Efficient Piezoelectric Energy Harvesting from a Discrete Hybrid Bismuth Bromide Ferroelectric Templated by Phosphonium Cation

Bismuth containing hybrid molecular ferroelectrics are receiving tremendous attention in recent years owing to their stable and non-toxic composition. However, these perovskite-like structures are primarily limited to ammonium cations. Herein, we report a new phosphonium based discrete perovskite-like hybrid ferroelectric with a formula [Me(Ph)₃P]₃[Bi₂Br₉] ( MTPBB ) and its mechanical energy harvesting capability. The Polarization-Electric field (P-E) measurements resulted in a well-defined ferroelectric hysteresis loop with a remnant polarization value of 2.1 μC cm⁻². Piezoresponse force microscopy experiments enabled visualization of the ferroelectric domain structure and evaluation of the piezoelectric strain coefficient (d₃₃) for an MTPBB single crystal and thin film sample. Furthermore, flexible devices incorporating MTPBB in polydimethylsiloxane (PDMS) matrix at various concentrations were fabricated and explored for their mechanical energy harvesting properties. The champion device with 20 wt % of MTPBB in PDMS rendered a maximum peak-to-peak open-circuit voltage of 22.9 V and a maximum power density of 7 μW cm⁻² at an optimal load of 4 MΩ. Moreover, the potential of MTPBB -based devices in low power electronics was demonstrated by storing the harvested energy in various electrolytic capacitors.     

Enantioselective LC–ESI–MS/MS method for quantitation of (−)-lumefantrine and (+)-lumefantrine in mice plasma and application to a pharmacokinetic study

We developed and validated a simple, sensitive, selective, and reliable LC–MS/MS–ESI method for the direct quantitation of lumefantrine (LFN) enantiomers [(−)-LFN and (+)-LFN] in mice plasma as per regulatory guideline. LFN enantiomers and carbamazepine (internal standard) were extracted from mice plasma using Strata X SPE (solid-phase extraction) cartridges. Good resolution between enantiomers was achieved on a Chiralpak IA-3 column using an isocratic mobile phase (0.1% of diethyl amine in methanol), which was delivered at a flow rate of 0.8 mL/min. Detection and quantitation were performed using multiple reaction monitoring mode following the transitions m/z 530.27 → 512.30 and 237.00 → 194.00 for LFN enantiomers and the internal standard, respectively, in the positive-ionization mode. The proposed method provided accurate and reproducible results over the linearity range of 2.39–895 ng/mL for each enantiomer. The intra- and inter-day precisions were in the range of 1.03–6.14 and 6.36–8.70 and 2.03–4.88 and 5.82–11.5 for (−)-LFN and (+)-LFN, respectively. Both (−)-LFN and (+)-LFN were found to be stable under different stability conditions. The method was successfully used to delineate stereoselective pharmacokinetics of LFN enantiomers in mice after an oral administration of rac-LFN (20 mg/kg). The pharmacokinetic results indicated that the disposition of LFN enantiomers was stereoselective in mice.     

Validated LC–MS/MS method for quantitation of a selective JAK1 inhibitor,filgotinib in rat plasma,and its application to a pharmacokinetic study in rats

Filgotinib is a selective JAK1 (Janus kinase) inhibitor, filed in Japan for the treatment of rheumatoid arthritis. In this paper, we report a validated liquid chromatography coupled with tandem mass spectrometry for the quantification of filgotinib in rat plasma using tofacitinib as an internal standard (IS) as per the Food and Drug Administration regulatory guidelines. Filgotinib and the IS were extracted from rat plasma using ethyl acetate as an extraction solvent and chromatographed using an isocratic mobile phase (0.2% formic acid:acetonitrile; 20:80, v/v) at a flow rate of 0.9 mL/min on a Gemini C₁₈ column. Filgotinib and the IS were eluted at ~1.31 and 0.89 min, respectively. The MS/MS ion transitions monitored were m/z 426.3 → 291.3 and m/z 313.2 → 149.2 for filgotinib and the IS, respectively. The calibration range was 0.78–1924 ng/mL. No matrix effect and carryover were observed. Intra- and inter-day accuracies and precisions were within the acceptance range. Filgotinib was stable for three freeze–thaw cycles: on bench-top up to 6 h, in an autosampler up to 21 h, and at −80 ° C for 1 month. This novel method has been applied to a pharmacokinetic study in rats.     

Selective epitaxy and lateral overgrowth of 3C-SiC on Si – A review

This review article attempts to present a comprehensive picture of the progress in selective epitaxial growth (SEG) of cubic silicon carbide (3C-SiC) to make it a cheap and practical material for high temperature and high power, high frequency and MEMS (Micro Electromechanical Systems) applications. Selective epitaxial growth followed by epitaxial lateral overgrowth (ELO) is a suitable approach to minimize the interfacial defects and other planar defects in case of thin film growth. Different techniques of SEG and its application to Si, GaAs and III–V nitrides are reviewed briefly in the first section of this article. Various SEG techniques like epitaxial lateral overgrowth, pyramidal growth and pendeo epitaxial growth, etc. have been discussed extensively for growing 3C-SiC on Si, together with the characterization of the grown films. The influence of various experimental parameters such as temperature of growth, choice of mask material, influence of an etchant, pattern shape and size, etc. is also discussed. On the basis of these data, it is believed that SEG and related techniques are a promising approach for heteroepitaxial growth of 3C-SiC films useful for devices and MEMS applications.     

Ab initio studies of properties of small potassium clusters

We have studied the properties of various isomers of potassium clusters containing even number of atoms ranging from 2 to 20 at the ab initio level. The geometry optimization calculations of the isomers of each cluster are performed by using all-electron density functional theory with gradient corrected exchange-correlation functional. Using the optimized geometries of different isomers we investigate the evolution of binding energy, ionization potential, and static polarizability with the increasing size of the clusters. The polarizabilities are calculated by employing M?ller-Plesset perturbation theory and time-dependent density functional theory. The polarizabilities of dimer and tetramer are also calculated by employing large basis set coupled cluster theory with single and double excitations and perturbative triple excitations. The time-dependent density functional theory calculations of polarizabilities are carried out with two different exchange-correlation potentials: (i) an asymptotically correct model potential and (ii) within the local density approximation. A systematic comparison with the other available theoretical and experimental data for various properties of small potassium clusters mentioned above has been performed. These comparisons reveal that both the binding energy and the ionization potential obtained with gradient-corrected potential match quite well with the already published data. Similarly, the polarizabilities obtained with M?ller-Plesset perturbation theory and with model potential are quite close to each other and also close to experimental data.     

Probing Electronic Symmetry Reduction during Charge Migration via Time-Resolved X-Ray Diffraction

The present work focuses on probing ultrafast charge migration after symmetry-breaking excitation using ultrashort laser pulses. LiCN is chosen as prototypical system because it can be oriented in the laboratory frame and it possesses optically-accessible charge transfer states at low energies. The charge migration is simulated within the hybrid time-dependent density functional theory/configuration interaction framework. Time-resolved electronic current densities and simulated time-resolved x-ray diffraction signals are used to unravel the mechanism of charge migration. Our simulations demonstrate that specific choices of laser polarization lead to a control over the symmetry of the induced charge migration. Moreover, time-resolved x-ray diffraction signals are shown to encode transient symmetry reduction at intermediate times.     

Blending chitosan with polycaprolactone: porous scaffolds and toxicity

The preparation and characterization of porous scaffolds from chitosan-PCL blends by freeze extraction, freeze gelation and freeze drying is reported. Using freeze extraction, stable structures were obtained only from PCL, but these were not porous. No stable scaffolds were obtained using the freeze gelation process. Stable scaffolds of chitosan/PCL mixtures could not be obtained using 77% acetic acid by any of these techniques. With 25% aqueous acetic acid, stable scaffolds of chitosan/PCL mixtures were obtained by the freeze drying technique. The stability and pore morphology of freeze dried scaffolds were dependent on the relative mass ratio of chitosan and PCL. A chorioallantoic membrane assay showed that formed 3D chitosan/PCL mixtures were not toxic to vasculature.