Zirconium oxide complex anchored on boehmite nanoparticles as highly reusable organometallic catalyst for C–S and C–O coupling reactions

Boehmite nanoparticles were prepared by a simple and inexpensive procedure in water using commercially available materials without inert atmosphere. Then, the surface of the boehmite nanoparticles was modified using 3‐mercaptopropyltrimethoxysilane and subsequently zirconium oxide was supported on the modified surface. Zirconium oxide supported on boehmite nanoparticles (Pr.S‐ZrO@boehmite) was characterized using scanning electron microscopy, Fourier transform infrared spectroscopy, thermogravimetric analysis and inductively coupled plasma technique. The catalytic application of Pr.S‐ZrO@boehmite was studied in C–O and C–S coupling reactions for synthesis of valuable compounds such as ether and sulfide derivatives. All products were obtained in good to excellent yields and the catalyst could be recovered and reused several times without significant loss of catalytic efficiency. Furthermore, zirconium oxide is rarely used as catalyst for cross‐coupling reactions.     

Boehmite@tryptophan‐Pd nanoparticles: A new catalyst for C–C bond formation

A boehmite@tryptophan‐Pd nanoparticulate catalyst was prepared by a simple, fast and convenient route. The nanomaterial was characterized using various techniques and employed as a thermally stable catalyst for Heck, Stille and Suzuki cross‐coupling reactions. Optimized conditions for these reactions are described. The catalyst could be isolated, post‐reaction, by simple filtration and recycled for several consecutive cycles without a notable change in its activity.     

Chemoselective N-nitrosation of secondary amines under heterogeneous and mild conditions via in situ generation of HNO_2

A wide variety of secondary amines are chemoselectively subjected to N-nitrosation reaction with treatment of citric acid and NaNO2 in the presence of wet SiO2(50%,w/w)in dichloromethane at room temperatture under heterogeneous conditions.The N-nitrosation method is very simle and products can be easily isolated with good to high yields.     

Synthesis and Characterization of Co(II) Coordination Polymer with a Flexible Bidentate Ligand

Crystallography Reports - A coordination polymer, {[Co(bib)3](BF4)2}n, was prepared for the first time at room temperature via the reaction between cobalt(II) chloride and flexible linker ligand,...     

Optimizing adsorptive removal of malachite green and methyl orange dyes from simulated wastewater by Mn‐doped CuO‐Nanoparticles loaded on activated carbon using CCD‐RSM: Mechanism,regeneration, isotherm,kinetic, and thermodynamic studies

In the present work, Mn‐doped CuO‐NPs‐AC was prepared by a simple method, characterized using various techniques such as FESEM, EDX, XRD, PSD, and pH_pzc and finally used for the adsorption of malachite green (MG) and methyl orange (MO) in a number of single and binary solutions. A series of adsorption experiments were conducted to investigate and optimize the influence of various factors (such as different pH, concentration of MG and MO, adsorbent mass, and sonication time) on the simultaneous adsorption of MG and MO using response surface methodology. Under optimal conditions of pH 10, adsorbent dose of 0.02 g, MG concentration of 30 mg L^?1, MO concentration of 30 mg L^?1, and sonication time of 4.5 min at room temperature, the maximum predicted adsorption was observed to be 100.0%, for both MG and MO, showing that there is a favorable harmony between the experimental data and model predictions. The adsorption isotherm of MO and MG by Mn‐doped CuO‐NPs‐AC could be well clarified by the Langmuir model with maximum adsorption capacity of 320.69 mg g^?1 and 290.11 mg g^?1 in the single solution and 233.02 mg g^?1 and 205.53 mg g^?1 in the binary solution by 0.005 g of adsorbent mass for MG and MO, respectively. Kinetic studies also revealed that both MG and MO adsorption were better defined by the pseudo‐second order model for both solutions. In addition, the thermodynamic constant studies disclosed that the adsorption of MG and MO was likely to be influenced by a physisorption mechanism. Eventually, the reusability of the Mn‐doped CuO‐NPs‐AC after six times showed a reduction in the adsorption percentage of MG and MO.     

三溴化聚乙烯吡咯烷酮高效催化醇和酚的乙酰化反应(英文)

An efficient and versatile procedure for the acetylation of alcohols and phenols using acetic anhydride in the presence of a catalytic amount of polyvinylpolypyrrolidoniume tribromide has been successfully developed.Primary,secondary,and tertiary alcohols,as well as a selection of the phenolic compounds,have been successfully acetylated according to this procedure,with good to high yields being achieved over short reaction times.     

Schiff base complex of palladium immobilized on magnetic nanoparticles: an efficient and recyclable nanocatalyst for CC coupling reactions

A Schiff base complex of palladium anchored on Fe₃O₄ magnetic nanoparticles as an efficient and magnetically reusable nanocatalyst is reported for C? C bond formation through Heck and Suzuki reactions. The catalyst was easily recovered and reused several times without significant loss of its catalytic efficiency or palladium leaching. The magnetic nanocatalyst was characterized using Fourier transform infrared and inductively coupled plasma atomic emission spectroscopies, thermogravimetric analysis, vibrating sample magnetometry, and transmission and scanning electron microscopies. Copyright © 2016 John Wiley & Sons, Ltd.     

Synthesis and characterization of MCM-41@XA@Ni(II) as versatile and heterogeneous catalyst for efficient oxidation of sulfides and acetylation of alcohols under solvent-free conditions

Herein, Ni(II) immobilized on modified mesoporous silica MCM-41 was designed and synthesized via a facile sequential strategy. The structure of the catalyst was characterized by X-ray diffraction. The thermal property of the as-synthesized materials was studied using thermogravimetric-differential thermal analysis. The average particles size and morphology of MCM-41@XA@Ni(II) were investigated using scanning electron microscopy and transmission electron microscopy. This nanostructure catalyst was effective for the selective oxidation of sulfides and acetylation of alcohols in solvent-free conditions. The easy recyclability of the catalyst and their complete chemoselectivity toward the sulfur group of substrates in the oxidation of sulfides are important “green” attributes of this catalyst.     

The effect of quenched bond disorder on first-order phase transitions

We investigate the effect of quenched bond disorder on the two-dimensional three-color Ashkin–Teller model, which undergoes a first-order phase transition in the absence of impurities. This is one of the simplest and striking models in which quantitative numerical simulations can be carried out to investigate emergent criticality due to disorder rounding of first-order transition. Utilizing extensive cluster Monte Carlo simulations on large lattice sizes of up to 128×128$128\times 128$ spins, each of which is represented by three colors taking values ±1$\pm 1$, we show that the rounding of the first-order phase transition is an emergent criticality. We further calculate the correlation length critical exponent, ν$\nu$, and the magnetization critical exponent, β$\beta$, from finite size scaling analysis. We find that the critical exponents, ν$\nu$ and β$\beta$, change as the strength of disorder or the four-spin coupling varies, and we show that the critical exponents appear not to be in the Ising universality class. We know of no analytical approaches that can explain our non-perturbative results. However our results should inspire further work on this important problem, either numerical or analytical.