trip-multiplet transition, another one at ca. 14500 cm^–1 to a P → Re charge transfer. The vibrational spectra are dominated by internal vibrations of the pc^2– ligand. The very weak intensity of the IR bands at 905 and 1327 cm^–1 are diagnostic of the presence of Re^II.     

Ultra‐Small Plutonium Oxide Nanocrystals: An Innovative Material in Plutonium Science

Apart from its technological importance, plutonium (Pu) is also one of the most intriguing elements because of its non‐conventional physical properties and fascinating chemistry. Those fundamental aspects are particularly interesting when dealing with the challenging study of plutonium‐based nanomaterials. Here we show that ultra‐small (3.2±0.9 nm) and highly crystalline plutonium oxide (PuO₂) nanocrystals (NCs) can be synthesized by the thermal decomposition of plutonyl nitrate ([PuO₂(NO₃)₂] ? 3 H₂O) in a highly coordinating organic medium. This is the first example reporting on the preparation of significant quantities (several tens of milligrams) of PuO₂ NCs, in a controllable and reproducible manner. The structure and magnetic properties of PuO₂ NCs have been characterized by a wide variety of techniques (powder X‐ray diffraction (PXRD), X‐ray absorption fine structure (XAFS), X‐ray absorption near edge structure (XANES), TEM, IR, Raman, UV/Vis spectroscopies, and superconducting quantum interference device (SQUID) magnetometry). The current PuO₂ NCs constitute an innovative material for the study of challenging problems as diverse as the transport behavior of plutonium in the environment or size and shape effects on the physics of transuranium elements.     

Salinity Selection for a Low Salinity Water-Low Salinity Surfactant Process

A laboratory selection of salinity for a low salinity water-low salinity surfactant (LS-LSS) process is presented in this paper with systematical investigation on surfactant phase behavior, interfacial tension (IFT), and dynamic retention in porous media with IOS2024 and isoamyl alcohol (IAA) as surfactant system. The results show that 0.4 wt% IOS2024 with 1 wt% IAA can provide ultra-low IFT of 10^?3 mN/m at around 3000–4000 mg/L total dissolved solids, but at that salinity range the surfactant retention is very high. The search for an optimum surfactant formulation has to consider solution properties and retention in addition to the low IFT. The salinity for a LS-LSS process should thus not be focused on either optimal salinity or ultra-low IFT, but instead the best choice could be a compromise between the properties in question. The three-phase region, where ultra-low IFT are found, is also associated with high retention values. However, we show that as salinity is increased from a two-phase region with oil solubilized in a water continuous microemulsion, there is a region close to the three-phase boundary which has potential. This region does not give ultra-low, but fairly low (10^?2 mN/m in this case) interfacial tensions, and also significantly lower retention.      

Similarities and Differences of Low Salinity Polymer and Low Salinity LPS (Linked Polymer Solutions) for Enhanced Oil Recovery

Linked polymer solution (LPS) is nano-size particles made of hydrolyzed polyacrylamide (HPAM) cross-linked with aluminum citrate. The propagation of LPS has been compared to non-cross-linked polymers at low brine salinity condition. The possible differences in properties and potentials for oil recovery have been investigated using water-wet and intermediate-wet cores. The target oil for polymer flooding (PF) is assumed to be the portion of the reservoir that has been bypassed by water during waterflooding and not the residual oil saturation in flooded zones. Our recent studies have shown that a positive synergy can be obtained by combining low salinity and PF. It has been claimed in the literature that cross-linking polymer such as colloidal dispersion gels (colloidal dispersion gels (CDG), micron-size aggregates) or LPS (nano-size particles) would extend the application of polymers to also include change in residual oil saturation. The results of this study indicated higher pressure buildup when low salinity LPS was propagated through brine saturated cores compared to low salinity polymer solution. The pressure buildup was even stronger for high salinity LPS injection. In two phase flow experiments, both polymer and LPS under low salinity condition, showed approximately similar propagation and oil recovery potential when injected into water-wet and intermediate-wet cores.     

Discovery and validation of urinary exposure markers for different plant foods by untargeted metabolomics

While metabolomics is increasingly used to investigate the food metabolome and identify new markers of food exposure, limited attention has been given to the validation of such markers. The main objectives of the present study were to (1) discover potential food exposure markers (PEMs) for a range of plant foods in a study setting with a mixed dietary background and (2) validate PEMs found in a previous meal study. Three-day weighed dietary records and 24-h urine samples were collected three times during a 6-month parallel intervention study from 107 subjects randomized to two distinct dietary patterns. An untargeted UPLC-qTOF-MS metabolomics analysis was performed on the urine samples, and all features detected underwent strict data analyses, including an iterative paired t test and sensitivity and specificity analyses for foods. A total of 22 unique PEMs were identified that covered 7 out of 40 investigated food groups (strawberry, cabbages, beetroot, walnut, citrus, green beans and chocolate). The PEMs reflected foods with a distinct composition rather than foods eaten more frequently or in larger amounts. We found that 23 % of the PEMs found in a previous meal study were also valid in the present intervention study. The study demonstrates that it is possible to discover and validate PEMs for several foods and food classes in an intervention study with a mixed dietary background, despite the large variability in such a dataset. Final validation of PEMs for intake of foods should be performed by quantitative analysis.

Asymmetric Synthesis of Fully Substituted Cyclopentane‐Oxindoles through an Organocatalytic Triple Michael Domino Reaction

An efficient, highly stereoselective asymmetric synthesis of fully functionalized cyclopentanes bearing an oxindole moiety and several other functional groups in one pot has been developed. Key step is an organocatalytic triple Michael domino reaction forming three C?C bonds and six stereocenters, including a quaternary one. Starting from equimolar amounts of simple substrates, a high molecular complexity can be reached after a Wittig olefination in one pot. The new protocol can easily be scaled up to gram amounts.     

Growth of iron cobalt oxides by atomic layer deposition

Thin films of iron cobalt oxides with spinel-type structure are made by the atomic layer deposition (ALD) technique using Fe(thd)3 (Hthd = 2,2,6,6-tetramethylheptane-3,5-dione), Co(thd)2, and ozone as precursors. Pulse parameters for ALD-type growth are established and such growth can be achieved at deposition temperatures between 185 and 310 degrees C. Films have been deposited on amorphous soda-lime glass and single-crystalline substrates of Si(100), MgO(100), and alpha-Al2O3(001) which all provide crystalline films, but with various orientations and crystallite sizes. Application of an external magnetic field during the film growth does not influence film growth characteristics (growth rate, crystallinity, topography etc.). Magnetization data are reported for phase-pure films of spinel-type structure with composition Fe2CoO4.     

A reactivity change of a strontium monohydroxide by umpolung to an acid

Controlled hydrolysis of strontium amide LSrN(SiMe 3) 2(thf) (L = CH(CMe2,6- i-Pr 2C 6H 3N) 2) ( 1) gave an unprecedented example of a hydrocarbon-soluble strontium hydroxide, [LSr(thf)(mu-OH) 2Sr(thf) 2L] ( 2). In compound 2, the tetrahydrofuran (THF) molecules can easily replaced by benzophenone and triphenylphosphine oxide to yield [LSr(mu-OH)(OCPh 2)] 2 ( 3) and [LSr(mu-OH)(OPPh 3)] 2 ( 4) compounds. Among the two strontium atoms of 2, one is coordinated to a single THF molecule, while the other is coordinated to two THF molecules. Interestingly, strontium hydroxide complex 2 behaves as an acid in its reaction with Zr(NMe 2) 4 and results in a heterobimetallic oxide, [LSr(mu-O)Zr(NMe 2) 3] 2 ( 5). Compound 5 is dimeric in the solid state and contains a Sr 2Zr 2O 2 core.