Determination of amoxapine and nortriptyline in blood plasma and serum by salt-assisted liquid-liquid microextraction and high-performance liquid chromatography

A new, selective and sensitive method has been developed for the determination of tricyclic antidepressant drugs, amoxapine and nortriptyline, in human blood plasma and serum, involving their reaction with allyl isothiocyanate and extraction of thiourea derivatives with water-miscible organic solvent acetonitrile. The phase separation was effected by addition of ammonium sulphate, a process called salt-assisted liquid-liquid microextraction. The extract was analyzed by HPLC with UV detection at 254?nm. The method has been optimized for derivatization reaction time and temperature, solvent for extraction, and salt for solvent phase separation. Under the optimal conditions, a linear calibration graph was obtained between the amount of drug and the peak area of thiourea derivatives in the range of 0.002-20?mg/L drugs. The correlation coefficient and limit of detection values for amoxapine and nortriptyline in serum/plasma samples were in the range of 0.9953-0.9999 and 0.46-0.58?μg/L, respectively. The recovery in spiking experiments ranged, respectively, 75-88% (RSD 3.4-7.2%) and 79-97% (RSD 3.7-7.9%) for the two drugs.     

Measurement of the neutrino mass splitting and flavor mixing by MINOS

Measurements of neutrino oscillations using the disappearance of muon neutrinos from the Fermilab NuMI neutrino beam as observed by the two MINOS detectors are reported. New analysis methods have been applied to an enlarged data sample from an exposure of 7.25×10(20) protons on target. A fit to neutrino oscillations yields values of |Δm(2)|=(2.32(-0.08)(+0.12))×10(-3) eV(2) for the atmospheric mass splitting and sin(2)(2θ)>0.90 (90% C.L.) for the mixing angle. Pure neutrino decay and quantum decoherence hypotheses are excluded at 7 and 9 standard deviations, respectively.     

High-temperature impedance and modulus spectroscopy characterization of La/Mn modified PbTiO3 nanoceramics

Nanocrystalline samples of Pb_1−yLa_y(Ti_1−xMn_x)_(1−y/4)O₃ (PLMT) (y=0.06, x=0, 0.04, 0.07 and 0.10) were prepared by mechanical activation process (i.e., ball milling) followed by some annealing. The formation of single phase tetragonal crystal structure is confirmed by high-resolution X-ray diffraction study and by High resolution transmission electron micrographs (HRTEM), nano-scale compounds. The electrical behavior (i.e., impedance (Z) and electrical modulus (M)) of PLMT ceramics was studied by impedance spectroscopy technique in high temperature range. This study was carried out by means of the simultaneous analysis of the complex impedance (Z^?) and electrical modulus (M^*) functions in a wide frequency range (1 kHz-1 MHz). Impedance analysis has shown the grain and grain boundary contributions by an equivalent circuit model. Modulus analysis has provided vast information on charge transport processes. The simultaneous representation of the imaginary part of impedance and electric modulus (Z″, M″) vs. frequency revealed the localization of relaxation. The activation energy obtained from relaxation data may be attributed to oxygen ion vacancies.     

Influence of catalyst binder on the acidity and activity/selectivity of Ga/H-ZSM-5 zeolite in propane aromatization

The acidity and initial and time-on-stream activity in propane aromatization (at 550°C, space velocity of 3100 cm³g⁻¹ _(zeolite)h⁻¹) of Ga-impregnated H-ZSM-5 zeolite without or with binders (50 wt%), such as silica, alumina and kaolin, have been investigated. Both the acidity and catalytic activity of the zeolite are influenced by the presence of binder in the catalyst, depending upon the binder. The influence is found to be lowest for alumina and highest for kaolin. Among the binders, alumina is the most preferred binder for the zeolite catalyst.     

Synthesis and characterisation of urethane-methacrylates I

The paper describes the synthesis of urethane methacrylate resins by reaction of tolylene diisocyanate (TDI), butanol-1 (B) and 2-hydroxyethylmethacrylate (HEMA) by a two step procedure. Characterisation was done using FT-IR, FT-NMR, Mass Spectroscopy. The effect of temperature on the UV-curing behaviour was investigated by differential photocalorimetry. An activation energy of 8.4 kJ/mole was found in the temperature range of 50–100°C. Free radical polymerisation in presence of benzoyl peroxide was also investigated. The polymers were stable upto 200°C in N₂ atmosphere. A two step decomposition was observed in the temperature range of 200–500°C.

---

Zusammenfassung Vorliegende Arbeit beschreibt die Synthese von Urethan-methacrylat-Harzen durch die Reaktion von Toluylendiisocyanat (TDI), Butanol-1 (B) und 2-Hydroxyethylmethacrylat (HEMA) in einem zweistufigen Herstellungsverfahren. Charakterisiert wurden die Produkte mittels FT-IR, FT-NMR und Massenspektroskopie. Anhand von Differentialfotokalorimetrie wurde der Einfluß der Temperatur auf das UV-Aushärtungsverhalten untersucht. Im Temperaturbereich 50–100°C wurde eine Aktivierungsenergie von 8.4 kJ/mol gefunden. Weiterhin wurde auch die Radikalkettenpolimerisation in Gegenwart von Benzoylperoxid untersucht. In Stickstoffatmosphäre sind die Polymere bis 200°C stabil. Im Temperaturbereich 200–500°C wurde eine zweistufige Zersetzung beobachtet.

---

---

The Instrument system of E. I. DuPont de Nemours & Co. is acknowledged for differential photocalorimeter studies.     

Study of the forced degradation behavior of prasugrel hydrochloride by liquid chromatography with mass spectrometry and liquid chromatography with NMR detection and prediction of the toxicity of the characterized degradation products

Prasugrel was subjected to forced degradation studies under conditions of hydrolysis (acid, base, and neutral), photolysis, oxidation, and thermal stress. The drug showed liability in hydrolytic as well as oxidative conditions, resulting in a total of four degradation products. In order to characterize the latter, initially mass fragmentation pathway of the drug was established with the help of mass spectrometry/time‐of‐flight, multiple stage mass spectrometry and hydrogen/deuterium exchange data. The degradation products were then separated on a C₁₈ column using a stability‐indicating volatile buffer method, which was later extended to liquid chromatography‐mass spectrometry studies. The latter highlighted that three degradation products had the same molecular mass, while one was different. To characterize all, their mass fragmentation pathways were established in the same manner as the drug. Subsequently, liquid chromatography‐nuclear magnetic resonance (NMR) spectroscopy data were collected. Proton and correlation liquid chromatography with NMR spectroscopy studies highlighted existence of diastereomeric behavior in one pair of degradation products. Lastly, toxicity prediction by computer‐assisted technology (TOPKAT) and deductive estimation of risk from existing knowledge (DEREK) software were employed to assess in silico toxicity of the characterized degradation products.