Development of a sequential injection system for trace mercury determination by cold vapour atomic absorption spectrometry utilizing an integrated gas-liquid separator/reactor

A simple and robust time-based on-line sequential injection system for trace mercury determination via cold vapour atomic absorption spectrometry (CVAAS), employing a new integrated gas-liquid separator (GLS), which in parallel operates as reactor, was developed. Sample and reductant are sequentially loaded into the GLS while an argon flow delivers the released mercury vapour through the atomic absorption cell. The proposed method is characterized by the ability of successfully managing variable sample volume up to 30 ml in order to achieve high sensitivity. For 20 ml sample volume, the sampling frequency is 25 h⁻¹. The calibration curve is linear over the concentration range 0.05-5.0 μg l⁻¹ of Hg(II), the detection limit is c_L = 0.02 μg l⁻¹, and the relative standard deviation is s_r = 2.6% at 1.0 μg l⁻¹ Hg(II) level. The performance of the proposed method was evaluated by analyzing certified reference material and applied to the analysis of natural waters and biological samples.     

Investigation of four digestion procedures for multi-element determination of toxic and nutrient elements in legumes by inductively coupled plasma-optical emission spectrometry

A simple and reliable multi-element procedure for determination of essential (Cr, Cu, Fe, Mg, Mn, Zn) and toxic (Al, Cd, Pb) elements in legumes by inductively coupled plasma-optical emission spectrometry (ICP-OES) was developed. In this contribution, four different digestion procedures were thoroughly investigated and accurately evaluated with respect to their affect on the analysis of legumes. These included wet digestion with HNO₃/H₂SO₄ and HNO₃/H₂SO₄/H₂O₂, and dry ashing with Mg(NO₃)₂ and Mg(NO₃)₂/HNO₃. Two calibrations (aqueous standard and standard addition) procedures were studied, and proved that standard addition was preferable for all analytes. ICP-OES operating parameters, such as radio-frequency (RF) incident power, sample uptake flow rate and nebulizer argon gas flow rate were optimized. The precision as repeatability, expressed as relative standard deviation (R.S.D.) for aqueous standard containing 250 μg l⁻¹ of each analyte was in the range1.5-8.0%. The accuracy, expressed as relative error was generally varied in the range of 0.5-10% for all analytes, while the quantification limits were lower than 2.5 μg g⁻¹. Although, acceptable results were obtained from all developed procedures, wet digestion method with HNO₃/H₂SO₄/H₂O₂ is recommended for better recovery. The good agreement between measured and certified concentrations with respect to IAEA-331 and IAEA-359 (CRM's supplied by IAEA, International Atomic Energy Agency) indicates that the developed analytical method is well suited for determination of toxic and nutrient elements in legumes and possibly similar matrices.     

Use of fractional factorial design for optimization of digestion procedures followed by multi-element determination of essential and non-essential elements in nuts using ICP-OES technique

Two digestion procedures have been tested on nut samples for application in the determination of essential (Cr, Cu, Fe, Mg, Mn, Zn) and non-essential (Al, Ba, Cd, Pb) elements by inductively coupled plasma-optical emission spectrometry (ICP-OES). These included wet digestions with HNO₃/H₂SO₄ and HNO₃/H₂SO₄/H₂O₂. The later one is recommended for better analytes recoveries (relative error < 11%). Two calibrations (aqueous standard and standard addition) procedures were studied and proved that standard addition was preferable for all analytes. Experimental designs for seven factors (HNO₃, H₂SO₄ and H₂O₂ volumes, digestion time, pre-digestion time, temperature of the hot plate and sample weight) were used for optimization of sample digestion procedures. For this purpose Plackett-Burman fractional factorial design, which involve eight experiments was adopted. The factors HNO₃ and H₂O₂ volume, and the digestion time were found to be the most important parameters. The instrumental conditions were also optimized (using peanut matrix rather than aqueous standard solutions) considering radio-frequency (rf) incident power, nebulizer argon gas flow rate and sample uptake flow rate. The analytical performance, such as limits of detection (LOD < 0.74 μg g⁻¹), precision of the overall procedures (relative standard deviation between 2.0 and 8.2%) and accuracy (relative errors between 0.4 and 11%) were assessed statistically to evaluate the developed analytical procedures. The good agreement between measured and certified values for all analytes (relative error <11%) with respect to IAEA-331 (spinach leaves) and IAEA-359 (cabbage) indicates that the developed analytical method is well suited for further studies on the fate of major elements in nuts and possibly similar matrices.     

A novel dinuclear species in the aqueous distribution of aluminum in the presence of citrate

The chemistry of aluminum was explored in the presence of the physiological ligand citric acid and in low-pH aqueous media. As a result, the first dinuclear aluminum-citrate complex (NH4)4[Al2-(C6H4O7)(C6H5O7)2].4H2O was isolated at low pH (approximately 3.5), and was characterized by FT-IR spectroscopy and X-ray crystallography. The structural analysis reveals the presence of a dinuclear assembly of two aluminum ions octahedrally coordinated to three citrate ligands of differing protonation state. The NMR solution behavior of this complex emphasizes its time-dependent transformation into a number of variable nature species, ultimately leading to the thermodynamically stable trinuclear species. It also establishes the participation of the dinuclear complex as a viable component of the aqueous Al(III)-citrate speciation. The chemical and structural features of this novel low molecular mass species provide considerable insight into citrate's ability, as a natural ligand, to influence the chemistry of aluminum in a pH-dependent fashion, and potentially affect aluminum's (bio)distribution, absorption, accumulation, and biotoxicity at sensitive biological sites.     

A Novel Glass Fiber Coated with Sol–Gel Poly-Diphenylsiloxane Sorbent for the On-Line Determination of Toxic Metals Using Flow Injection Column Preconcentration Platform Coupled with Flame Atomic Absorption Spectrometry

A novel simple and sensitive, time-based flow injection solid phase extraction system was developed for the automated determination of metals at low concentration. The potential of the proposed scheme, coupled with flame atomic absorption spectrometry (FAAS), was demonstrated for trace lead and chromium(VI) determination in environmental water samples. The method, which was based on a new sorptive extraction system, consisted of a microcolumn packed with glass fiber coated with sol–gel poly (diphenylsiloxane) (sol–gel PDPS), which is presented here for the first time. The analytical procedure involves the on-line chelate complex formation of target species with ammonium pyrrolidine dithiocarbamate (APDC), retention onto the hydrophobic sol–gel sorbent coated surface of glass fibers, and finally elution with methyl isobutyl ketone prior to atomization. All main chemical and hydrodynamic factors, which affect the complex formation, retention, and elution of the metal, were optimized thoroughly. Furthermore, the tolerance to potential interfering ions appearing in environmental samples was also explored. Enhancement factors of 215 and 70, detection limits (3 s) of 1.1 μg·L⁻¹ and 1.2 μg·L⁻¹, and relative standard deviations (RSD) of 3.0% (at 20.0 μg·L⁻¹) and 3.2% (at 20.0 μg·L⁻¹) were obtained for lead and chromium(VI), respec tively, for 120 s preconcentration time. The trueness of the developed method was estimated by analyzing certified reference materials and spiked environmental water samples.     

Facile preparation of highly monodisperse small silica spheres (15 to >200 nm) suitable for colloidal templating and formation of ordered arrays

Highly monodisperse spherical silica nanoparticles with diameters ranging from ca. 15 to 200 nm were prepared using an environmentally friendly water-based synthesis. The size of the spheres can be precisely controlled by using a facile regrowth procedure in the same reaction media. Furthermore, these monodisperse silica spheres can be successfully used as seeds in the well-established St?ber silica preparation. The regrowth approach allows for easy incorporation of functional additives. High monodispersity and charge stabilization renders these nanoparticles highly suitable for close-packed array formation and colloidal templating.     

Optimization and comparison of two digestion methods for multi-element analysis of certified reference plant materials by ICP-AES. Application of Plackett-Burman and central composite designs

Two open-vessel wet digestion methods using mixtures of (i) HNO₃ and H₂SO₄ (WD I), and (ii) HNO₃, H₂SO₄ and H₂O₂ (WD II) were developed and optimized for determination of a wide range of elements in plant reference materials by inductively coupled plasma atomic emission spectrometry. A Plackett-Burman fractional factorial experimental design with eight experiments for seven variables was used for the evaluation of the effects of several digestion variables at once. From these studies, certain variables showed up as significant, and they were further optimized by using a star-type central composite experimental design, which involved fourteen experiments. Instrumental variables such as radio-frequency incident power, nebulizer argon gas flow rate and sample uptake flow rate were also optimized. The analytical performance was assessed statistically. Nine elements in total can be simultaneously determined at the concentration levels usually found in plant materials. The agreement between measured and certified values with respect to NIST-SRM 1568a (rice flour), IAEA-331 (spinach leaves) and IAEA-359 (cabbage) proved that the developed methods are well suited for routine elemental analysis of plants or foods of plant origin. Correspondence: George A. Zachariadis, Laboratory of Analytical Chemistry, Department of Chemistry, Aristotle University, GR-54124 Thessaloniki, Greece     

Oxidative Amide Coupling from Functionally Diverse Alcohols and Amines Using Aerobic Copper/Nitroxyl Catalysis

The aerobic Cu/ABNO catalyzed oxidative coupling of alcohols and amines is highlighted in the synthesis of amide bonds in diverse drug‐like molecules (ABNO=9‐azabicyclo[3.3.1]nonane N‐oxyl). The robust method leverages the privileged reactivity of alcohols bearing electronegative hetero‐ atoms (O, F, N, Cl) in the β‐position. The reaction tolerates over 20 unique functional groups and is demonstrated on a 15 mmol scale under air. Steric constraints of the catalyst allow for chemoselective amidation of primary amines in the presence of secondary amines. All catalyst components are commercially available, and the reaction proceeds under mild conditions with retention of stereocenters in both reaction partners, while producing only water as a by‐product.