Spectrophotometric and AAS determination of trace amounts of cobalt after preconcentration by using alpha-benzilmonoxime-microcrystalline naphthalene.

The formed cobalt-a-benzilmonoxime complex was adsorbed onto microcrystalline naphthalene. Then it was determined by zero and first derivative spectrophotometry and by atomic absorption spectrophotometry (AAS) after dissolving into chloroform and methylisobutylketone (MIBK), respectively. Under optimum conditions, cobalt in the range of 1.0 - 20.0, 0.4 - 30.0 and 2.5 - 50.0 microg could be determined by spectrophotometry, first derivative spectrophotometry and AAS method, respectively. By the method, a preconcentration factor equal to approximately 30 for cobalt was obtained. The effect of diverse ions on the determination of 5.0 microg cobalt was also studied. The method was successfully applied to some pharmaceuticals and synthetic alloy samples.     

Colossal magnetoresistance manganites: A new approach

Manganites of the LA_1−x Ca _x MnO₃ family show a variety of new and poorly understood electronic, magnetic and structural effects. Here we outline a new approach recently proposed by us, where we argue that due to strong Jahn-Teller (JT) coupling with phonons the twofold degeneratee _g states at the Mn sites dynamically reorganize themselves into localised, JT polaronsl with exponentially small inter-site hopping, and band-like, nonpolaronic statesb, leading to anew 2-band model for manganites which includes strong Coulomb and Hund’s couplings. We also discuss some results from a dynamical mean-field theory treatment of the model which explains quantitatively a wide variety of experimental results, including insulator-metal transitions and CMR, in terms of the influence of physical conditions on the relative energies and occupation of thel andb states. We argue that this microscopic coexistence of the two types of electronic states, and their relative occupation and spatial correlation is the key to manganite physics. Dedicated to Professor C N R Rao on his 70th birthday     

Spectrophotometric determination of hydrazines withperi-naphthindan-2,3,4-trione hydrate

Summary A new micromethod for spectrophotometric determination of hydrazine compounds is described. It is based on a reaction withperi-naphthindan-2,3,4-trione hydrate at pH 2.5 to give a red precipitate of dihydroxy-peri-naphthindenone which is dissolved in methanol and measured at 460 nm. The results obtained show an average recovery of 99.8 %, the precision being ± 1 %.

---

Zusammenfassung Eine neue Mikromethode zur spektrophotometrischen Bestimmung von Hydrazinverbindungen wurde beschrieben. Sie beruht auf der Reaktion mit peri-Naphthindan-2,3,4-trion-hydrat bei pH 2,5, wobei ein roter Niederschlag von Dihydroxy-peri-naphthindenon entsteht, der in Methanol gelöst und bei 460 nm gemessen wird. 99,8% Substanz werden wiedergefunden, die Genauigkeit beträgt ±1%.

     

A simplified sampling technique for use with the Weisz ring oven: application to qualitative analysis of some gold and silver alloys

Up to 100 microg of sample can be collected from gold or silver alloys by rubbing the specimen with the ground hemispherical tip of a 4-mm Pyrex glass rod. Gold alloys are then dissolved in potassium cyanide solution containing hydrogen peroxide; silver alloys are exposed to vapours of nitric acid. Procedures for transfer, ring oven separation and identification of alloy constituents in the sample solutions are described.     

Microdetermination of chlorine and bromine in some organic compounds by ion-selective electrodes

Summary The solid state ion-selective chloride and bromide electrodes are used for the microdetermination of chlorine and bromine in organic compounds. After combustion in an oxygen-filled flask, potentiometric titration with silver nitrate at pH 5–7 in presence of 50% dioxan is carried out. Results accurate to ±0.3% absolute are obtained with some partially and highly halogenated compounds.

---

Mikrobestimmung von Chlor und Brom in einigen organischen Verbindungen mit Hilfe von ionenselektiven Elektroden

Zusammenfassung Chlorid- und bromidselektive Festkörperelektroden wurden zur Chlor- und Brombestimmung in teilweise bzw. hochhalogenierten organischen Verbindungen benutzt. Nach Verbrennung im Sauerstoffkolben erfolgt eine potentiometrische Titration mit Silbernitrat bei pH 5–7 in Gegenwart von 50% Dioxan. Die erhaltenen Ergebnisse sind auf ±0,3 % genau.

     

Synergism in the solvent extraction of samarium by thenoyltrifluoroacetone and triphenyl or trioctyl phosphine oxide mixture

Synergistic extraction of samarium with TTA(HA) and TPPO or TOPO (B) mixtures were investigated. The extracted complex was proved to have the general formula SmA₃ · 2B. A graphical determination for the formation constants of these complexes gave the values 3.9 × 10¹³ and 8.2 × 10¹⁰ for SmA₃ · 2TOPO and SmA₃ · 2TPPO in benzene, respectively.     

Microdetermination of the fluoride ion using an amplification reaction

Summary A new simple, rapid and accurate amplification micro method for fluoride determination is described. It is based on the reaction between the sparingly soluble calcium iodate and the fluoride ion. After adding isopropyl alcohol to the solution, so that its final concentration is 65%, and filtering, an equivalent amount of the iodate is obtained. The latter is titrated iodometrically resulting in a six-fold amplification of the titre. The method is reproducible over a range from 0.4–8 mg fluoride ion. The mean recovery is 99.69%, after applying a correction factor due to potassium iodate solubility.

---

Zusammenfassung Ein Multiplikationsverfahren zur Mikrobestimmung von Fluorid wurde beschrieben. Es beruht auf der Umsetzung zwischen dem schlecht löslichen Calciumjodat und Fluorid. Nach Zusatz von i-Propylalkohol, bis die Lösung 65% davon enthält, wird filtriert. Die äquivalente Jodatmenge wird jodometrisch titriert. Zwischen 0,4 und 8 mg Fluorid sind die Ergebnisse reproduzierbar. Bei Anwendung eines Korrekturfaktors wegen der Löslichkeit von Kaliumjodat wurden 99,69% Fluorid wieder gefunden.

     

Conductivity of carbon black-loaded styrene–butadiene rubber

Styrene–butadiene rubber (SBR) charged with 50 phr of HAF carbon black has been found to show a positive temperature coefficient of resistivity close to 0.07/°C at 27°C. Beyond a point (75°C) of minimum conductivity, however, it behaves as a normal noncrystalline semiconductor with a resistivity which decreases with rise of temperature with an activation energy of 0.56 eV. Blending the composition with poly(vinyl chloride) (PVC) shifts the minimum towards lower temperatures. The descending branch of the conductivity versus reciprocal absolute temperature characteristic is probably associated with thermal expansion of tunnelling paths separating the conducting carbon particles.     

Kinetics and mechanism of reaction between mercuric bromide and silver iodide in solid state

Kinetics and mechanism of the reaction between mercuric bromide and silver iodide were studied in the solid state. It has been established that HgBr₂ reacts via the gaseous state and that the reaction proceeds through counter diffusion of Ag⁺ and Hg²⁺. Thermal and conductivity measurements indicate that the reaction is multistep. X-ray and chemical analyses show that HgBr₂ and AgI mixed in different molar ratios give rise to different products. The data for the lateral diffusion fitted the equation X_iⁿ = kt, where X_i is the thickness of the product layer at time t, and n and k are constants. Evidence for the formation of solid solutions between reactant and product phases is reported.