The extraction of HCl by TDPO in benzene

The results of the extraction of HCl by TDPO in benzene and the co-extraction of water are discussed. From the infrared spectra of normal (HCl-H₂O) and deuterated (DCl-D₂O) systems it may be concluded that TDPO·HCl·H₂O is formed in the organic phase on extraction from aqueous solutions with c_HCl≤5M, and TDPO·HCl with c_HCl>5M. Compounds such as TDPO·2HCl are found in the organic phase if there is an excess of HCl in the organic phase. From cryoscopic and viscosity measurements of the organic phase, conclusions can be made about the presence of polymeric compounds in this phase.     

On-line sorbent extraction, preconcentration and determination of lead by atomic absorption spectrometry

A method for the quantitative preconcentration of lead based on an existing batch process was developed for implementation in a flow system including a flame AAS detector. Lead can be quantitatively preconcentrated as pyrrolidinedithiocarbamate or dithizonate on an activated carbon minicolumn. The chelates are eluted in methyl isobutyl ketone and introduced directly into the nebuliser-burner. An enrichment factor of 50 is typically obtained for a preconcentration time of 2 min (lead can be determined at concentrations between 15 and 400 ng/ml), which results in a throughput of ca. 25 samples per hr. The sensitivity achieved with the two reagents is similar, but the selectivity provided by APDC exceeds that of dithizone. Based on the results obtained in the determination of lead in reference materials (minerals and skim milk), the proposed APDC method is applicable to real samples.     

Solubility product relations in the rare earth hydrous hydroxides

The solubility products for some rare earth hydroxides and their temperature dependence have been shown. Greater solubility is shown for larger atomic radii and for lower temperature.     

Electroviscous Effect in Dilute Suspensions of Alumina

A study on the electroviscous effect of alumina suspensions has been made. At the low volume fraction of the particles studied here only a first-order effect was detected. Ubbelohde-type capillary viscometers have been used. A simple method to determine the hydrodynamic constant k(1) has been proposed. The experimental primary electroviscous coefficients corresponding to different electrolyte concentrations have been compared with two different theoretical approachs (I. G. Watterson, and L. R. White, J. Chem. Soc. Faraday Trans. 2 77, 1115 (1981); F. J. Rubio-Hernández, E. Ruiz-Reina, and A. I. Gómez-Merino, J. Colloid Interface Sci. 206, 334 (1998)) and the results suggest that the presence of a dynamic Stern layer plays a certain role in this effect. Copyright 2000 Academic Press.     

Synchronization of signal sampling with liquid pulsation in systems with peristaltic pumps

Method and electronic circuitry are described for synchronization of analytical signal sampling with pulsation of liquid flow in systems with a peristaltic pump. The technique is illustrated for cathodic stripping voltammetry of manganese.     

Flow injection analysis for calcium in serum,water and waste waters by spectrophotometry and by ion-selective electrode

The Flow Injection technique is shown to provide fast, reliable and sensitive methods for the determination of calcium in various aqueous as well as serum samples; spectrophotometric or potentiometric detection can be used. At sampling rates of 100–110 samples per hour, with 30-μl sample injections, high reproducibility of measurement and low reagent consumption are achieved in both methods. In the spectrophotometric method, the analytical readout is available within 12 s after sample injection at a total reagent consumption of 0.75 ml per analysis. The potentiometric measurement of the calcium activity in serum is placed on a reliable basis by alternating measurements of serum samples and aqueous standards without incurring any non-reproducible changes in potential between aqueous and serum solutions. This permits the simultaneous determination of pH and pCa, the analytical readout being available within XXX s of sample injection. The good agreement between the results obtained with the Flow Injection method and those attained by atomic absorption and EDTA titrations as well as pCa stat-measurements show that the new methods are potentially suitable for routine analysis.     

Hybridization in some macrocyclic polyacetylenes

The hybridization in several cyclic polyacetylene compounds has been calculated by the maximum overlap method, assuming planar and non-planar geometries of the molecules. In the planar configuration the hybrids describing the molecular skeleton deviate from the corresponding bond directions. We have a few “bent” bonds, but in contrast to the situation in small rings, here the deviation angles are negative, i.e., the hybrids point toward the inside of the ring. Non-planar structures in which acetylene groups are kept in a plane and CCH₂ or CH₂ groups are displaced out of the plane show less deviation from the bond directions of bent bonds. Furthermore, the deviation angles decrease with an increase in the out-of-plane displacement of methylene groups. Finally, when the angle of bending of the molecules approaches 50°, the deviation vanishes, predicting a puckered conformation for the molecules. Correlation between CC stretching vibration frequencies and the corresponding CC bond overlap is discussed.     

Maßanalytische Bestimmung von Merkapto-Benzthiazol im Wärmeaustauscher eines Reaktors

Zusammenfassung Eine volumetrische Methode zur Bestimmung geringer Mengen Merkapto-Benzthiazol in der Kühlflüssigkeit von Reaktoren wurde ausgearbeitet. Es wird in ammoniakalischem Medium mit ammoniakalisehem Silbernitrat titriert. Das Merkapto-Benzthiazol bildet mit Silberionen einen weißen, flockigen Niederschlag. Der Endpunkt der Titration wird mit Hilfe der Dead-stop-Indikation bestimmt. Er wird durch eine sprunghafte Stromstärkeerhöhung (Pt-Pt-Elektrode, 500 mV und 10^–7 A Empfindlichkeit des Galvanometers) angezeigt. Die Methode wird durch Triäthanolamin, Glykol, geringe Mengen von Chlorid und Phosphat nicht gestört.

---

Summary A volumetric method has been developed for determining slight amounts of mercapto-benzthiazol in the cooling liquid of reactors. It is titrated in ammoniacal medium with ammoniacal silver nitrate. The mercapto-benzthiazol yields a colorless flocculent precipitate with silver ions. The endpoint of the titration is found by the dead stop indication. It is signalled by a sudden jump in the current strength (Pt-Pt-electrode, 500 mV and 10^–7 amp sensitivity of the galvanometer). The method is not impaired by triethanolamine, glycol, slight amounts of chloride, nor by phosphate.

---

Résumé On a mis au point une méthode volumétrique pour le dosage de faibles quantités de mercaptobenzothiazole dans le liquide de refroidissement des réacteurs. On titre en milieu ammoniacal par le nitrate d'argent ammoniacal. Le mercaptobenzothiazole forme un précipité blanc, floconneux avec les ions argent. On détermine le point d'équivalence du titrage par la méthode du «dead stop end point». Il se trouve signalé par une augmentation brusque de l'intensité (électrodes Pt-Pt, 500 mv et 10^–7 A de sensibilité du galvanomètre). La triéthanolamine, le glycol, de petites quantités de chlorures et de phosphates, ne gênent pas.

---

---

Vorgetragen beim Symposium für analytische Chemie in Graz, 29. September bis 1. Oktober 1965.     

Papierchromatographische Trennung und Identifizierung der Polyäthylenglykole und ihrer Monoäther

Zusammenfassung Es wurde eine chromatographische Methode zur Auftrennung und Identifizierung der Polyäthylenglykole und ihrer Monoäther nach Über-führung in die Ester der 3,5-Dinitrobenzoesäure ausgearbeitet. Es wurden entweder Lösungsmittelsysteme mit Dimethylformamid oder Formamid als stationäre und Hexan, Cyklohexan, Benzol, Chloroform und ihre Gemische als mobile Phase oder mit Paraffinöl imprägnierte Papiere und das Gemisch Dimethylformamid—Methylalkohol—Wasser als mobile Phase angewendet.

---

Summary A Chromatographic method has been developed for the separation and identification of the polyethylene glycols and their mono-ethers after conversion into the esters of 3,5-dinitrobenzoic acid. The solvent systems employed consisted of dimethylformamide or formamide as stationary phase and hexane, cyclohexane, benzene, chloroform and their mixtures as mobile phase, or papers impregnated with paraffin oil and the mixture of dimethyl-formamide-methyl alcohol were used as the mobile phase.

---

Résumé On a élaboré une méthode chromatographique de séparation et d'identification des polyéthylèneglycols et de leurs monoéthers après leur transformation en ester de l'acide dinitro-3,5 benzoïque. On a employé soit les systèmes de solvants avec le diméthylformamide ou le formamide comme phase stationnaire, et l'hexane, le cyclohexane, le benzène, le chloroforme et leurs mélanges comme phase mobile, ou des papiers imprégnés d'huile de paraffine et le mélange diméthylformamide-alcool méthylique-eau comme phase mobile.

---

---

Herrn Dipl.-Ing.J. Kami aus unserem Institut danken wir für die Darstellung und Reinigung einiger angewandter Verbindungen.     

HPLC-Electrochemical detection with graphite-poly (tetrafluoroethylene) electrode Determination of the fungicides thiram and disulfiram

The suitability of composite graphite-poly(tetrafluoroethylene) (Teflon) electrodes as amperometric indicator electrodes in HPLC detection is demonstrated. The determination of the fungicides thiram and disulfiram in the presence of ziram has been chosen as an analytical problem. The optimization of working conditions, such as the choice of the organic solvent used in the mobile phase as well as its percentage, the potential applied to the composite electrode, and the time elapsed between mixing the carbamates and the injection, has been accomplished by using the wall-jet flow-cell configuration. The effect of the acetonitrile percentage used in the mobile phase on the retention of thiram, disulfiram, ziram and phenol was evaluated. Resolution up to the baseline can be achieved with 45% acetonitrile. The sensitivity of the determination of thiram and disulfiram in the presence of a constant concentration of ziram is slightly better when using a wall-jet cell; however, the background current is higher, as well as the baseline noise and the time necessary to achieve stabilization of the baseline before the injection. Lower limits of detection for both fungicides, as well as a better repeatability, were obtained when using a thin-layer flow cell configuration. As an application, the determination of thiram in spiked apple samples, at a level of 0.5 mg thiram kg(-1) apple, has been carried out with a mean recovery of 97 +/- 3% for a significance level of 0.05.