The condensation of salicylaldehydes and malononitrile revisited: synthesis of new dimeric chromene derivatives

The reaction of salicylic aldehydes with malononitrile was reinvestigated, and the reaction pathway was followed by 1H NMR spectroscopy. A delicate control of the experimental conditions allowed the synthesis of 2-imino-2H-chromene-3-carbonitriles 1, (2-amino-3-cyano-4H-chromen-4-yl)malononitriles 2, 4-amino-5-imino-2,7-dimethoxy-5H-chromeno[3,4-c]pyridine-1-carbonitrile 12, and (4,5-diamino-1-cyano-1,10b-dihydro-2H-chromeno[3,4-c]pyridin-2-ylidene)malononitrile 13. Two novel 2-iminochromene dimers, with structures 8 and 9, were isolated and fully characterized. The activity of compound 8a on Aspergillus spp. growth and on ochratoxin A production was evaluated. The results of the bioassays indicate that compound 8a, applied at concentrations of 2 mM, totally inhibited the growth of the fungi tested. Ochratoxin A production by Aspergillus alliaceus was reduced by about 93% with a 200 microM solution of this compound. A moderate inhibitory effect was observed for the analogous structure 8b, and no inhibition was registered for compounds 2 and 1, used as synthetic precursors of the dimeric species 8.     

An expeditious method for the determination of organochlorine pesticides residues in estuarine sediments using microwave assisted pre-extraction and automated headspace solid-phase microextraction coupled to gas chromatography-mass spectrometry

Determination of organochlorine pesticides (OCPs) in sediments implicates extraction of these compounds from the matrix, which is difficult owing to strong interaction among OCPs and different constituents of the sediments, particularly organic content. The method here described is a combination of microwave assisted extraction (MAE), headspace solid-phase microextraction (HS-SPME) and gas chromatography-mass spectrometry (GC-MS), acting in selected-ion storage mode, or GC-electron capture detector (ECD, for routine analysis). Methanol was used as extracting solvent and aliquots of the MAE extracts (after inclusion of a step for sulfur elimination when required) were used to prepare aqueous solutions for HS-SPME. A complete automation of the SPME procedure increases the sample throughput, including standard addition for calibration purpose. The procedure has the advantage of exclude additional clean-up steps and pre-concentration before SPME. Application to reference sediments of different characteristics revealed absence of significant interferences from the matrix for alpha-lindane, gamma-lindane, aldrin, dieldrin, endrin, 4,4'-DDT, 4,4'-DDD, 4,4'-DDE, heptachlor, heptachlor epoxide and good sensitivity. Detection limits ranged from 0.005 to 0.11 ng of OCP per gram of dried sediment using GC-MS and from 0.01 to 0.26 ngg(-1) using GC-ECD. The linear response ranges embraced 5-6 orders of magnitude (up to 1000 ngg(-1)) in GC-MS, being narrower for GC-ECD. The method was successfully applied to sandy and muddy sediments from Portuguese rivers estuaries, enabling quantification of seven OCPs. The method resulted effective, relatively simple and fast, being suitable for routine monitoring of residues of OCPs from sediments of different grain size and organic matter content, which influence concentration, mobility and availability of contaminants.     

Rutin as an Electrochemical Mediator in the Determination of Captopril using a Graphite Paste Electrode

A simple, rapid and sensitive cyclic voltammetry method is described for the determination of the antihypertensive drug captopril in aqueous solution using a graphite paste electrode with rutin as mediator. The catalytic role of rutin in the oxidation of captopril was confirmed by the increase observed in anodic peak current at+0.44 V vs. SCE in the presence of the mediator. Anodic peak current varied linearly with the concentration of captopril in the dynamic range 0.2 to 1.0 mmol L^?1. The method exhibited a limit of detection of 89.4 μmol L^?1 and a reproducibility of 1 %, values that are comparable with those exhibited by other methodologies employing electrodes without any modification. The recovery rate for the determination of captopril in a pharmaceutical sample was good (91.21 %) suggesting that the described analytical technique would be effective in industrial applications whilst offering a number of advantages over published cyclic voltammetric methods.     

A comparative multi-reference configuration interaction study of the low-lying states of two thione isomers of thiophenol

Multi-reference configuration interaction, MR-CI (including extensivity corrections, named +Q), calculations were performed on the S₀–S₃ states of cyclohexa-2,4-diene-1-thione (thione 24 ) and cyclohexa-2,5-diene-1-thione (thione 25 ), which are thione isomers of thiophenol. Several types of uncontracted MR-CIS and MR-CISD wavefunctions were employed, comprising MR-CI expansions as large as ~365 × 10⁶ configuration state functions. The nature of the studied excited states was characterized. Vertical excitation energies (ΔE) and oscillator strengths (f) were computed. The most intense transitions (S₀ → S₂ for 24 and S₀ → S₃ for 25 ) did not change with the wavefunction, although a variation as large as ~1 eV was obtained for the S₃ state of 24 , at the highest (MR-CI+Q) level. On the other hand, ΔE changed at most by ~0.56 eV for 25 as the wavefunction changes, at the same level. The S₁ state of both thiones was found to have nπ* character and is in the visible region. For 24 , S₂ and S₃ are ππ* and nπ* states, respectively, while for 25 the reverse order is obtained. S₂ and S₃ are in the range ~3.5 to 5.2 eV, again at the highest level. It is the first time that the excited states of the title molecules are studied. The computed results agree with the experimental onset of photoreactions of thiones 24 and 25 found by Reva et al (Phys. Chem. Chem. Phys., 2015 , 17, 4888).     

Ionization by pH and Anionic Surfactant Binding Gives the Same Thickening Effects of Crosslinked Polyacrylic Acid Derivatives

Physical properties of aqueous solutions of hydrophobically modified crosslinked polyacrylic acids change quite extensively as the polymer is charged up. A study is carried out concerning the similarities between two polymer ionization processes, that is, by pH increment and anionic surfactant addition. The two processes charge the polymer by distinctly different mechanisms. At sufficiently high pH the carboxylic groups of the polymer are virtually all ionized and the polymer is, therefore, fully charged. The effective repulsion among the charged groups due to the entropy of the counterions promotes an increased stiffness as well as an expansion of the polymer particles. We investigate here how the ionization and swelling will be if, instead of high pH, the polymer is at low pH conditions but associated to ionic surfactants. Surfactants associate to the polymer both in a noncooperative way by the binding of individual surfactant molecules and in a cooperative way as micelles since the polymer promotes surfactant self-assembly. This binding leads to a highly charged polymer-surfactant complex and leads to an osmotic swelling as well. The swelling and the gelation were monitored by rheology and dynamic light scattering, of polymer solutions by varying the pHs and adding ionic surfactants at low pH. The results show that ionization by surfactants and by pH lead to approximately the same gelation degree, as can be seen by similar viscosity values. Both processes result in dramatic viscosity increases, up to 8 orders of magnitude. More hydrophobic surfactants, with longer alkyl chain, are shown to be more efficient as enhancers of swelling and gelation. The network that is formed at high pH or at sufficiently high concentration of surfactant can be weakened or even disrupted if monovalent or divalent salts are added, demonstrating the role of counterion entropy.     

Target‐Induced and Equipment‐Free DNA Amplification with a Simple Paper Device

We report on a paper device capable of carrying out target‐induced rolling circle amplification (RCA) to produce massive DNA amplicons that can be easily visualized. Interestingly, we observed that RCA was more proficient on paper than in solution, which we attribute to a significantly higher localized concentration of immobilized DNA. Furthermore, we have successfully engineered a fully functional paper device for sensitive DNA or microRNA detection via printing of all RCA‐enabling molecules within a polymeric sugar film formed from pullulan, which was integrated with the paper device. This encapsulation not only stabilizes the entrapped reagents at room temperature but also enables colorimetric bioassays with minimal steps.     

Superparamagnetic gamma-Fe(2)O(3) nanoparticles with tailored functionality for protein separation

Polymer coated superparamagnetic gamma-Fe(2)O(3) nanoparticles were derivatized with a synthetic double-stranded RNA [poly(IC)], a known allosteric activator of the latent (2-5)A synthetase, to separate a single 35 kDa protein from a crude extract which cross reacted with antibodies raised against the sponge enzyme.     

A highly efficient dioxo(mu-oxo)molybdenum(VI) dimer catalyst for olefin epoxidation

The oxo-bridged dimer [Mo(2)O(4)(mu(2)-O)Cl(2)(pzH)(4)] (1; pzH = pyrazole) exhibits unusually high activity in the liquid-phase catalytic epoxidation of the cyclic olefins cyclooctene and (R)-(+)-limonene under mild conditions and in the absence of additional organic solvents, using tert-butyl hydroperoxide as the oxidant. The complex is stable under the reaction conditions and can be used in further catalytic runs without significant loss of performance. An X-ray crystallographic investigation reveals that 1 has an unprecedented and extremely rare all-cis configuration at each of the MoO(2)-(mu(2)-O)Cl(pzH)(2) cores, which can be understood by considering supramolecular contacts and geometric factors.     

A novel microporous copper silicate: Na2Cu2Si4O11.2H2O

The synthesis and structural characterisation of a thermally stable novel three-dimensional microporous copper silicate open-framework are described; the material is capable of undergoing reversible zeolitic water removal without destruction of the framework.     

New designs for inhibitors of the NF-κB: DNA binding

We present a series of new inhibitors of the association between nuclear factor kappa B (NF-B) and the corresponding B site in DNA. They were designed using the lead compound 15-deoxy-^12,14 -prostaglandin J₂ (PGJ2), which is a natural product with demonstrated inhibitory efficiency for this system. First, the binding mode of PGJ2 to NF-B was unraveled by GOLD docking calculation. Subsequently, substitutions were made to PGJ2 to optimize its association with NF-B. Care was taken not to strongly increase the reactivity of the new compounds, and to keep the overall shape, size and hydrophilicity of the lead compound, which should render them a similar bioavailability. Molecular mechanics calculations were performed to decide on the suitability of the substitutions, and to evaluate the energies of association with NF-B. Density functional theory calculations were performed also to study the overall reactivity of the substituted drugs towards NF-B. Important general conclusions were obtained, concerning the improvement of these natural inhibitors; namely, a set of rational methodologies were deduced to improve the association between the PGJ2 derivatives and NF-B, and their efficiency demonstrated by generating a set of substituted complexes, some of them with a very much increased affinity for NF-B, opening new doors to enlarge the therapeutic capabilities of this class of drugs.