Isotachophoresis of beta-blockers in a capillary and on a poly(methyl methacrylate) chip

Analysis of the beta-blockers oxprenolol, atenolol, timolol, propranolol, metoprolol, and acebutolol in human urine by a combination of isotachophoresis (ITP) and zone electrophoresis (ZE) was investigated. Methods were developed with a conventional capillary electrophoresis (CE) apparatus and a poly(methyl methacrylate) (PMMA) microchip system. With CE the separation of oxprenolol, atenolol, timolol, and acebutolol from a standard solution containing 5 microg/mL of each compound was accomplished by performing ZE with transient ITP. The electrolyte system consisted of 10 mM sodium morpholinoethane sulfonate (pH 5.5) and 0.1% methylhydroxyethylcellulose as the leading electrolyte and 30 mM ortho-phosphoric acid (pH 2.0) as both the terminating and the ZE background electrolyte. With the microchip system the separation of oxprenolol and acebutolol from a standard solution containing 10 microg/mL of each compound was accomplished by a coupled-channel ITP-ZE device using the same leading electrolyte solution as the CE system but 5 mM glutamic acid (pH 3.4) as terminating and background electrolytes. The systems were used for analyses of patient urine samples. Water-soluble hydrophilic matrix compounds were removed from the urine samples by solid-phase extraction (SPE). Limits of quantification below 5 microg/mL could be achieved. The PMMA ITP-ZE chip has not earlier been used for analyses of any drugs from urine samples.     

The triplet-state lifetime of indole in aqueous and viscous environments: significance to the interpretation of room temperature phosphorescence in proteins

The interpretation of room temperature phosphorescence studies of proteins requires an understanding of the mechanisms governing the tryptophan triplet-state lifetimes of residues fully exposed to solvent and those deeply buried in the hydrophobic core of proteins. Since solvents exposed tryptophans are expected to behave similarly to indole free in solution, it is important to have an accurate measure of the triplet state lifetime of indole in aqueous solution. Using photon counting techniques and low optical fluence (J/cm(2)), we observed the triplet-state lifetime of aqueous, deoxygenated indole and several indole derivatives to be approximately 40 micros, closely matching the previous reports by Bent and Hayon based on flash photolysis (12 micros; Bent, D. V.; Hayon, E. J. Am. Chem. Soc. 1975, 97, 2612-2619) but much shorter than the 1.2 ms lifetime observed more recently (Strambini, G. B.; Gonnelli, M. J. Am. Chem. Soc. 1995, 117, 7646-7651). However, we have now been able to reproduce the long lifetime reported by the latter workers for aqueous indole solutions and show that it likely arises from geminate recombination of the indole radical cation and solvated electron, a conclusion based on studies of the indole radical cation in water (Bent and Hayon, 1975). The evidence for this comes from a fast rise in the phosphorescence emission and measurements of a corresponding enhanced quantum yield in unbuffered solutions. This species can be readily quenched, and the corresponding fast rise disappears, leaving a monoexponential 40 micros decay, which we argue is the true indole triplet lifetime. The work is put in the context of room temperature phosphorescence studies of proteins.     

Small-volume radial flow cell for all-solid-state ion-selective electrodes

A flow cell with a radial distribution of four all-solid-state ion selective electrodes (ISEs), or alternatively three ISEs and one reference electrode, was designed and optimized for mass production. The radial distribution of the electrodes reduces the cell volume and is expected to minimize cross-contamination between different electrodes. Two different cell prototypes were developed and tested for all-solid-state K⁺-ISEs based on a solvent polymeric ion-selective membrane (ISM) and a conducting polymer, poly(3,4-ethylenedioxythiophene), as solid internal contact. In the first prototype, PEDOT was electropolymerized from an aqueous solution of the monomer and the doping ion salt, sodium polystyrenesulfonate (NaPSS). The second prototype employed an aqueous dispersion of PEDOT(PSS) that is commercially available (Baytron P, Bayer AG). Compared to electrochemical synthesis, solution casting of the polymer dispersion was found to be a more advantageous method to deposit the conducting polymer layer aiming at mass production. The resulting prototypes of the flow cell had a small volume (ca. 17-37 μl), which makes them suitable for application in clinical analysis.     

Determination of naphthodianthrones and phloroglucinols from Hypericum perforatum extracts by liquid chromatography/tandem mass spectrometry

Hypericum perforatum L. (St. John's Wort) has long been known as a medicinal plant, and has been used for the treatment of depression and neuralgic disorders. Its main active constituents are believed to be a naphthodianthrone, hypericin, and a phloroglucinol, hyperforin. A sensitive high performance liquid chromatography (HPLC)/electrospray tandem mass spectrometric method for fast simultaneous determination of six major naphthodianthrones and phloroglucinols of Hypericum perforatum extract has been developed. The method, based on multiple dissociation reaction monitoring (MRM), allows the analysis of hypericin, protohypericin, pseudohypericin, protopseudo-hypericin, hyperforin and adhyperforin from the extract in less than 5 min. Good linearity over the range 0.1-1000 ng/mL for hyperforin and 2-500 ng/mL for hypericin was observed. Intra-assay accuracy and precision varied from 2 to 19% within these ranges. Lower levels of quantitation for hyperforin were 0.5 ng/mL and 2 ng/mL for hypericin.     

Scalable synthesis of (−)-trans-3-hydroxypipecolic acid via a useful chiral building block

A scalable synthesis of (−)-trans-2-(hydroxymethyl)-1,2,3,6-tetrahydropyridin-3-ol, a versatile chiral building block is described along with its transformation to (−)-trans-3-hydroxypipecolic acid.     

Structural and transport properties of Sn–Mg alloys

In this work, the structural and transport properties of Mg-doped Sn-based alloys have been investigated. The temperature-dependent transport and structural properties of Sn–Mg alloys were investigated for five different samples (Pure Sn, Sn-1.0 wt% Mg, Sn-2.0 wt% Mg, Sn-6.0 wt% Mg and Pure Mg). Scanning electron microscopy (SEM), X-ray diffraction and energy dispersive X-ray analysis measurements were carried out in order to clarify the structural properties of the samples. It was found that the samples had tetragonal crystal symmetry, except for pure Mg which had hexagonal crystal symmetry. We also found that the cell parameters changed slightly with the addition of Mg element. The SEM micrographs of the samples showed that they had smooth surfaces with a clear grain boundary. The electrical and thermal conductivity of the samples were measured by four-point probe and the radial heat flow method, respectively. The electrical resistivity of the samples increased almost linearly with the increasing temperature. The thermal conductivity values ranged between 0.60 and 1.00 W/Km, while they decreased slightly with temperature and increased with Mg composition. The thermal conductivity values of the alloys were in between the values of pure Sn and Mg. The thermal conductivity results of the alloys were compared with other available results, and a good agreement was seen between the results. In addition, the temperature coefficients of electrical resistivity and thermal conductivity were determined; these were independent of the composition of the alloying elements.     

Synthesis of polyester from renewable feedstock: a comparison between microwave and conventional heating

1. Download high-res image (70KB)
2. Download full-size image

     

An updated version of the computational package SIMPRE that uses the standard conventions for Stevens crystal field parameters

The crystal field approach used by SIMPRE is analyzed, verifying the exactness of the results concerning energy levels and magnetic properties calculated by the package. To coincide with the prevailing conventions, we reformulate the presentation of the crystal field parameters, so that the results are now, also from a formal point of view, strictly correct. New calculations are presented to test the influence of neglecting the excited J states, a common but critical approximation employed by SIMPRE. For that, we examine the case of Er(trensal) complex (H₃trensal = 2,2′,2″‐tris(salicylideneimino)triethylamine) where the influence of this approximation is found to be minimal. A patched version of the code, SIMPRE 1.1, and an updated version of the user manual are now available. Finally, we comment on “Software package SIMPRE – revisited,” which apparently revisits a software package without inspecting or using the code. © 2014 Wiley Periodicals, Inc.     

Discrimination of Beers by Cyclic Voltammetry Using a Single Carbon Screen-printed Electrode

A fast, simple and costless methodology without sample pre-treatment is proposed for the discrimination of beers. It is based on cyclic voltammetry (CV) using commercial carbon screen-printed electrodes (SPCE) and includes a correction of the signals measured with different SPCE units. Data are submitted to partial least squares discriminant analysis (PLS−DA) and support vector machine discriminant analysis (SVM−DA), which allow a reasonable classification of the beers. Also, CV data from beers can be used to predict their alcoholic degree by partial least squares (PLS) and artificial neural networks (ANN). In general, non-linear methods provide better results than linear ones.