Potentiometric study of the protonation and distribution equilibria of d-gluconic-delta-lactone acid in sodium perchlorate solutions at 25 degrees C and construction of a thermodynamic model

The protolytic behavior of d-gluconic-delta-lactone acid has been studied by means of automated potentiometric titrations at different ionic strengths in the range 0.1相似文献   

Role of the tautomerism of 2-azaadenine and 2-azahypoxanthine in substrate recognition by xanthine oxidase

The tautomerism of 2-azaadenine and 2-hypoxanthine has been examined in the gas phase and in aqueous solution. The tautomerism in the gas phase has been studied by means of semiempirical and ab initio quantum-mechanical computations, as well as density-functional calculations. The influence of the aqueous solvent on the relative stability between tautomers has been estimated from self-consistent reaction field calculations performed with different high-level continuum models. The results provide a detailed picture of the tautomeric preference for these purine bases. The importance of tautomerism in the substrate recognition by xanthine oxidase is discussed. Finally, the rate of oxidation of 2-azaadenine and 2- hypoxanthine by xanthine oxidase is discussed in terms of the recognition model at the enzyme active site.     

Neutron activation analysis for chromium(III) and (VI) in lixiviated liquid through a calcined chromium(VI) adsorbed hydrotalcite

Summary Electrophoresis followed by neutron activation analysis was utilized to determine chromium(III) and (VI) in mixed solutions. These solutions proceeded from Cr(VI) adsorbed hydrotalcites heated at 800 °C to partially immobilize Cr in the Mg-Al oxide solid solution. Immobilization was studied by Cr lixiviation with NaCl solutions through the heated hydrotalcites. The results have shown that Cr lixiviated was in the form of CrO₄^2- ions, mainly because some Cr(VI) was not completely reduced to Cr(III) during heating. Chromium lixiviated from HT-Cr sample, heated at 800 °C and γ-irradiated at 1000 kGys, was found, as well, in the form of CrO₄^2- ions. Although γ-irradiation increases Cr immobilization in the solid, it does not reduce completely all CrO₄^2- ions present in the solid and, therefore, some Cr is lixiviated through the solid in the form of CrO₄^2- ion.     

Insights into the phosphoryl-transfer mechanism of cAMP-dependent protein kinase from quantum chemical calculations and molecular dynamics simulations

To investigate the molecular details of the phosphoryl-transfer mechanism catalyzed by cAMP-dependent protein kinase, we performed quantum mechanical (QM) calculations on a cluster model of the active site and molecular dynamics (MD) simulations of a ternary complex of the protein with Mg(2)ATP and a 20-residue peptide substrate. Overall, our theoretical results confirm the participation of the conserved aspartic acid, Asp(166), as an acid/base catalyst in the reaction mechanism catalyzed by protein kinases. The MD simulation shows that the contact between the nucleophilic serine side chain and the carboxylate group of Asp(166) is short and dynamically stable, whereas the QM study indicates that an Asp(166)-assisted pathway is structurally and energetically feasible and is in agreement with previous experimental results.     

On-line preconcentration of inorganic mercury and methylmercury in sea-water by sorbent-extraction and total mercury determination by cold vapour atomic absorption spectrometry

A comparative study of three mercury chelate forming reagents [diethyldithiocarbamate, pyrrolidin-1-yldithioformate and diphenylthiocarbazone (dithizone)] has been carried out for the preconcentration of ultratrace amounts of inorganic mercury and methylmercury in silica C(18) minicolumns as the solid sorbent. Sample flow injection in-line sorbent extraction was coupled with continuous cold vapour atomic absorption spectrometry (CVAAS) for detection. Results showed the superiority of the carbamate type reagents over the dithizone for the on-line formation and preconcentration of the corresponding mercury chelates. Using diethyldithiocarbamate (DDC) as reagent, aqueous sample volumes of 100 ml can be preconcentrated with 100% efficiency for both inorganic mercury and methylmercury. Quantitative release of the retained DDC chelates was obtained for volumes of eluent (ethanol) of 50 microl. Following the proposed procedure, detection limits of 16 ng/l. of mercury were achieved for sample volumes of 25 ml. The relative standard deviation was +/- 3.4% at 0.5 microg/l. Hg(II) levels. The method has been successfully applied to the determination of low levels of mercury in sea-water.     

Simultaneous spectrophotometric determination of La, Ho, Mn 5-Br-PADAP complexes using multivariate calibration with partial least-squares (PLS) data evaluation

A simple and fast analytical pocedure is proposed for the simultaneous spectrophotometric determination of lanthanum, holmium and manganese in synthetic ceramics, (La(0.8-x) Hox Sr0.2 MnO3), by using the partial least-squares (PLS) method. As chromogenic agent 5-Br-PADAP [2-(5-bromo-2-pyridylazo)-5-diethylaminophenol] was used, which form colored complexes with the three elements studied. To avoid metal hydrolysis, a mixture of ethanol and Triton X-100 at pH 9.5 was used for all experiments. A set of 17 calibration solutions measured throughout the 400-700 nm wavelength range was used in the calibration step. The concentration range for Mn(II) was 1-12 x 10(-6) mol L-1, while the range for the rare earth elements La(III) and Ho(III) was 2-8 x 10(-6) mol L-1. In order to demonstrate the applicability of the proposed method, a set of artificial samples containing the three analytes in variable proportions was prepared and analyzed. The analytical results obtained were quite acceptable with relative errors not greater than 7% in most cases.     

Synthese von 4H-Pyrano[2,3-d]pyrimidinen

Summary Good yields of substituted 5-(5R-2-furyl)-4H-pyrano[2,3-d]pyrimidines4 were obtained in the reaction of 2-ethoxymethyleneamino-3-cyano-4H-pyranes2 with ammonia. Compounds2 were prepared by the condensation of the starting 2-amino-5-acetyl-3-cyano-6-methyl-4H-pyranes1 with ethyl orthoformate. Spectral properties of the bicyclic system4 in relation to compounds3 are discussed.

     

Structure of the acetone liquid-vapor interface as seen from Monte Carlo simulations

The orientational order of the molecules at the liquid-vapor interface of acetone has been investigated by computer simulation. To fully describe the orientational preferences of the acetone molecules, the bivariate joint distribution of two independent orientational parameters has been determined at different layers of the interface. The strength of the orientational ordering of the interfacial molecules has been found to be liquid-like rather than crystal-like. The obtained results have revealed that the interfacial acetone molecules have dual orientational preferences. The main symmetry axis of the molecules declines by about 50-70 degrees from the interface normal axis, pointing toward the liquid phase in both of the preferred orientations. However, the plane of the molecules in the orientation preferred on the liquid side of the interface is perpendicular to the interfacial plane, whereas the other preferred orientation, which is present on the vapor side of the interface, corresponds to the alignment obtained from this orientation by an almost 90 degrees rotation around the main symmetry axis. Because the population of the liquid side is higher than that of the vapor side of the interface, the first of the two preferred orientations is the dominant alignment over the entire interface, in good agreement with recent experimental findings (Chen, H.; Gan, W.; Wu, B. H.; Wu, D.; Zhang, Z.; Wang, H. F. Chem. Phys. Lett. 2005, 408, 284).     

Action spectroscopy and temperature diagnostics of H+ 3 by chemical probing

Infrared absorption spectroscopy of few hundred H+(3) ions trapped in a 22-pole ion trap is presented using chemical probing as a sensitive detection technique down to the single ion level. By exciting selected overtone transitions of the (v(1)=0,v(2) (l)=3(1))<--(0,0(0)) vibrational band using an external cavity diode laser an accurate diagnostics measurement of the effective translational and rotational temperatures of the trapped ions was performed. The absolute accuracy of the measured transition frequencies was improved by a factor of four compared to previous plasma spectroscopy measurements using velocity modulation [Ventrudo et al., J. Chem. Phys. 100, 6263 (1994)]. The observed buffer gas cooling conditions in the ion trap indicate how to cool trapped H+(3) ions into the lowest ortho and para rotational states. Future experiments will utilize such an internally cold ion ensemble for state-selected dissociative recombination experiments at the heavy ion storage ring Test Storage Ring (TSR).     

Determination of nonsteroidal anti-inflammatory drugs in biological fluids by automatic on-line integration of solid-phase extraction and capillary electrophoresis

A new, automatic method for the clean-up, preconcentration, separation, and quantitation of nonsteroidal anti-inflammatory drugs (NSAIDs) in biological samples (human urine and serum) using solid-phase extraction coupled on-line to capillary electrophoresis is proposed. Automatic pretreatment is carried out by using a continuous flow system operating simultaneously with the capillary electrophoresis equipment, to which it is linked via a laboratory-made mechanical arm. This integrated system is controlled by an electronic interface governed via a program developed in GWBasic. Capillary electrophoresis is conducted by using a separation buffer consisting of 20 mM NaHPO4, 20 mM beta-cyclodextrin and 50 mM SDS at pH 9.0, an applied potential of 20 kV and a temperature of 20 degrees C. The analysis time is 10 min and the detection limits were between 0.88 and 1.71 microg mL(-1). Automatic clean-up and preconcentration is accomplished by using a C-18 minicolumn and 75% methanol as eluent. The limit of detection of NSAIDs can be up to 400-fold improved when using sample clean-up. The extraction efficiency for these compounds is between 71.1 and 109.7 microg mL(-1) (RSD 2.0-7.7%) for urine samples and from 77.2 to 107.1 microg mL(-1) (RSD 3.5-7.1%) for serum samples.