Synthesis,characterization, and antimicrobial activity of some novel poly(ether ketone)s

Low molecular weight poly(ether ketone)s were synthesized from phenol, 1,4‐phenylenedioxy diacetylchloride, chloroacetylchloride, and dichloroalkanes [1,2‐dichloroethane and dichloromethane] by a Friedel–Crafts reaction with anhydrous aluminum chloride as a catalyst and carbon disulfide as a solvent. The conditions for the preparation of the poly(ether ketone)s and the chlorine contents obtained with the Carius method were examined, and a reaction scheme for each resin was established. The molecular weights and polydispersities of the resins were obtained by gel permeation chromatography. The polyketones were characterized by IR spectroscopy. The characteristic frequencies due to different functional groups were assigned. The thermal properties of the resins were studied with thermogravimetry and differential scanning calorimetry. The characteristic temperatures of thermal degradation for the poly(ether ketone)s were evaluated with thermogravimetric analysis. The kinetic parameters for the decomposition reactions of the resins were obtained with Broido and Doyle's method, and the heats of fusion were obtained from differential scanning calorimetry thermograms. The polyketones were thermally stable up to 200 °C. All the polyketones were tested for their microbial properties against bacteria, fungi, and yeast. The effect of poly(ether ketone)s on the growth of these microorganisms was investigated, and the polyketones were found to inhibit the growth of the microorganisms to a considerable extent. © 2003 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 41: 2335–2344, 2003     

A Rapid Method for the Determination of Trace Element Impurities in Silicons Oils by ICP-MS After Microwave-Assisted Digestion

Abstract

A microwave-assisted digestion procedure has been developed for the treatment of silicone oil samples. Inductively coupled plasma mass spectrometry (ICP-MS) was used to determine the concentration level of 40 trace element impurities, like Li, Na, Mg, Al, P, Ca, Sc, Ti, V, Cr, Mn, Fe, Co, Ni, Cu, Zn, Ga, As, Se, Sr, Rb, Zr, Nb, Mo, Ag, Cd, Sn, Sb, Ba, La, Ce, Nd, Hf, W, Au, Pb, Hg, Th, Bi and U in these samples, having obtained average relative standard deviation values of 9.6%. The methodology developed has been tested by recovery studies on different natural samples spiked with known amounts of Mg, Cr, Mn, Fe, Zn and Pb at concentration levels of 10, 0.5, 5, 5, 10 and 1 μg g^?1 and recovery percentage values varies from 97 to 105 %.     

Efficient Entrapment of Dye in Hollow Silica Nanoparticles: Direct Evidence Using Fluorescence Spectroscopy

Using hollow silica nanoparticles we demonstrate a simple and highly efficient way of removing hydrophilic dye (Rhodamine B) from water by encapsulation within these hollow spheres. The hollow silica spheres were obtained by using a surfactant templated procedure. Using fluorescence spectroscopy, we also show the evidence of the dye being absorbed within the hollow core of the silica shell (which is crucial for many applications) and differentiate from the adsorption of dye on the surface of the silica shell. It was found that that up to 94 % of the hydrophilic dye could be entrapped using these hollow shells within 72 h of exposure. Fluorescence spectroscopy shows a red shift in the dye encapsulated in the hollow silica which is due to aggregation of the dye and enables us to follow quantitatively the uptake of the dye molecules by the silica shells with time. The evidence for the encapsulation of the dye in these hollow spheres was reinforced by carrying out a comparative study, using solid silica particles.

Highly Diastereoselective Synthesis of Dihydro-benzoimidazo-[1,3]-thiazines via Electro-oxidative Selenocyclization of Thioallyl Benzoimidazoles

The current methodology reveals a green and proficient electro-oxidative tandem selenocyclization of thioallyl benzoimidazoles manufacturing selenylated dihydro-benzoimidazo-thiazine derivatives. Both C−Se and C−N bond formation were achieved via this mild protocol which exhibits good functional group tolerability affording an extensive range of substrate scope up to 96% isolated yields. Complete control over the regioselective formation of the six-membered heterocycle and stereoselective construction of the contiguous stereocenters was established. The practical electrochemical method operates in an undivided cell at ambient temperature without using any metal and external chemical oxidant.     

Fluorescence resonance energy transfer from TX-100 to 3-acetyl-4-oxo-6,7-dihydro-12H-indolo-[2,3-a]quinolizine in premicellar and micellar environments

Fluorescence (Förster) resonance energy transfer (FRET) from the phenyl groups of the non-ionic triton X-100 (TX-100) micelles to a potent bioactive molecule 3-acetyl-4-oxo-6,7-dihydro-12H-indolo-[2,3-a] quinolizine (AODIQ) has been studied using steady state absorption and fluorescence techniques. High values of Stern–Volmer constants (K_SV) suggest that a long-range dipole–dipole interaction is operative for the energy transfer mechanism. From the analysis of the quenching of the donor fluorescence the energy transfer efficiency (E) has been determined in both premicellar and micellar environments. Experimental results reveal that the energy transfer process is more efficient in the micellar environment compared to the premicellar situation.     

Effect of cyclodextrin nanocavity confinement on the photophysics of a beta-carboline analogue: a spectroscopic study

Interaction of a beta-carboline based biologically active molecule, 3-acetyl-4-oxo-6,7-dihydro-12H indolo-[2,3-a] quinolizine (AODIQ), with alpha-, beta-, and gamma-cyclodextrins (CDs) in aqueous solution has been studied using steady state and time-resolved fluorescence and steady-state fluorescence anisotropy techniques. Polarity dependent intramolecular charge transfer (ICT) process is responsible for the remarkable sensitivity of this biological fluorophore to the CD environments. Upon encapsulation, the CT fluorescence exhibits hypsochromic shift along with enhancements in the fluorescence yield, fluorescence anisotropy (r), and fluorescence lifetime. The reduction in the nonradiative deactivation rate of the fluorophore within the CD nanocavities leads to an increase in both fluorescence yield and lifetime. Among the three CDs, gamma-CD shows the most spectacular confinement effect. The results establish the formation of 1:1 AODIQ:CD inclusion complexes in alpha- and beta-CDs. In aqueous gamma-CD solutions, however, depending on the concentration of the gamma-CD, formation of both 1:1 and 1:2 complexes have been revealed. Hydrodynamic radii of the 1:1 and 1:2 probe-gamma-CD supramolecular complexes have also been determined.     

Photophysics of a cationic biological photosensitizer in anionic micellar environments: combined effect of polarity and rigidity

A steady-state and time-resolved photophysical study of a cationic phenazinium dye, phenosafranin (PSF), has been investigated in well-characterized biomimetic micellar nanocavities formed by anionic surfactants of varying chain lengths, namely, sodium decyl sulfate (S(10)S), sodium dodecyl sulfate (S(12)S), and sodium tetradecyl sulfate (S(14)S). In all these micellar environments, the charge transfer fluorescence of PSF shows a large hypsochromic shift along with an enhancement in the fluorescence quantum yield as compared to that in aqueous medium. A reduction in the nonradiative deactivation rate within the hydrophobic interior of micelles led to an increase in the fluorescence yield and lifetime. The present work shows the degree of accessibility of the fluorophore toward the ionic quencher in the presence of surfactants of different surfactant chain lengths. The fluorometric and fluorescence quenching studies suggest that the fluorophore resides at the micelle-water interfacial region. The enhancements in the fluorescence anisotropy and rotational relaxation time of the probe in all the micellar environments from the pure aqueous solution suggest that the fluorophore binds in motionally restricted regions introduced by the micelles. Polarity and viscosity of the microenvironments around the probe in the micellar systems have been determined. The work has paid proper attention to the hydrophobic effect of the surfactant chain length on photophysical observations.     

Surfactant chain-length-dependent modulation of the prototropic transformation of a biological photosensitizer: norharmane in anionic micelles

A photophysical study of norharmane (NHM), an efficient cancer cell photosensitizer, has been undertaken in well-characterized biomimetic micellar nanocavities formed by anionic surfactants of varying chain length, namely, sodium decyl sulfate (S10S), sodium dodecyl sulfate (S12S), and sodium tetradecyl sulfate (S14S), using steady-state and time-resolved fluorescence spectroscopy. The effect of the hydrophobic chain length on the structural dynamism of the fluorophore has been reported. Experimental results demonstrate that the equilibrium of this dynamism is sensitive to the environment. Variation in the surfactant chain length plays an important role in promoting a specific prototropic form of the probe molecule. A striking feature of the present study is that an increase in the surfactant chain length (hydrophobicity) favors the cationic species of NHM. This has been rationalized on the basis of changes in the local pH and the aggregation number of the micelles. A fluorescence quenching study of the micelle-bound probe using ionic quencher Cu2+ corroborates this.     

Kinetics and mechanism of reaction of trans-(diaqua)(N,N′-ethylene-bis-salicylidenimine) chromium(iii) with sulfur(iv): The labilizing effect of coordinated sulfite

The reaction of trans-[Cr(Salen)(OH₂)₂]⁺ with aqueous sulfite yields trans-[Cr(Salen)(OH₂)(OSO₂(SINGLEBOND)O)]⁻ (O-bonded isomer). The rate and activation parameter data for the formation of the sulfito complex are consistent with a mechanism involving rate-limiting addition of SO₂ to the Cr^III(SINGLEBOND)OH bond. The complex ions, trans-[(OH₂)Cr(Salen)(OSO₂(SINGLEBOND)O)]⁻, and trans-[(OH)Cr(Salen)(OSO₂(SINGLEBOND)O)]²⁻, undergo reversible anation by NCS⁻, N₃⁻, imidazole, and pyridine resulting in the formation of trans-[XCr(Salen)(OSO₂(SINGLEBOND)O)]^(N+1)−(n=1 for X=N₃⁻,NCS⁻, and 0 for X=imidazole and pyridine) predominantly via dissociative interchange mechanism. The labilizing action of the coordinated sulfite on the trans-Cr^III-X bond in trans-[XCr(Salen)(OSO₂)]⁽ⁿ⁺¹⁾⁻ follows the sequence: NCS⁻pyridine ca. N₃⁻ ca. imidazole. Data analysis indicated that the coordinated sulfite has little trans activating influence. © 1998 John Wiley & Sons, Inc. Int J Chem Kinet 30: 373–384, 1998     

Manganese-catalyzed Electro-oxidative Azidation-annulation Cascade to Access Oxindoles and Quinolinones

An environmentally benign and proficient electro-oxidative tandem azidation-radical cyclization strategy is reported. Manganese-catalyzed electrochemical reaction in an undivided cell at room temperature and the use of NaN₃ as the cheapest azide source are the key features of this protocol. Using this approach, a series of oxindole and quinolinone derivatives are synthesized in high yields. The synthesized azide functionality was efficiently converted to various valuable derivatives.