Raman Characterization of Pigments in Painted Beams and a Wall Painting Discovered in the San Francisco Church in Santiago,Chile

A material characterization of two artworks discovered in the San Francisco Church, Santiago, Chile, was performed using micro-Raman spectroscopy. Structural painted beams and a wall painting that belong to the same time period, between the end of the 17th and 19th centuries, were analyzed. The cross-section samples of both artworks were characterized and animal protein was identified in the ground layer in both cases. The supporting material of the beams was identified as cypress wood, and a rag paper layer was used as a base for the paint layer, which is composed mainly of a white ground layer on which the color was subsequently added; the yellow pigments are orpiment and chrome yellow; the green color probably arises from a mixture of orpiment, red lead, ultramarine blue, and calcite. A complete analysis of the materials using complementary techniques such as microchemistry and optical microscopy indicates that the mural was painted using a mixed technique and that organic and inorganic pigments were used. The identification of the synthetic pigment ultramarine blue in some blue areas of the wall revealed a modification of the wall painting in the 19th century; dark blue areas resulted from a mixture of indigo, palygorskite, and lazurite.     

Rhodium‐Catalyzed Intramolecular [3+2+2] Cycloadditions between Alkylidenecyclopropanes,Alkynes, and Alkenes

A Rh‐catalyzed intramolecular [3+2+2] cycloaddition is reported. The cycloaddition affords synthetically relevant 5,7,5‐fused tricyclic systems of type 2 from readily available dienyne precursors. The transformation takes place with moderate or good yields, high diastereoselectivity, and total chemoselectivity.     

Photoluminescence in silicon/silicon oxide films produced by the Pulsed Electron Beam Ablation technique

In this work we report studies of the photoluminescence emission in samples based on Si/SiO_x films deposited by the Pulsed Electron Beam Ablation (PEBA) technique. The samples were prepared at room temperature using targets with different Si/SiO₂ concentrations. The samples were characterized using X-ray Absorption Edge Spectroscopy (XANES) at the Si―K edge, Raman spectroscopy, Photoluminescence (PL) and X-ray Photoelectron Spectroscopy (XPS). The concentration of a-Si and nc-Si in the film was dependent on the silicon concentration in the target. It was also observed that the PL is strongly dependent on the structural amorphous/crystalline arrangement.     

Synthesis of stemofoline analogues as acetylcholinesterase inhibitors

Thirty-two new stemofoline analogues were prepared from didehydrostemofoline for studies as AChE inhibitors. C-3 Side-chain modified amino, carbamate, triazole and oxazole stemofoline derivatives were prepared. In general the amine derivatives were found to be stronger inhibitors of AChE than their alcohol analogues that we previously reported. Compounds 5 and 26, with small C-3 side-chain substituents, were two of the most active inhibitors. Preliminary molecular docking studies suggested that these compounds may inhibit AChE by binding horizontally along the passage of the active-site gorge and block access to acetylcholine.     

A generalization of a theorem of Foxby

In this paper, it is proved that a commutative noetherian local ring admitting a finitely generated module of finite projective and injective dimensions with respect to a semidualizing module is Gorenstein. This result recovers a celebrated theorem of Foxby.      

Implicit Subgrid-Scale Modeling of a Mach 2.5 Spatially Developing Turbulent Boundary Layer

We employ numerically implicit subgrid-scale modeling provided by the well-known streamlined upwind/Petrov–Galerkin stabilization for the finite element discretization of advection–diffusion problems in a Large Eddy Simulation (LES) approach. Whereas its original purpose was to provide sufficient algorithmic dissipation for a stable and convergent numerical method, more recently, it has been utilized as a subgrid-scale (SGS) model to account for the effect of small scales, unresolvable by the discretization. The freestream Mach number is 2.5, and direct comparison with a DNS database from our research group, as well as with experiments from the literature of adiabatic supersonic spatially turbulent boundary layers, is performed. Turbulent inflow conditions are generated via our dynamic rescaling–recycling approach, recently extended to high-speed flows. Focus is given to the assessment of the resolved Reynolds stresses. In addition, flow visualization is performed to obtain a much better insight into the physics of the flow. A weak compressibility effect is observed on thermal turbulent structures based on two-point correlations (IC vs. supersonic). The Reynolds analogy (u′ vs. t′) approximately holds for the supersonic regime, but to a lesser extent than previously observed in incompressible (IC) turbulent boundary layers, where temperature was assumed as a passive scalar. A much longer power law behavior of the mean streamwise velocity is computed in the outer region when compared to the log law at Mach 2.5. Implicit LES has shown very good performance in Mach 2.5 adiabatic flat plates in terms of the mean flow (i.e., Cf and UVD+). iLES significantly overpredicts the peak values of u′, and consequently Reynolds shear stress peaks, in the buffer layer. However, excellent agreement between the turbulence intensities and Reynolds shear stresses is accomplished in the outer region by the present iLES with respect to the external DNS database at similar Reynolds numbers.     

Heavy Metal Depuration Steps for Gracilaria chilensis in Outdoor Culture Systems

Seaweed aquaculture is affected by natural and anthropogenic stressors, which put the biomass productivity of the cultures at risk. Seaweed biomass for commercial purposes, principally in pharmaceutical and/or nutraceutical applications, needs to be free of pollutants; therefore, controlled cultures have relevance in regulating the quality of biomass. The aim of this work was to demonstrate the successful utilization of controlled outdoor cultures to remove excess heavy metal accumulation in Gracilaria chilensis, an important commercial seaweed farming model. Specifically, we designed a simple and operational heavy metal depuration protocol, utilizing seawater and tap water removal, which permitted the concentration reduction of 10 heavy metals, including As, Cu, and Cd but not Zn, from the biomass at 7 days of culture. The percentage of depuration of the heavy metals ranged from 32 to 92% at 7 days, which was maintained throughout 21 days of culture. During the culture period, the monitored physicochemical parameters (temperature, salinity, and dissolved oxygen, among others) remained stable, with an increase in the daily growth rate (DGR% d⁻¹) of the biomass recorded after 14 days of culture. Consequently, the experimental setup was successful for heavy metal depuration, which highlights the importance of controlled outdoor cultures as important tools of sustainability.     

Micro‐Raman spectroscopy and SEM/EDX applied to improve the zircon fission track method used for dating geological formations

The zircon mineral is widely studied in geochronology. In the case of the fission track method (FTM), the age is determined by the density of fission tracks at the zircon surface, which can be observed with an optical microscope after an appropriate chemical treatment (etching). The etching must be isotropic at the zircon grain surface to be used in the FTM, which leads those zircon grains whose etching is anisotropic to be discarded. The only reason for this discarding is the nonuniform morphology of the surface grain seen by optical microscopy, that is, no further physicochemical analysis is performed. In this work, combining micro‐Raman and scanning electron microscopy (SEM) to study the etching anisotropy, it was shown that zircon grains that present at least one area at the surface where the density of fission track is uniform can be used in the FTM. The micro‐Raman showed characteristic spectra of the standard zircon sample either from the areas where there are tracks or from where there are not. The only difference found was in the Raman bandwidths, which were broader for the areas with higher density of fission tracks. This suggests simply a decrease in the relative percentage of the crystalline/amorphous phases at these areas. The SEM/energy dispersive spectrometry (EDX) showed that there were no significant differences in the principal chemical composition at the areas with and without fission tracks. Copyright © 2008 John Wiley & Sons, Ltd.