Effects of pressurized hot water extraction on the nanoscale structure of birch sawdust

Pressurized hot water extraction with a flow-through system was used to extract hemicelluloses and lignin from birch sawdust. The structure of the extraction residue was studied on various levels. Molecular mass distributions were determined with gel permeation chromatography and the crystal structure of cellulose was characterized using wide-angle X-ray scattering (WAXS). Information on the short-range order of cellulose microfibrils and on the nanoscale pore structure was obtained with small-angle X-ray scattering (SAXS), and the micrometre scale cellular morphology was imaged with X-ray microtomography. The pressurized hot water treatment was observed to increase the lateral width of cellulose crystallites, determined with WAXS, whereas a possible small decrease in the crystallinity of cellulose compared to native wood was detected. The molecular mass of cellulose remained at a relatively high level. According to the SAXS results, a tighter lateral association of cellulose microfibrils was observed in the extracted samples, which possibly led to opening of pores between bundles of microfibrils, as indicated by an increased specific surface area. A reduction in the thickness of the fibre cell walls was evidenced by X-ray microtomography.     

Study of the Complexation of Pb(II) with meso‐2,3‐ Dimercaptosuccinic Acid (DMSA) and 2,3‐Dimercapto‐1‐propanesulfonic acid (DMPS) Using a Bismuth‐Bulk Rotating Disk Electrode

For the first time, the suitability of bismuth bulk rotating disk electrode (BiB‐RDE) for the study of metal complexation has been tested. Cyclic (CV) and differential pulse (DPV) voltammetry have been used to study the complexation of Pb(II) with two of the most effective chelating agents for the treatment of Pb(II) poisoning (meso‐2,3‐dimercaptosuccinic acid, DMSA, and 2,3‐dimercapto‐1‐propanesulfonic acid, DMPS). Multivariate curve resolution has been applied to voltammetric data to obtain the stoichiometries and stability constants of the complexes formed. In both systems, the ML₂ complex was predominant, with log β₂ values of 10.13 and 8.80 for DMSA‐Pb(II) and DMPS‐Pb(II), respectively.     

Blood Coagulation and Living Tissue Sterilization by Floating-Electrode Dielectric Barrier Discharge in Air

Thermal plasma discharges have been widely used in the past for treatment of living human and animal tissue. However, extensive thermal damage and tissue desiccation occurs due to extreme temperatures. Some solutions have been offered where the temperature is lowered by short current pulses, addition of noble gases, or significant decrease in the size of treatment electrodes. We propose a method of direct treatment of living tissue that occurs at room temperature and pressure without visible or microscopic tissue damage. The presented Floating-Electrode Dielectric Barrier Discharge plasma is proven electrically safe to human subjects and our results show no gross (visual) or histological (microscopic) damage to skin samples in minutes, complete tissue sterilization from skin flora in seconds, and blood clot formation in seconds of electric plasma treatment. We also observe significant hastening of blood clot formation via electric plasma induced catalysis of “natural” processes occurring in human blood. A model describing these processes is offered.An erratum to this article can be found at     

Optimization of operating conditions of axially and radially viewed plasmas for the determination of trace element concentrations from ultrasound-assisted digests of soil samples contaminated by lead pellets

The method of ultrasound-assisted extraction followed by inductively coupled plasma optical emission spectrometry (ICP-OES) used for the determination of trace element concentrations (arsenic, copper, lead, antimony, and zinc) in shooting range areas was optimized. Optimization was achieved not only on the basis of the analysis of appropriate standard reference materials but also on that of 31 synthetic mixtures of matrix and analyte elements (aluminum, antimony, arsenic, calcium, copper, lead, iron, manganese, silicon, and zinc), in five concentrations. All the measurements were performed in robust plasma conditions which were tested by measuring the Mg II 280.270 nm/Mg I 285.213 nm line intensity ratio. The highest Mg II 280.270 nm/Mg I 285.213 nm line intensity ratios were observed when a nebulizer gas flow of 0.8 L min⁻¹, auxiliary gas flow of 0.2 L min⁻¹ and plasma power of 1400 W were used for both the axially and radially viewed plasmas. The analysis of 31 synthetic mixtures of the selected elements showed that As concentrations could be accurately determined with axially viewed plasma alone. The determination of Pb and Sb could be performed with either axially or radially viewed plasma whereas, surprisingly, Cu could be determined with high accuracy using radial plasma alone with a power of 1400 W. All the elements investigated were determined with high accuracy using robust plasma conditions and a combination of axially and radially viewed plasmas. The total recoveries of elements from SRM 2710 (Montana soil) and SRM 2782 (Industrial sludge) were highly comparable to leach recoveries certified by the National Institute of Standards and Technology (NIST).     

Ultrasound-assisted extraction in the determination of arsenic,cadmium, copper,lead, and silver in contaminated soil samples by inductively coupled plasma atomic emission spectrometry

An extraction method was developed for the determination of toxic elements in contaminated soil samples by inductively coupled plasma atomic emission spectrometry (ICP-AES). The determination of arsenic, cadmium, lead, and silver in ultrasound-assisted extracts of SRM 2710 and SRM 2711 by ICP-AES was carried out with high accuracy and precision (RSD<3.7%). The certified concentrations of the SRMs were obtained for arsenic, cadmium, lead, and silver by using an ultrasound-assisted extraction method with a digestion solution of (1+1)-diluted aqua regia. The determination of copper in SRMs by the ultrasound-assisted extraction method and analysis by ICP-AES failed to obtain the certified concentrations at the 95% level of confidence using (+/-2 s) as confidence limits of the mean. However, the same results were observed with the use of the microwave digestion method and reflux, which is the ISO 11466 standard method. The analysis of the SRMs showed that the ultrasound-assisted extraction method is highly comparable with the other methods used for such purposes. The major advantages of the ultrasound-assisted extraction method compared to the microwave and reflux methods are the high treatment rate (50 samples simultaneously in nine minutes) and low reagent usage, the main benefit of which are the low chloride and nitrate concentrations in the extracts.     

Disposable roll-to-roll hot embossed electrophoresis chip for detection of antibiotic resistance gene mecA in bacteria

We present a high-throughput roll-to-roll (R2R) manufacturing process for foil-based polymethyl methacrylate (PMMA) chips of excellent optical quality. These disposable, R2R hot embossed microfluidic chips are used for the identification of the antibiotic resistance gene mecA in Staphylococcus epidermidis. R2R hot embossing is an emerging manufacturing technology for polymer microfluidic devices. It is based on continuous feeding of a thermoplastic foil through a pressurized area between a heated embossing cylinder and a blank counter cylinder. Although mass fabrication of foil-based microfluidic chips and their use for biological applications were foreseen already some years ago, no such studies have been published previously.     

Ultrasound-assisted sequential extraction method for the evaluation of mobility of toxic elements in contaminated soils

A method for the fast sequential extraction of toxic elements in contaminated soil samples using an ultrasonic water bath, followed by determination with inductively coupled plasma optical emission spectrometry (ICP-OES), was developed and compared with other methods introduced in the literature. The five-step sequential extraction (Tessier scheme) was shortened using ultrasound-assisted sequential extraction (UASE). The optimization of the five-step sequential extraction was based on the analysis of SRM 2710 using Tessiers’s method as a reference. Several extracting solutions with different sonication times and temperatures were tested in the optimization procedure. Concentrations of arsenic, cadmium, copper, lead, and zinc were determined in SRM 2710, SRM 2711, and contaminated soil samples with high accuracy and precision. The certified acid-leachable concentrations of the SRM 2710 were obtained for all elements investigated by using an optimized UASE method. Tessiers’s method yielded total element concentrations that were too high. The determination of zinc in SRM 2711 yielded concentrations that were too low, whereas arsenic determination yielded concentrations that were too high by the UASE method and analysis by ICP-OES. The analysis of the SRMs showed that the UASE method is highly comparable with the other methods used for such purposes. The major advantages of the UASE method are the high treatment rate (40 samples simultaneously with a sonication time of 54 min) and a low sample and reagent usage.     

Imidotungsten(VI) complexes with chelating amino and imino phenolates

The reaction of WOCl(4) with 2,4-di-tert-butyl-6-((isopropylamino)methyl)phenol followed by the reaction with phenyl isocyanate leads to the formation of imidotungsten(VI) complex [W(NPh)Cl(3)(OC(6)H(3)(CH(2)NH-i-Pr)-2-t-Bu(2)-4,6)] 4 with a chelating aminophenolate ligand. When the same procedure was applied using aminophenols with bulkier substituents in the amino group, the final product was an unexpected Schiff-base complex [W(NPh)Cl(3)(OC(6)H(3)(CH=NPh)-2-t-Bu(2)-4,6)] 5, where the ligand is derived from 2,4-di-tert-butyl-6-((phenylimino)methyl)phenol. Complex 5 is also formed in the thermal degradation of 4. On the whole, 5 appears to be formed by a disproportionation of intermediate compounds, which are analogous to complex 4. The solid-state structures of 4 and 5 have been determined by X-ray crystallography whereas the solution structures were studied by (1)H and (13)C NMR.     

Applications of ionic liquids in electrochemical sensors

Ionic liquids (ILs) are molten salts with the melting point close to or below room temperature. They are composed of two asymmetrical ions of opposite charges that only loosely fit together (usually bulky organic cations and smaller anions). The good solvating properties, high conductivity, non-volatility, low toxicity, large electrochemical window (i.e. the electrochemical potential range over which the electrolyte is neither reduced nor oxidized on electrodes) and good electrochemical stability, make ILs suitable for many applications. Recently, novel ion selective sensors, gas sensors and biosensors based on ILs have been developed. IL gels were found to have good biocompatibility with enzymes, proteins and even living cells. Besides a brief discussion of the properties of ILs and their general applications based on these properties, this review focuses on the application of ILs in electroanalytical sensors.