The effect of gas injection on a thermal argon plasma flow in a water-cooled tube

The effect of gas injection on an atmospheric thermal argon plasma flow in a water-cooled tube was investigated experimentally and numerically. The injection gas is argon, helium, or nitrogen. The static pressure with helium injection increases greatly because of its high thermal conductivity, while little increase occurs for nitrogen injection because of the dissociation. The increasing rate of the static pressure depends on the ratio of the momentum term to the viscosity term. The heat flux to the tube wall with gas injection changes less than that without injection. The numerical results showed variations similar to the experimental ones.     

High-molecular-weight poly(p-phenyleneterephthalamide) by the direct polycondensation reaction with triphenyl phosphite

Poly(p-phenyleneterephthalamide) of high molecular weight was obtained when the polycondensation of terephthalic acid and p-phenylenediamine was carried out in N-methylpyrrolidone (NMP) that contained dissolved CaCl₂ and LiCl in the presence of pyridine. The molecular weight of the polymer obtained varied with the amount of pyridine relative to the metal salts and with the molar ratios of CaCl₂ to LiCl, the maximum η_inh value of 4.5 being obtained under the conditions Py/(CaCl₂ + LiCl) ≈ 2.5 (mol/mol), CaCl₂/LiCl ≈ 1.2 (mol/mol), and LiCl + CaCl₂ ≈ 4 g. Among the solvents tested, NMP was significantly effective for the reaction. Polycondensations of several combinations of other dicarboxylic acids and diamines were carried out with limited success.     

Synthesis of isoxazolo[2,3-a]quinoxalines and pyrrolo[1,2-a]quinoxalines by 1,3-dipolar cycloaddition reaction

The isoxazolo[2,3-a]quinoxalines 11a,b and pyrrolo[1,2-a]quinoxalines 12a,b were selectively synthesized from the 2-substituted 6-chloroquinoxaline 4-oxides 10a,b . The pyrrolo[1,2-a]quinoxalines 12a,b were clarified to be produced by the ring transformation of the isoxazolo[2,3-a]quinoxalines 11a,b . The pyrrolo[1,2-a]quinoxalines 14a,b were obtained from both 2,6-dichloroquinoxaline 4-oxide 9 and compounds 12a,b .     

Formation of a new crystalline silicate structure by grafting dialkoxysilyl groups on layered octosilicate

Dialkoxydichlorosilanes ((RO)2SiCl2, R = alkyl) react almost completely with interlayer silanol groups in a layered silicate octosilicate to create a new crystalline silicate structure consisting of new five-membered rings arranged regularly on both sides of the silicate layers. The introduction of dialkoxysilyl groups to the interlamellar region of layered silicates with regular reaction sites provides a new methodology for the design and construction of novel crystalline silicate frameworks by a soft chemical route.     

Molecular numbers in core and shell: structural dependence of reactivity of alkylcarboxylate-stabilized silver nanoparticles

Spectroscopic, chemical, thermal, and voltammetric analyses on six kinds of alkylcarboxylate-stabilized silver nanoparticles 4.7 nm in diameter were carried out with an aim to reveal the effect of alkylcarboxylates on the optical, thermal, geometric, and electrochemical properties of the nanoparticles. These nanoparticles are composed of silver atoms and silver alkylcarboxylates having even numbers, m, of carbon atoms from 8 to 18. As a measure of the structure of the nanoparticles, the ratio of the number of silver atoms (nAg) to that of alkylcarboxylates (ns) per nanoparticle was evaluated by means of titration through chemical oxidation, voltammetric currents, and thermal gravimetric analysis. It increased with an increase in m and ranged from 1.3 to 9.8. Properties of the nanoparticle have been exhibited in absorbance of the UV-vis spectra at the point of the proportionality to n(Ag), voltammetric currents of which values were close to the theoretical values at the diffusion of particle itself, and the m-independent kinetic energy of the thermal decomposition and the overpotential of the reduction. They are not observed for the composed species, that is, silver atoms and silver alkylcarboxylate molecules.     

Synthesis of enantiopure 1,2-diamine attached to cross-linked polystyrene and its application to an insoluble catalyst for asymmetric hydrogenation

A novel enantiopure 1,2-diamine (5) having two phenolic hydroxy groups was attached into chloromethylated polystyrene through benzyl ether linkage, which was used as a chiral ligand of the catalyst in asymmetric hydrogenation of acetophenone.     

High enantioselectivity in rhodium-catalyzed allylic alkylation of 1-substituted 2-propenyl acetates

[reaction: see text] Rhodium-catalyzed asymmetric allylic alkylation of 1-substituted 2-propenyl acetates with dimethyl malonate proceeded with high enantioselectivity in the presence of cesium carbonate as a base and a rhodium catalyst generated from Rh(dpm)(C(2)H(4))(2) (dpm = dipivaloylmethanato) and a chiral phosphino-oxazoline whose basic skeleton is axially chiral binaphthyl to give branch alkylation products in greater than 90% ee.     

Reverse zymography using fluorogenic substrates for protease inhibitor detection

A novel, sensitive method for detecting protease inhibitors by using fluorescent protease substrates in gels is described. The protease inhibitors were separated on sodium dodecyl sulfate (SDS)-polyacrylamide gels containing a copolymerized peptide substrate, namely 4-methyl-coumaryl-7-amide (MCA). As the incorporated substrates in the gel, Boc-Phe Ser-Arg-MCA was used for trypsin, Suc-Ala-Ala-Pro-Phe-MCA for alpha-chymotrypsin, and Z-Phe-Arg-MCA for papain. After electrophoresis, washing and incubating the gel with the target protease solutions allowed the substrate to be cleaved by the protease, and the release of the fluorescent 7 amino-4 methyl-coumarin (AMC), which was detected under a UV transilluminator. The uncleaved peptide-MCA substrate remained where the inhibitors were present, and was visualized as dark blue bands on the light-green fluorescent background gel. This new method offers several advantages over other previous methods including: (i) greatly increased sensitivity can be achieved in a shorter period of time, which may be useful for discovering new protease inhibitors in small amounts of crude material; (ii) the procedure is quite simple and quick since the incubation period is very short and no time is needed for staining and destaining steps; (iii) since these probes using substrate specificity/target proteases, they are excellent tools for detection and discrimination of unknown protease inhibitors for various target proteases.     

Living cationic ring-opening polymerization by water-stable initiator: synthesis of a well-defined optically active polythiourethane

Living cationic ring-opening polymerization under air and water was achieved using a well-defined water-resistant cationic initiator in dichloromethane without purification at ambient temperature.     

m-Diethynylbenzene macrocycles: syntheses and self-association behavior in solution

m-Diethynylbenzene macrocycles (DBMs), buta-1,3-diyne-bridged [4(n)]metacyclophanes, have been synthesized and their self-association behaviors in solution were investigated. Cyclic tetramers, hexamers, and octamers of DBMs having exo-annular octyl, hexadecyl, and 3,6,9-trioxadecyl ester groups were prepared by intermolecular oxidative coupling of dimer units or intramolecular cyclization of the corresponding open-chain oligomers. The aggregation properties were investigated by two methods, the (1)H NMR spectra and the vapor pressure osmometry (VPO). Although some discrepancies were observed between the association constants obtained from the two methods, the qualitative view was consistent with each other. The analysis of self-aggregation by VPO revealed unique aggregation behavior of DBMs in acetone and toluene, which was not elucidated by the NMR method. Namely, the association constants for infinite association are several times larger than the dimerization constant, suggesting that the aggregation is enhanced by the formation of dimers (a nucleation mechanism). In polar solvents, DBMs aggregate more strongly than in chloroform due to the solvophobic interactions between the macrocyclic framework and the solvents. Moreover, DBMs self-associate in aromatic solvents such as toluene and o-xylene more readily than in chloroform. In particular, the hexameric DBM having a large macrocyclic cavity exhibits extremely large association constants in aromatic solvents. By comparing the aggregation properties of DBMs with the corresponding acyclic oligomers, the effect of the macrocyclic structure on the aggregation propensity was clarified. Finally, it turned out that DBMs tend to aggregate more readily than the corresponding phenylacetylene macrocycles, acetylene-bridged [2(n)]metacyclophanes, owing to the withdrawal of the electron density from the aromatic rings by the butadiyne linkages which facilitates pi-pi stacking interactions.