Catalytic Enantioselective β-Alkylation of α,β-Unsaturated Aldehydes by Combination of Transition-Metal- and Aminocatalysis: Total Synthesis of Bisabolane Sesquiterpenes

Branching out! The first co-catalytic enantioselective (up to 98:2 e.r.) β-alkylation of α,β-unsaturated aldehydes by combination of simple chiral amine and copper catalysts provides β-branched aldehydes in a one-pot protocol. The methodology was applied to the short total syntheses of bisabolane sesquiterpenes (S)-(+)-curcumene, (E)-(S)-(+)-3-dehydrocurcumene and (S)-(+)-tumerone.     

Catalytic asymmetric aziridination of α,β-unsaturated aldehydes

The development, scope, and application of the highly enantioselective organocatalytic aziridination of α,β-unsaturated aldehydes is presented. The aminocatalytic azirdination of α,β-unsaturated aldehydes enables the asymmetric formation of β-formyl aziridines with up to >19:1 d.r. and 99% ee. The aminocatalytic aziridination of α-monosubstituted enals gives access to terminal α-substituted-α-formyl aziridines in high yields and up to 99% ee. In the case of the organocatalytic aziridination of disubstituted α,β-unsaturated aldehydes, the transformations were highly diastereo- and enantioselective and give nearly enantiomerically pure β-formyl-functionalized aziridine products (99% ee). A highly enantioselective one-pot cascade sequence based on the combination of asymmetric amine and N-heterocyclic carbene catalysis (AHCC) is also disclosed. This one-pot three-component co-catalytic transformation between α,β-unsaturated aldehydes, hydroxylamine derivatives, and alcohols gives the corresponding N-tert-butoxycarbonyl and N-carbobenzyloxy-protected β-amino acid esters with ee values ranging from 92-99%. The mechanisms and stereochemistry of all these catalytic transformations are also discussed.     

Challenge of large-scale motion for residual dipolar coupling based analysis of configuration: the case of fibrosterol sulfate A

Fibrosterol sulfate A is a polysulfated bis-steroid with an atypical side chain. Due to the flexibility of the linker, large-scale motions that change dramatically the shape of the entire molecule are expected. Such motions pose major challenges to the structure elucidation and the correct determination of configuration. In this study, we will describe the determination of the relative configuration of fibrosterol sulfate A through a residual dipolar coupling based multiple alignment tensor analysis complemented by molecular dynamics. For completeness, we applied also the single tensor approach which is unreliable due to the large-scale motions and compare the results.     

Trends in properties of para‐substituted 3‐(phenylhydrazo)pentane‐2,4‐diones

Trends between the Hammett's σ_p and related normal , inductive σ_I, resonance σ_R, negative and positive polar conjugation and Taft's σ_p° substituent constants and the distance, δ_{N? H} NMR chemical shift, oxidation potential (E_p/2°x, measured in this study by cyclic voltammetry (CV)) and thermodynamic parameters (pK, ΔG⁰, ΔH⁰ and ΔS⁰) of the dissociation process of unsubstituted 3‐(phenylhydrazo)pentane‐2,4‐dione (HL₁) and its para‐substituted chloro (HL₂), carboxy (HL₃), fluoro (HL₄) and nitro (HL₅) derivatives were recognized. The best fits were found for σ_p and/or in the cases of , δ_{N? H} and E_p/2°x, showing the importance of resonance and conjugation effects in such properties, whereas for the above thermodynamic properties the inductive effects (σ_I) are dominant. HL₂ exists in the hydrazo form in DMSO solution and in the solid state and contains an intramolecular H‐bond with the distance of 2.588(3) Å. It was also established that the dissociation process of HL_1–5 is non‐spontaneous, endothermic and entropically unfavourable, and that the increase in the inductive effect (σ_I) of para‐substitutents (? H < ? Cl < ? COOH < ? F < ? NO₂) leads to the corresponding growth of the distance and decrease of the pK and of the changes of Gibbs free energy, of enthalpy and of entropy for the HL_1–5 acid dissociation process. The electrochemical behaviour of HL_1–5 was interpreted using theoretical calculations at the DFT/HF hybrid level, namely in terms of HOMO and LUMO compositions, and of reactivities induced by anodic and cathodic electron‐transfers. Copyright © 2010 John Wiley & Sons, Ltd.     

Preparation and Characterization of Biobased Lignin-Co-Polyester/Amide Thermoplastics

More than 23 million tonnes of lignin are produced annually in the US from wood pulping and 98% of this lignin is burnt. Therefore, creating products from lignin, such as plastics, offers an approach for obtaining sustainable materials in a circular economy. Lignin-based copolymers were synthesized using a single pot, solvent free, melt condensation reaction. The synthesis occurred in two stages. In the first stage, a biobased prepolymer consisting of butanediol (BD, 0.8–1 molar content) and a diacid (succinic (SA), adipic (AA) and suberic acids (SuA), with varying amounts of diaminobutane (DAB, 0–0.2 molar content) was heated under vacuum and monitored by Fourier transform infra-red (FTIR) spectroscopy and electrospray ionization-mass spectrometry (ESI-MS). In the second stage, prepolymer was mixed with a softwood kraft lignin (0–50 wt.%) and further reacted under vacuum at elevated temperature. Progression of the polymerization reaction was monitored using FTIR spectroscopy. The lignin-copolyester/amide properties were characterized using tensile testing, X-ray diffraction (XRD), dynamic mechanical analysis (DMA), differential scanning calorimetry (DSC) and thermogravimetric analysis (TGA) techniques. Lignin co-polymer tensile (strength 0.1–2.1 MPa and modulus 2 to 338 MPa) properties were found to be influenced by the diacid chain length, lignin, and DAB contents. The lignin-copolymers were shown to be semi-crystalline polymer and have thermoplastic behavior. The SA based copolyesters/amides were relatively stiff and brittle materials while the AA based copolyesters/amides were flexible and the SuA based copolyesters/amides fell in-between. Additionally, > 30 wt.% lignin the lignin- copolyesters/amides did not exhibit melt behavior. Lignin-co-polyester/amides can be generated using green synthesis methods from biobased building blocks. The lignin- copolyesters/amides properties could be tuned based on the lignin content, DAB content and diacid chain length. This approach shows that undervalued lignin can be used in as a macromonomer in producing thermoplastic materials.     

Fluorescent Probes Based on Nucleophilic Substitution–Cyclization for Hydrogen Sulfide Detection and Bioimaging

The design, synthesis, properties, and cell imaging applications of a series of 2‐pyridyl disulfide based fluorescent probes (WSP1, WSP2, WSP3, WSP4 and WSP5) for hydrogen sulfide detection are reported. The strategy is based on the dual‐nucleophilicity of hydrogen sulfide. A hydrogen sulfide mediated tandem nucleophilic substitution‐cyclization reaction is used to release the fluorophores and turn on the fluorescence. The probes showed high sensitivity and selectivity for hydrogen sulfide over other reactive sulfur species, including cysteine and glutathione.     

Self-assembled 3D heterometallic Cu(II)/Fe(II) coordination polymers with octahedral net skeletons: structural features, molecular magnetism, thermal and oxidation catalytic properties

The new three-dimensional (3D) heterometallic Cu(II)/Fe(II) coordination polymers [Cu(6)(H(2)tea)(6)Fe(CN)(6)](n)(NO(3))(2n)·6nH(2)O (1) and [Cu(6)(Hmdea)(6)Fe(CN)(6)](n)(NO(3))(2n)·7nH(2)O (2) have been easily generated by aqueous-medium self-assembly reactions of copper(II) nitrate with triethanolamine or N-methyldiethanolamine (H(3)tea or H(2)mdea, respectively), in the presence of potassium ferricyanide and sodium hydroxide. They have been isolated as air-stable crystalline solids and fully characterized including by single-crystal X-ray diffraction analyses. The latter reveal the formation of 3D metal-organic frameworks that are constructed from the [Cu(2)(μ-H(2)tea)(2)](2+) or [Cu(2)(μ-Hmdea)(2)](2+) nodes and the octahedral [Fe(CN)(6)](4-) linkers, featuring regular (1) or distorted (2) octahedral net skeletons. Upon dehydration, both compounds show reversible escape and binding processes toward water or methanol molecules. Magnetic susceptibility measurements of 1 and 2 reveal strong antiferromagnetic [J = -199(1) cm(-1)] or strong ferromagnetic [J = +153(1) cm(-1)] couplings between the copper(II) ions through the μ-O-alkoxo atoms in 1 or 2, respectively. The differences in magnetic behavior are explained in terms of the dependence of the magnetic coupling constant on the Cu-O-Cu bridging angle. Compounds 1 and 2 also act as efficient catalyst precursors for the mild oxidation of cyclohexane by aqueous hydrogen peroxide to cyclohexanol and cyclohexanone (homogeneous catalytic system), leading to maximum total yields (based on cyclohexane) and turnover numbers (TONs) up to about 22% and 470, respectively.     

Dissociative electron transfer to organic chlorides: electrocatalysis at metal cathodes

The reductive cleavage of a series of organic chlorides, including chloroaromatics, benzyl chlorides, activated chloroalkanes and polychloromethanes, was investigated at Ag, Cu, Pd and glassy carbon (GC) electrodes in CH(3)CN + 0.1 M (C(2)H(5))(4)NClO(4). The silver cathode was either a 2-mm diameter disc, fabricated from Ag wire, or nanoclusters of average diameter d = 304 nm, prepared by electrodeposition on GC. Ag, Cu and Pd electrodes have shown remarkable electrocatalytic properties for the reduction of several compounds. The peak potentials recorded at these electrodes, for example, at upsilon = 0.1 V s(-1) are positively shifted by 0.3-0.8 V with respect to the reduction potentials measured at a non catalytic electrode such as GC. Electrocatalysis is strictly related to the concerted nature of the dissociative electron transfer to the carbon-chlorine bond. No catalysis is observed when the dissociative electron transfer to RCl occurs according to a stepwise mechanism involving the intermediate formation of a radical anion. The catalytic surfaces affect the reaction scheme, offering a more favourable route possibly through the formation of strongly adsorbed activated complexes.     

One-pot asymmetric synthesis of beta-cyanohydroxymethyl alpha-amino acid derivatives: formation of three contiguous stereogenic centers

[reaction: see text] One-pot asymmetric Mannich-hydrocyanation reactions are described. Reaction of unmodified aldehydes with N-PMP-protected alpha-imino ethyl glyoxylate in the presence of catalytic amounts of L-proline followed by the addition of Et(2)AlCN provided highly enantiomerically pure beta-cyanohydroxymethyl alpha-amino acid derivatives possessing three contiguous stereogenic centers as single diastereomers (93-99% ee). Control of reaction temperature during the cyanation step directed whether cyclization of the products to lactones occurred.