Microdetermination of phenols, carboxylic acids and phenolic acids by potentiometric and visual titrations in dimethylformamide

Potentiometric titration of phenols with sodium methoxide in dimethylformamide, with a glass-calomel electrode system, is limited to monohydric phenols substituted with electron-attracting groups and dihydric phenols in which the two -OH groups are substituted in isolated benzene rings. Brilliant Orange has proved to be a suitable indicator in the titration of all types of mono- and dihydric phenols. Titan Yellow is recommended as indicator for the titration of carboxylic acids. Simultaneous visual titration of -OH and -COOH groups is also described. A detailed study with 62 structurally different compounds covering the various groups is reported, and a suitable procedure for the microdetermination of each class of these compounds with an error of +/- 0.2% absolute or less is presented.     

Reaction of some coumarin and 4,6-diaryl-2H-pyran derivatives with secondary amines

The reaction of piperidine, morpholine, piperazine or dimethylamine with several coumarins, 3-bromocoumarin, 4,6-diaryl-2H-pyran-2-ones and 3-bromo-4,6-diaryl-2H-thiopyran-2-ones gave o-hydroxycinnamic acid amides, benzofurans, open-chain δ-oxoamides and thiophene derivatives, respectively.     

Role of Surface Molecular Architecture and Energetics of Hydrogen Bonding Sites in Adsorption of Polymers and Surfactants

Hydrogen bonding is generally thought to be an ubiquitous adsorption mechanism, which often foils selective adsorption schemes. Through investigation of hydrogen bonding energy and its dependence on surface molecular architecture, it may be possible to develop new methodologies to control the adsorption of surfactants and polymeric flocculants, depressants, and dispersants used in particulate processing industries. A model system using St?ber silica spheres and polyethylene oxide, a polymer known for its ability to form hydrogen bonds, was examined. The effect of two different surface treatments of the silica particles, calcination and rehydroxylation, upon the adsorption of two polymer molecular weights was studied. The adsorption behavior was then linked to the respective surface structures via characterization of the surfaces using FTIR, NMR, and Raman techniques. In this paper role of hydrogen bonding sites and surface architecture on adsorption is discussed. Copyright 2000 Academic Press.     

Preparation of a set of selectively protected disaccharides for modular synthesis of heparan sulfate fragments: toward the synthesis of several <Emphasis Type="Italic">O</Emphasis>-sulfonated [β-D-GlcUA-(1→4)-β-D-GlcNAc]OPr types

A concise method for a stereocontrolled synthesis of a set of selectively protected disaccharides is reported. Coupling of the donor 11 onto acceptors 23 and 24, promoted by trimethylsilyl triflate-N-iodosuccinimide (TMSOTf-NIS), generated the disaccharides 25 and 26. Under typical conditions, condensation of the fully protected donor 12 onto acceptors 23 and 24 produced the disaccharides 27 and 28. The building blocks 25–28 were prepared in moderate yields having exclusive β-stereoselectivity. A unique pattern of protecting groups distinguished clearly between positions to be sulfated and functional groups remaining as free hydroxyl groups. Acetyl and/or levulinoyl esters temporarily protected the positions to be sulfated, while benzyl ethers were used for permanent protection. The anomeric positions were protected as allyl ethers, whereas the 4′-positions were masked as p-methoxybenzyl (PMB) ethers. The orthogonality of the PMB and allyl groups can then be used for further elongation of the chain by recurrent deprotection and activation steps. The hydroxyl group, OH-6, of glucosamine moieties was protected as a TBDPS ether to avoid oxidation. A five-step deprotection/sulfonation sequence was applied to the disaccharide 27 to generate the corresponding sulfated [β-D-GlcUA-2-OSO₃Na-(1→4)-β-D-Glc pNAc]-(1→O-Pro) 34.     

An efficient procedure for the synthesis of coumarin derivatives using TiCl4 as catalyst under solvent-free conditions

The ability of titanium(IV) chloride as a catalyst to promote the Pechmann condensation reaction with a range of phenols and β-keto esters is described.The reaction was carried out by addition of TiCl₄ to a mixture of the phenol and the β-keto ester with thorough stirring in the absence of a solvent and represents an improvement on the classical Pechmann conditions. The yields of coumarins obtained via this novel protocol were significantly higher than those using the conventional method and the reaction duration was reduced to a few minutes or even a few seconds.     

Thermodynamic and lfer studies for the oxidation of anilines by the periodate ion

The various thermodynamic parameters for the periodate oxidation of six anilines, viz. aniline, p-chloroaniline, p-ethoxyaniline, o- and p-methoxyanilines and p-methylaniline have been reported and discussed. The validity of the isokinetic relationship and various linear free energy relationships (LFERs) have been tested and discussed. An attempt has been made to correlate these findings with the mechanism operative in these reactions.     

Optical sensor for sulfur dioxide based on fluorescence quenching

A series of potential indicator dyes is evaluated for use in the development of optical sensors for measuring sulfur dioxide in gaseous samples. Rhodamine B isothiocyanate is selected on the basis of relative sensitivity to dynamic quenching by sulfur dioxide and oxygen. A solid-state fluorometer is described for monitoring the sulfur dioxide induced fluorescence quenching of sensing membranes composed of silicone and rhodamine B isothiocyanate. A modulated blue LED is coupled with the lock-in detection of a photodiode detector to provide high signal-to-noise ratios. The limit of detection is 0.114+/-0.009% for sulfur dioxide in a carrier stream of nitrogen gas. Selectivity measurements indicate no interference from several common gases (HCl, NH(3), NO, and CO(2)). Oxygen alters the sensor response when comparing signals for sulfur dioxide in 0, 20 and 100% oxygen environments.     

Atomic absorption spectrometric and potentiometric microdetermination of the nitro and nitroso groups in organic compounds

New simple, rapid, accurate, and selective methods are described for microdetermination of the nitro and nitroso groups in organic compounds. These are based on reduction with cadmium metal and 0.05 M HCl whereby 6 and 4 equivalents of the cadmium ions are released per nitro and nitroso groups, respectively. The cadmium ions are measured by atomic absorption spectrometry at 228.8 nm, potentiometrically by titration with EDTA using the cadmium ion selective electrode, and visually by EDTA titration using Eriochrome Black T indicator. Results with an average recovery of 98% and a mean standard deviation of 1.3% are obtainable and no interferences are caused by many nitrogen, oxygen, and sulfur functional groups.     

A simplified sampling technique for use with the Weisz ring oven: application to qualitative analysis of some gold and silver alloys

Up to 100 microg of sample can be collected from gold or silver alloys by rubbing the specimen with the ground hemispherical tip of a 4-mm Pyrex glass rod. Gold alloys are then dissolved in potassium cyanide solution containing hydrogen peroxide; silver alloys are exposed to vapours of nitric acid. Procedures for transfer, ring oven separation and identification of alloy constituents in the sample solutions are described.     

Thermal analysis of pharmaceutical compounds

Some sulphonamides are evaluated by means of thermal analysis. Use is made of their characteristic endothermic DTA peaks (melting peaks), where the area changes linearly with variations in the amount of sulphonamides. The method is suitable for the determination of 30–100 mg of sulphathiazole, sulphisomidine, sulphaguanidine, sulphacetamide sodium and sulphamethoxypyridazine with reasonable accuracy. As for sulphisoxazole, two peaks are used for its determination: an endothermic one to determine 30–100 mg, and an exothermic one to determine 6–30 mg.

---

Zusammenfassung Einige Sulphonamide wurden durch thermische Analyse bestimmt, wobei von der linearen Abhängigkeit der Fläche der charakteristischen endothermen DTA-Peaks (Schmelzpeaks) von der Menge der Sulphonamide Gebrauch gemacht wurde. Mit der Methode können 30–100 mg Sulphathiazol, Sulphisoimidin, Sulphaguanidin, Natrium-Sulphacetamid und Sulphamethoxypyridazin mit ausreichender Genauigkeit bestimmt werden. Bei der Bestimmung von Sulphisooxazol wurde ein endothermer Peak für Mengen von 30–100 mg und ein exothermer für geringere Mengen von 6–30 mg herangezogen.

---

. - ( ), . 30–100 , , , . , — 30 100 , — 6 30 .