Liquid–liquid equilibrium and interfacial tension of the ternary system heptane + thiophene + 1-ethyl-3-methylimidazolium bis(trifluoromethanesulfonyl)imide

The liquid–liquid equilibrium (LLE) of the ternary system comprising heptane, thiophene and the ionic liquid 1-ethyl-3-methylimidazolium bis(trifluoromethanesulfonyl)imide ([C₂mim][NTf₂]) was determined at 25 °C and atmospheric pressure, for preliminary evaluation of the potential of this ionic liquid as solvent for the desulfurisation of transportation fuels. Classical parameters such as solute distribution ratio and selectivity were calculated from the LLE data and subsequently analysed. The LLE data were also correlated by means of the ‘Non-Random Two-Liquid’ (NRTL) equation. Besides the LLE, another critical property for the design of extraction processes, namely the interfacial tension, was determined in parallel, throughout the immiscibility domain of the ternary system. For the first time, the LLE and the interfacial tension of a ternary system involving an ionic liquid are jointly reported.     

Triggered alternans in an ionic model of ischemic cardiac ventricular muscle

It has been known for several decades that electrical alternans occurs during myocardial ischemia in both clinical and experimental work. There are a few reports showing that this alternans can be triggered into existence by a premature ventricular contraction. Detriggering of alternans by a premature ventricular contraction, as well as pause-induced triggering and detriggering, have also been reported. We conduct a search for triggered alternans in an ionic model of ischemic ventricular muscle in which alternans has been described recently: a one-dimensional cable of length 3 cm, containing a central ischemic zone 1 cm long, with 1 cm segments of normal (i.e., nonischemic) tissue at each end. We use a modified form of the Luo-Rudy [Circ. Res. 68, 1501-1526 (1991)] ionic model to represent the ventricular tissue, modeling the effect of ischemia by raising the external potassium ion concentration ([K(+)](o)) in the central ischemic zone. As [K(+)](o) is increased at a fixed pacing cycle length of 400 ms, there is first a transition from 1:1 rhythm to alternans or 2:2 rhythm, and then a transition from 2:2 rhythm to 2:1 block. There is a range of [K(+)](o) over which there is coexistence of 1:1 and 2:2 rhythms, so that dropping a stimulus from the periodic drive train during 1:1 rhythm can result in the conversion of 1:1 to 2:2 rhythm. Within the bistable range, the reverse transition from 2:2 to 1:1 rhythm can be produced by injection of a well-timed extrastimulus. Using a stimulation protocol involving delivery of pre- and post-mature stimuli, we derive a one-dimensional map that captures the salient features of the results of the cable simulations, i.e., the {1:1-->2:2-->2:1} transitions with {1:1<-->2:2} bistability. This map uses a new index of the global activity in the cable, the normalized voltage integral. Finally, we put forth a simple piecewise linear map that replicates the {1:1<-->2:2} bistability observed in the cable simulations and in the normalized voltage integral map. (c) 2002 American Institute of Physics.     

Surface normal regions in superconducting Zr70Cu30 induced by thermal relaxation

Penetration depth measurements show that thermal heat treatment in amorphous Zr₇₀Cu₃₀ induces a normal region 5000 Å thick at the surface of ultrarapid quenched ribbons. Upper critical field measurements indicate that the new induced phase is a normal one while the rest of the sample remains as a homogeneous superconducting phase.     

A kinetic study of the decomposition of N-bromoserine

This article reports the kinetics of the decomposition of N-bromoserine formed rapidly by bromation of serine by BrO^?. The main decomposition products are glycolaldehyde, ammonia, carbon dioxide, and bromide ions at pH < 11.5, and β-hydroxypyruvic acid, ammonia, and bromide ions at pH > 11.5. The reaction is of order one with respect to N-bromoserine, and is independent of ionic strength and excess serine. The rate constant increases with increasing pH at pH > 11 and with decreasing pH at pH < 8, and over the range pH 8–11 has the constant value 1.67 × 10^?3 s^?1 at 298 K.     

Single and double A3-coupling (aldehyde-amine-alkyne) reaction catalyzed by an air stable copper(I)-phosphole complex

An air stable copper(I)-phosphole complex, [CuCl{2,5-bis(2-thienyl)-1-phenylphosphole}₂] (1), was utilized as a catalyst in single and double A³-coupling reactions for preparing mono- and bi-propargylamines. A variety of aldehydes, amines and terminal alkynes were tested. Most of these reactions led to formation of the expected propargylamines in good yields using low amounts catalyst and obviating both the use of purified reagents as employ of a glovebox.     

Physical properties and phase equilibria of the system isopropyl acetate + isopropanol + 1-octyl-3-methyl-imidazolium bis(trifluoromethylsulfonyl)imide

Densities, refractive indices and dynamic viscosities of binary and ternary mixtures composed of isopropyl acetate, isopropanol, 1-octyl-3-methyl-imidazolium bis(trifluoromethylsulfonyl)imide ([C₈mim][NTf₂]) have been determined at 298.15 K and atmospheric pressure. The excess molar volumes and dynamic viscosity changes of mixing have been calculated and correlated using the Redlich–Kister polynomial equation. Isobaric vapour–liquid equilibrium (VLE) data have been determined experimentally for these binary and ternary systems at 101.32 kPa. The equilibrium data have been adequately correlated by means of Wilson, NRTL, and UNIQUAC equations for the liquid phase activity coefficient.     

Evaluation of the polysubstituted pyridinium ionic liquid [hmmpy][Ntf2] as a suitable solvent for desulfurization: Phase equilibria

Suitability of a pyridinium ionic liquid as a solvent in desulfurization has been analyzed. (Liquid + liquid) equilibria for ternary systems composed by 1-hexyl-3,5-dimethyl pyridinium {bis[trifluoromethylsulfonyl]imide, thiophene, and three hydrocarbons representative of fuel (n-heptane, 2,2,4 trimethylpentane, and toluene) have been determined at T = 298.15 K and atmospheric pressure. High solubility of thiophene in the ionic liquid and also of toluene have been found, being this solvent practically immiscible with 2,2,4 trimethylpentane and heptane. Equilibrium data of these systems have been well correlated with UNIQUAC equations finding the highest deviations for the ternary system involving toluene. NRTL model drove to worse results being considered as not suitable model to correlate the experimental results.     

The ETACS European Project for testing the comparability of sensors and analysers: Part II. Field tests

 The results of field tests performed within the European Testing and Assessment of Comparability of On-line Sensors/Analysers (ETACS) European Project are presented in this article. This work is complementary to the laboratory tests, already published in Part I in this Journal. The objective was to consider the complete measuring chain, including the sensor/analyser, sampling elements, pumping and conditioning devices needed for a particular application. These aspects were not included in the laboratory tests and, therefore, new facets were involved. Field tests are considered site specific in terms of the sample dynamic range and matrix composition, as well as event dependent with respect to environmental conditions. A protocol for checking the performance of sensors/analysers working in a field location is presented. The protocol is a general guide and, therefore, can be used independently of the nature of the sensor/analyser under evaluation.     

Isobaric vapor–liquid equilibria of 1,1-dimethylethoxy-butane + methanol or ethanol + water at 101.32 kPa

Isobaric vapor–liquid equilibrium data (VLE) at 101.325 kPa have been determined in the miscible region for 1,1-dimethylethoxy-butane (BTBE) + methanol + water and 1,1-dimethylethoxy-butane (BTBE) + ethanol + water ternary systems, and for their constituent binary systems, methanol + BTBE and ethanol + BTBE. Both binary systems show an azeotrope at the minimum boiling point. In the ternary system BTBE + methanol + water no azeotrope has been found, however, the system BTBE + ethanol + water might form a ternary azeotrope near the top of the binodal. Thermodynamically consistent VLE data have been satisfactorily correlated using the UNIQUAC, NRTL and Wilson equations for the activity coefficient of the liquid phase. Temperature and vapor phase compositions have been compared with those calculated by the group-contribution methods of prediction ASOG, and the original and modified UNIFAC. Predicted values are not in good agreement with experimental values.