Crystal structures and biological activity of 1,1,4‐triphenyl‐substituted 1,3‐enyne compounds

1,3‐Enyne structural motifs are versatile building blocks in organic synthesis and occur widely in various natural products with many of them being highly active as cytotoxic macrolides and antitumour antibiotics. This article presents the crystal structure of three 1,1,4‐triphenyl‐substituted 1,3‐enynes, viz. 4‐(2‐methylphenyl)‐1,1‐diphenylbut‐1‐en‐3‐yne, C₂₃H₁₈ ( 1 ), 4‐(2‐methoxyphenyl)‐1,1‐diphenylbut‐1‐en‐3‐yne, C₂₃H₁₈O ( 2 ), and 4‐(4‐nitrophenyl)‐1,1‐diphenylbut‐1‐en‐3‐yne, C₂₂H₁₅NO₂ ( 3 ). The benzene ring at position 4 of the but‐1‐en‐3‐yne group bears a weakly activating methyl group in compound 1 , a moderately activating methoxy group in 2 and a strongly deactivating nitro group in 3 . The crystal structures of 1 and 3 both have monoclinic symmetry, while that of 2 is orthorhombic, and all of them have one molecule in the asymmetric unit. All three compounds were investigated for their antibacterial and antifungal activities. Interestingly, enyne 2 is the only compound tested that inhibited the growth of Aspergillus niger.     

Two interacting particles in a disordered chain III: Dynamical aspects of the interplay disorder-interaction

The interplay between the quantum interferences responsible for one particle localization over a length L₁, and the partial dephasing induced by a local interaction of strength U with another particle leading to partial delocalization over a length L ₂ > L ₁ , is illustrated by a study of the motion of two particles put close to each other at the initial time. Localization is reached in two steps. First, before the time t₁ necessary to propagate over L₁, the interaction slows down the ballistic motion. On the contrary, after t₁ the interaction favors a very slow delocalization, characterized by a spreading of the center of mass, until L₂ is reached. This slow motion is related to the absence of quantum chaos in this one dimensional model, the interaction being only able to induce weaker chaos with critical spectral statistics. Under appropriate initial conditions, the motion remains invariant under the duality transformation mapping the behavior at small U onto the behavior at large U. Received 24 August 1998     

Simultaneous spectrophotometric determination of diuretics by using multivariate calibration methods

The wavelength range and number of factors used in partial least-squares (PLS) calibration for the resolution of the dihydralazine (DHZ)-hydrochlorothiazide (HCT) binary mixture and the dihydralazine-hydrochlorothiazide-reserpine ternary mixture were optimized in terms of the relative standard error (R.S.E.) and relative mean standard error (R.M.S.E.). Under the optimum conditions thus established, synthetic mixtures of the analytes can be resolved with errors and relative standard deviations (R.S.D) less than 4.5 and 1.0%, respectively. The ensuing method, which was validated by comparison with high performance liquid chromatography (HPLC), also gives good results with real samples (pharmaceutical preparations).     

Surface modification of activated carbons for CO2 capture

The reduction of anthropogenic CO₂ emissions to address the consequences of climate change is a matter of concern for all developed countries. In the short term, one of the most viable options for reducing carbon emissions is to capture and store CO₂ at large stationary sources. Adsorption with solid sorbents is one of the most promising options. In this work, two series of materials were prepared from two commercial activated carbons, C and R, by heat treatment with gaseous ammonia at temperatures in the 200-800 °C range. The aim was to improve the selectivity and capacity of the sorbents to capture CO₂, by introducing basic nitrogen-functionalities into the carbons. The sorbents were characterised in terms of texture and chemical composition. Their surface chemistry was studied through temperature-programmed desorption tests and X-ray photoelectron spectroscopy. The capture performance of the carbons was evaluated by using a thermogravimetric analyser to record mass uptakes by the samples when exposed to a CO₂ atmosphere.     

Is the Antidepressant Activity of Selective Serotonin Reuptake Inhibitors Mediated by Nicotinic Acetylcholine Receptors?

It is generally assumed that selective serotonin reuptake inhibitors (SSRIs) induce antidepressant activity by inhibiting serotonin (5-HT) reuptake transporters, thus elevating synaptic 5-HT levels and, finally, ameliorates depression symptoms. New evidence indicates that SSRIs may also modulate other neurotransmitter systems by inhibiting neuronal nicotinic acetylcholine receptors (nAChRs), which are recognized as important in mood regulation. There is a clear and strong association between major depression and smoking, where depressed patients smoke twice as much as the normal population. However, SSRIs are not efficient for smoking cessation therapy. In patients with major depressive disorder, there is a lower availability of functional nAChRs, although their amount is not altered, which is possibly caused by higher endogenous ACh levels, which consequently induce nAChR desensitization. Other neurotransmitter systems have also emerged as possible targets for SSRIs. Studies on dorsal raphe nucleus serotoninergic neurons support the concept that SSRI-induced nAChR inhibition decreases the glutamatergic hyperstimulation observed in stress conditions, which compensates the excessive 5-HT overflow in these neurons and, consequently, ameliorates depression symptoms. At the molecular level, SSRIs inhibit different nAChR subtypes by noncompetitive mechanisms, including ion channel blockade and induction of receptor desensitization, whereas α9α10 nAChRs, which are peripherally expressed and not directly involved in depression, are inhibited by competitive mechanisms. According to the functional and structural results, SSRIs bind within the nAChR ion channel at high-affinity sites that are spread out between serine and valine rings. In conclusion, SSRI-induced inhibition of a variety of nAChRs expressed in different neurotransmitter systems widens the complexity by which these antidepressants may act clinically.     

Precolumn derivatization of reducing carbohydrates with 4-(3-Methyl-5-oxo-2-pyrazolin-1-yl) benzoic acid. Study of reaction, high-performance liquid chromatographic separation and quantitative performance of method

Summary A simple method for quantitative determination of carbohydrates by reversed-phase, high-performance liquid chromatography after pre-column derivatization and UV detection has been developed. Reducing sugars are condensed with 4-(3-methyl-5-oxo-2-pyrazolin-l-yl) benzoic acid (PMPA) to yield UV adducts absorbing at 271 nm, which are resolved under typical reversed-phase conditions. After derivatization, excess PMPA is easily removed from the reaction mixture by precipitation with mineral acids at pH<4. The influence of experimental conditions on reaction yield, as well as chromatographic separation of derivatives, were investigated. The quantitative performance was evaluated by means of a protocol comprising replicate measurements at several analyte levels. The calibration curves obtained for 8 sugars showed excellent linearity over 10–5000 pmol. Limits of detection and quantification for several monosaccharides were ca. 10 and 50 picomoles, respectively. Optimized conditions were successfully used for quantitative determination of monosaccharides released after hydrolysis from fetuin, mucin, α₁-acid glycoprotein, ovalbumin and transferrin.     

Study of complexation of gliclazide with β-cyclodextrin in solution by nmr techniques

The study of complexation between GL and -CD in liquid medium has been carried out by phase-solubility,¹H and¹³C NMR studies. A formation complex is observed from the phase solubility diagram, being the average association constant of 1094 M^–1, The NMR studies revealed the preferent complexation of the aliphatic moiety of GL. The aromatic moiety is also entrapped, but in minor extent, by the CD molecules.     

Development of analytical method for determination of Sb(V), Sb(III) and TMSb(V) in occupationally exposed human urine samples by HPLC-HG-AFS

In the present paper, we develop a methodology for antimony speciation in occupationally exposed human urine samples by high-performance liquid chromatography with hydride generation atomic fluorescence spectrometry (HPLC-HG-AFS). The methodology was applied to the determination of Sb(V), Sb(III) and (CH₃)₃SbCl₂ (TMSb(V)). Retention time of Sb(V), Sb(III) and TMSb(V) species were 0.88, 2.00 and 3.61 and the detection limits were 0.18, 0.19 and 0.12 μg L^− 1, for 100 μL loop injection respectively which is considered useful for elevated/occupationally exposed urine samples. Studies on the stability of antimony species in urine samples on the function of the elapsed time of preservation (4 °C) and storage (− 70 °C) were performed. Results revealed that antimony species are highly unstable at − 70 °C, probably due to co-precipitation reaction. In this kind of matrix transformation during preservation time may occur, such as oxidation of Sb(III) to Sb(V) and transformation into species that do not elute from the column. EDTA shows that it is able to stabilize Sb(III) for more than one week of preservation time at 4 °C avoiding co-precipitation during storage at − 70 °C. Finally the methodology was applied to occupationally exposed human urine samples. 25% of specimens present antimony levels (Sb(V)) of more than 5 μg L^− 1.     

Thermomechanical and crystallization behavior of polylactide-based flax fiber biocomposites

In this work, the rheological, thermal and mechanical properties of melt-compounded flax fiber-reinforced polylactide composites were investigated. The effect of compounding on fiber length and diameter, and the relationship between fiber content and the crystallization behavior of the biocomposites, at various temperatures, were also examined. After melt-compounding, fiber bundles initially present were, to a large extent, broken into individual fibers and the fiber length was decreased by 75 %, while the aspect ratio was decreased by nearly 50 %. The crystallization half-time was found to decrease with increasing flax fiber content, and showed a minimum value at 105 °C for all systems. The elastic modulus was increased by 50 % in the presence of 20 wt% flax fibers. The addition of maleic anhydride-grafted polylactide had a positive effect on the mechanical properties of the biocomposite. This system is particularly interesting in the context of sustainable development as it is entirely based on renewable resources and biodegradable.     

Rheological Behavior and Wear Abrasion Resistance of Polyethylene Oxide/Laponite Nanocomposites

Polymer/layered silicate nanocomposite thin films were developed as clear, transparent coatings. Laponite‐S, which is a synthetic layered clay, was dispersed in a polyethylene oxide matrix and solution cast onto glass slides for further testing. Rheological properties, wear abrasion resistance, and scratch resistance were tested for each sample to examine the nanoparticle dispersion effects on the materials' properties. In this study, we identify and characterize the materials to be used, establish the appropriate conditions for the preparation of polymer/Laponite nanocomposite dispersions, illustrate methods for the development of PEO/Laponite‐S films, and characterize the films. Results on the rheological behavior of PEO‐silicate nanocomposites as a function of Laponite solids loading and PEO concentration, as well as some preliminary wear abrasion properties of the films are presented in this study.