Magnetic field effect on indole exciplexes: a comparative study

A comparative magnetic field effect (MFE) study was done on indole exciplexes with various acceptors, anthracene, pyrene, all-s-trans-1,4-diphenylbuta-1,3-diene and 9-cyanophenanthrene. A surprisingly low magnetic field effect was detected for the 9-cyanophenanthrene exciplexes and was correlated with exciplex geometry. The wavelength dependence of magnetic field effect confirms the presence of single charge-transfer complex for all the exciplexes with 1,2-dimethylindole.     

Monoclinic CuO nanoflowers on resin support: recyclable catalyst to obtain perylene compound

Monoclinic CuO crystallite in grams has been obtained from resin bound Cu(II)-1,10-phenanthroline complex, R(-)[Cu(1,10-phen)(2)](2+) that becomes a recyclable catalyst for oxidative phenol coupling (OPC) reaction. Thus an exclusively intuitive blue fluorescing perylene derivative is derived from colorless 2,7-dihydroxynaphthalene (2,7-DHN) in high yield.     

Fabrication of Large‐Scale Hierarchical ZnO Hollow Spheroids for Hydrophobicity and Photocatalysis

We report here the preparation of a crystalline, pure hexagonal phase of ZnO as hollow 500–800 nm spheroids in the presence of organic bases, such as pyridine, using zinc acetate as the precursor salt. The spheroids exhibit unique 3D hierarchical architectures, like cocoons, and demonstrate improved superhydrophobic (water contact angle, 150°) character due to the inherited air‐trapped capillarity within the cocoon structure. The simple synthetic strategy used in this process is modified hydrothermolysis (MHT), which represents a general approach and may contribute to the formation mechanism of the hollow nanostructures with highly improved porosity. Depending on the concentration of the precursor salt, it has been possible to cover glass plates or the inner wall of a reaction vessel with ZnO nanocrystals. A low salt concentration (<0.01 M ) allows the easy preparation of a superhydrophobic glass surface, whereas a high salt concentration (>0.01 M ) results in the precipitation of cocoons at the bottom of the reaction vessel as a solid mass together with a deposited thin film of ZnO nanocrystals covering the inner wall of the glass vessel. The thickness of the film successively grows through repetitive hydrothermolysis processes for which a low salt concentration (<0.01 M ) was employed. Because of the hollow cocoonlike morphology, the surface area of the film is greatly increased, which makes it accessible for functionalization by incoming substrates from both sides (internally and externally) and helps to drive a competent photocatalytic dye degradation pathway. The heterocyclic base pyridine exclusively develops cocoons. Thus, the mechanism of self‐aggregation of ZnO nanocrystals under MHT reaction conditions has been studied and the characterization of the compounds has been supported with physical measurements.     

Quantitative Characterization of Bovine Serum Albumin, α-Lactalbumin and β-Lactoglobulin in Commercial Whey Sample by RP-LC

A simple, sensitive and precise reverse phase liquid chromatographic method has been developed and validated for quantification of bovine serum albumin (BSA), α-lactalbumin (α-La) and β–lactoglobulin (β-Lg) that are removed from whey waste by foam fractionation method. The data is reproducible over a wide concentration range. This optimized method allowed analysis of BSA, α-La, β-Lg in a mixture within 5 min and could be applied to the analysis of a variety of commercial and laboratory whey products within a short time.     

Engineering enzyme specificity using computational design of a defined-sequence library

Engineered biosynthetic pathways have the potential to produce high-value molecules from inexpensive feedstocks, but a key limitation is engineering enzymes with high activity and specificity for new reactions. Here, we developed a method for combining structure-based computational protein design with library-based enzyme screening, in which inter-residue correlations favored by the design are encoded into a defined-sequence library. We validated this approach by engineering a glucose 6-oxidase enzyme for use in a proposed pathway to convert D-glucose into D-glucaric acid. The most active variant, identified after only one round of diversification and screening of only 10,000 wells, is approximately 400-fold more active on glucose than is the wild-type enzyme. We anticipate that this strategy will be broadly applicable to the discovery of new enzymes for engineered biological pathways.     

Electrochemistry and photoelectron spectroscopy of oxomolybdenum(V) complexes with phenoxide ligands: effect of para substituents on redox potentials,heterogeneous electron transfer rates,and ionization energies

Complexes of the form (Tp*)MoOCl(p-OC(6)H(4)X) and (Tp*)MoO(p-OC(6)H(4)X)(2) (Tp* = hydrotris(3,5-dimethyl-1-pyrazolyl)borate and X = OEt, OMe, Et, Me, H, F, Cl, Br, I, and CN) were examined by electrochemical techniques and gas-phase photoelectron spectroscopy to probe the effect of the remote substituent (X) on electron-transfer reactions at the oxomolybdenum core. Cyclic voltammetry revealed that all of these neutral Mo(V) compounds undergo a quasireversible one-electron oxidation (Mo(VI)/Mo(V)) and a quasireversible one-electron reduction (Mo(V)/Mo(IV)) at potentials that linearly depend on the electronic influence (Hammett sigma(p) parameter) of X. The first ionization energies for (Tp*)MoO(p-OC(6)H(4)X)(2) (X = OEt, OMe, H, F, and CN) were determined by photoelectron spectroscopy. A nearly linear correlation was found for the Mo(VI)/Mo(V) oxidation potentials in solution and the gas-phase ionization energies. Calculated heterogeneous electron-transfer rate constants show a slight systematic dependence on the substituent.     

One-pot thioetherification of aryl halides with thiourea and benzyl bromide in water catalyzed by Cu-grafted furfural imine-functionalized mesoporous SBA-15

Surface functionalization of SBA-15 followed by its reaction with Cu(OAc)(2) has been carried out to develop a new Cu-grafted functionalized mesoporous material, which catalyzes one-pot three component coupling of different aryl halides with thiourea and benzyl bromide in aqueous medium to produce aryl thioethers in very good yields (80-88%).     

Diorganotin(IV) complexes of polyaromatic azo‐azomethine ligand derived from salicylaldehyde and ortho‐aminophenol: Synthesis,characterization, and molecular structures

The diorganotin(IV) complexes of methyl 2‐{4‐hydroxy‐3‐[(2‐hydroxy‐phenylimino)‐methyl]‐phenylazo}‐benzoate (H2L) were obtained by the reaction of ortho‐aminophenol, R₂SnO (R = Me, ⁿBu, or Ph) and methyl 2‐[(E)‐(3‐formyl‐4‐hydroxy)diazenyl]benzoate (H2PL²) in ethanol, which led to diorganotin(IV) compounds of composition [Me₂SnL]₂ ( 1 ), ⁿBu₂SnL ( 2 ), and Ph₂SnL ( 3 ) in good yield. The ¹H, ¹³C, and ¹¹⁹Sn NMR, IR, the mass spectrometry along with elemental analyses allowed establishing the structure of ligand (H2L) and compounds 1–3 . In all the three cases, ¹¹⁹Sn chemical shifts are indicators of five‐coordinated Sn atoms in a solution state. The crystal structures of ligand H2L and complexes 1 and 2 were determined by a single crystal X‐ray diffraction study. In the solid state, the ligand H2L exists as a keto‐enamine tautomeric form. The molecular structure of complex 1 in the solid state shows a distorted octahedral geometry around a tin atom due to additional coordination with an oxygen atom from a neighboring molecule leading to a four‐membered ring with Sn‐O···Sn‐O intermolecular coordination, leading to a dimeric species. On the other hand, complex 2 is a monomer with trigonal bipyramidal geometry surrounding the tin atom. © 2012 Wiley Periodicals, Inc. Heteroatom Chem 23:457–465, 2012; View this article online at wileyonlinelibrary.com . DOI 10.1002/hc.21037     

Immobilized dimeric chiral Mn(III) salen complex on short channel ordered mesoporous silica as an effective catalyst for the epoxidation of non-functionalized alkenes

Chiral dimeric Mn(III) salen complex with 1R, 2R-(?)-diaminocyclohexane collar was immobilized on short channel large pore sized silica through a long linker of {(CH₂)₃–NH–melamine–piperazine} to investigate its performance in enantioselective epoxidation of chromenes, indene, styrene and cis β-methyl styrene in the presence of pyridine N-oxide (PyNO) as an axial base using aqueous NaOCl as an oxidant at 0 °C. The immobilized catalyst system showed high turnover frequency (TOF) and enantioselectivity for the smaller and bulkier alkenes like styrene, indene, 2,2-dimethylchromene and 6-cyano-2,2-dimethylchromene (ee up to 98%). These results are the best reported for heterogeneous catalyst under biphasic reaction conditions and were comparable to the dimeric Mn(III) salen system under homogeneous condition. The performance of the immobilized catalyst was retained for six reuse experiments. This protocol was extended to the synthesis of an antihypertensive drug (S)-Levchromakalim (ee 98%) at 1 g level.     

Structurally Stabilized Organosilane‐Templated Thermostable Mesoporous Titania

Structurally thermostable mesoporous anatase TiO₂ (m‐TiO₂) nanoparticles, uniquely decorated with atomically dispersed SiO₂, is reported for the first time. The inorganic Si portion of the novel organosilane template, used as a mesopores‐directing agent, is found to be incorporated in the pore walls of the titania aggregates, mainly as isolated sites. This is evident by transmission electron microscopy and high‐angle annular dark field scanning transmission electron microscopy, combined with electron dispersive X‐ray spectroscopy. This type of unique structure provides exceptional stability to this new material against thermal collapse of the mesoporous structure, which is reflected in its high surface area (the highest known for anatase titania), even after high‐temperature (550 °C) calcination. Control of crystallite size, pore diameter, and surface area is achieved by varying the molar ratios of the titanium precursor and the template during synthesis. These mesoporous materials retain their porosity and high surface area after template removal and further NaOH/HCl treatment to remove silica. We investigate their performance for dye‐sensitized solar cells (DSSCs) with bilayer TiO₂ electrodes, which are prepared by applying a coating of m‐TiO₂ onto a commercial titania (P25) film. The high surface area of the upper mesoporous layer in the P25–m‐TiO₂ DSSC significantly increases the dye loading ability of the photoanode. The photocurrent and fill factor for the DSSC with the bilayer TiO₂ electrode are greatly improved. The large increase in photocurrent current (ca. 56 %) in the P25–m‐TiO₂ DSSC is believed to play a significant role in achieving a remarkable increase in the photovoltaic efficiency (60 %) of the device, compared to DSSCs with a monolayer of P25 as the electrode.