Fast screening method for the analysis of total flavonoid content in plants and foodstuffs by high-performance liquid chromatography/electrospray ionization time-of-flight mass spectrometry with polarity switching

A liquid chromatography/electrospray ionization mass spectrometry (LC/ESI-MS) method based on time-of-flight (TOF) MS with polarity switching and continuous exact mass measurement using a LockSpray ion source was developed for fast evaluation of the total flavonoid content in plants and foodstuffs. No complicated sample preparation was needed, but only a dilution of the extracts. A fast generic gradient elution and wide mass range acquisition was used with good sensitivity. The total analysis time was only 23 min. The ion chromatograms for flavonoid compounds were automatically extracted, and the fragmentation patterns obtained using positive ion mode and exact mass data for both polarities were used for the tentative identification of compounds. Software-based automated searching of molecular ions for flavonoids and their glycosides (xylosides/arabinosides, rhamnosides, glucosides/galactosides) from total ion chromatograms was used. The compounds were quantified using quercetin, quercitrin, rutin and kuromanine as external standards and dextromethorphan as an internal standard. The detection limits ranged from 0.01-0.04 microg/mL, while the quantitation ranges obtained were 0.2-10 microg/mL for anthocyanins and 0.2-4 microg/mL for the other flavonoids. The accuracies within these ranges varied between 80-120% and precision was in the range 0-14% (relative standard deviation). Flavonoid contents of two medicinal plants (Hypericum perforatum and Rhodiola rosea), two grape red wines, two orange juices and two green teas were evaluated using the method, and the results obtained were in good agreement with those published previously.     

Synthesis and structure of stable cis-dimethyl complex of oxotungsten(VI)

Oxotungsten(VI) complex cis-[WO(L^tBu)Me₂] (L^tBu = methylamino-N,N-bis(2-methylene-4-methyl-6-tert-butylphenolate) dianion) was prepared by the transmetallation reaction of [WO(L^tBu)Cl₂] (either cis or trans isomer) with methyl magnesium iodide. This unexpectedly stable dialkyl complex can be activated by Et₂AlCl to catalyze the ring-opening metathesis polymerization of norbornene.     

Cathodic stripping voltammetry of 2-mercaptoethanol

The behaviour of 2-mercaptoethanol at a hanging mercury drop electrode by cathodic stripping voltammetry (c.s.v.) is studied. The stripping curves are recorded by three scanning modes: rapid-scan direct-current, differential-pulse and fundamental harmonic alternating-current polarography. Under the recommended conditions, pre-electrolysis is done at a potential of 0.0 V vs. Ag/AgCl for 3 min in a medium of pH 6.7 or 8 (Britton-Robinson buffer). Then after 1 min, stripping is done at a scan rate of 6.6 mV s^?1 preferably in the differential-pulse mode. The stripping peak at about ?0.4 V is used to determine 2-mercaptoethanol within the concentration range 3 × 10^?8/2-8 × 10^?7 mol l^?1. Calibration functions are reported; the standard additions method is preferred near the limit of detection. The interferences of several organic compounds are described.     

Electrostatic Interactions That Determine the Rate of Pseudorotation Processes in Oxyphosphorane Intermediates: Implications with Respect to the Roles of Metal Ions in the Enzymatic Cleavage of RNA

The enzymatic cleavage of RNA takes place via a cyclic pentacoordinate oxyphosphorane intermediate/transition state. We carried out ab initio investigations on the neutral cyclic oxyphosphorane, which exists as a stable intermediate. As a consequence of the conformational preferences of the pentacoordinate trigonal bipyramidal intermediates, the rotation of the P-OH bonds is strongly coupled with the reaction coordinate for the pseudorotation process. In addition, the neutral PF(4)OH species has a higher barrier to pseudorotation than the corresponding anionic species PF(4)O(-). These findings are related to the positive charge of the hydrogen atoms on the equatorial oxygens in the trigonal bipyramidal structures: the hydrogen atoms preferably adopt eclipsed positions relative to the axial ligands. Fixing the cationic species in these regions causes an increase in the barrier heights for pseudorotation processes and, thus, prevents isomerization by pseudorotation. Consequently, metal coordination in the double-metal ion mechanism for enzymatic cleavage of RNA should serve to exclusively stabilize the trigonal bipyramidal intermediate/transition state for the in-line attack and departure process.     

A CASSCF study on the lowest π→π* excitation of urocanic acid

The photochemical cis/trans isomerization of urocanic acid (UCA, (E)‐3‐(1′H‐imidazol‐4′‐yl)propenoic acid) was investigated using complete active space SCF (CASSCF) ab initio calculations. The singlet ground state and the triplet and the singlet manifolds of the lowest‐lying π→π* (HOMO→LUMO) excitation of the neutral and the anionic UCA were calculated using the 6‐31G* and the 6‐31+G* basis sets, respectively. The torsional barrier of the double bond of the propenoic acid moiety in UCA is observed to be considerably lower in the T₁ and S₁ excited states of the neutral UCA and in the T₁ but not in the S₁ excited state of the anionic UCA, as compared to the S₀ state of the respective protonation form. The cis‐isomer of both the neutral and the anionic UCA is lower in energy than the trans‐isomer in the S₀, T₁, and S₁ states. This energy difference is larger in the excited states than in the ground state, probably due to strengthening of the intramolecular hydrogen bond of cis‐UCA as the molecule is excited. The results of the calculations, interpreted in terms of the idea that UCA is deprotonated upon electronic excitation, led to construction of a new model for the photoisomerization mechanisms of UCA. According to this model, the trans‐to‐cis isomerization proceeds via both the triplet and the singlet manifolds in the deprotonated form of UCA. This isomerization may occur in the S₀ state of the neutral UCA as well. The cis‐to‐trans isomerization is suggested to proceed only in the S₀ state of the neutral UCA. ©1999 John Wiley & Sons, Inc. Int J Quant Chem 72: 25–37, 1999     

Spatial and force resolution of magnetic force microscopy in current imaging

Magnetic force microscopy (MFM) can be used to image current distributions in current leads of sub-micron dimensions. Here we present a systematic study about the spatial and force resolution of such currents. In the case of force resolution, we studied the least measurable magnetic force of MFM for different sample currents. The analysis of images from parallel Al conducting plates are combined with those from force-distance curves and finite element calculations. Several interacting regimes between the magnetic tip and the currents are found and interpreted. It is shown that model calculations are necessary even for qualitative image interpretation. Then spatial resolution in the range of 100nm can well be obtained and quantitative studies of current distribution on widths of 10nm resolution are possible in special cases. The approach is demonstrated in imaging the current distribution in superconducting Bi₂Sr₂CaCu₂O _x single crystals. Presented at the VIII-th Symposium on Surface Physics, Třešt’ Castle, Czech Republic, June 28 – July 2, 1999. This work was supported in part by the Swiss Priority Program on Materials. The authors benefited greatly from discussions with D.A. Bonnell, B. Huey and C. Rüegg.     

On reflection from interfaces with some spatially dispersive metamaterials

Plane-wave reflection from interfaces with single and double wire media is considered. Such media exhibit strong spatial dispersion even at very low frequencies which causes appearance of additional waves. The problem of additional boundary conditions (ABC) in application to wire media is discussed and an ABC-free approach, known in solid state physics, is used. Expressions for the fields and Poynting vectors of refracted waves are derived. The directions and values of the power density flow of refracted waves are found and conservation of the power flow through the interface is checked.     

Plane wave propagation in a uniaxial bianisotropic medium with an application to a polarization transformer

Uniaxial bianisotropic medium is a generalization of the well-studied bi-isotropic and chiral media. It is obtained, for example, when microscopic helices with parallel axes are positioned in a host dielectric in random locations. Plane wave propagation in such a medium is studied and a simple solution for the dispersion equation and for the eigenwaves are found. As a numerical example, polarization properties of a transverse wave propagating in a uniaxial bianisotropic medium is considered. The results give a simple possibility to construct a polarization transformer with a transversely uniaxial chiral medium for changing the polarization of a propagating plane wave.     

Oxidomolybdenum(VI) complexes with atrane-type [O3N] ligands

Dioxomolybdenum(VI) complex [MoO₂Cl₂(dmso)₂] reacts with a series of tetradentate O₃N-type aminoalcohol–bisphenol ligands to form oxomolybdenum(VI) complexes of type [MoOCl(Lⁿ)]. The reaction of H₃L¹ produces [MoOCl(L¹)] as two separable isomers, whereas the reaction of H₃L² or H₃L³ yields a single product. The X-ray analyses of cis- and trans-[MoOCl(L¹)] reveal that the complexes are formed of monomeric molecules. The ligands have tetradentate coordination through three oxygen donors and one nitrogen donor, which is located trans to the terminal oxo group. The sixth coordination site is occupied by a chloro ligand.     

Impact of cavity symmetry on mode suppression and increase of free spectral range in solid-state dye microlaser

We describe modeling the solid-state dye laser with the microcavity size comparable to light wavelength.Certain symmetry in the allocation of gain material leads to depletion of odd longitudinal modes that,in turn, increases the tunability range of the microlaser. We provide simple physical explanation for the modeling results.