Extraction of U(VI) by cyanex-272

Extraction of U(VI) from HNO₃, HCl and HClO₄ media using cyanex-272 (bis[2,4,4 trimethyl pentyl] phosphinic acid)/n-dodecane has been carried out. In the case of HNO₃ and HClO₄ media, the distribution ratio (D) value first decreases and then increases, whereas from HCl medium it first decreases and then remains constant with increase in H⁺ ion concentration. At lower acidities, U(VI) was extracted as UO₂(HA₂)₂ by an ion exchange mechanism, whereas at higher acidities as UO₂(NO₃)₂ ^.2(H₂A₂) following a solvation mechanism. The D for U(VI) by cyanex-272, PC-88A and DEHPA at low acidities follows the order cyanex-272 > PC-88A > DEHPA. Also, cyanex-272 was found to extract U(VI) more efficiently than TBP at 2M HNO₃. The effect of diluents on the extraction of U(VI) by cyanex-272 followed the order cyclohexane > n-dodecane > CCl₄ > benzene. The loading of U(VI) into cyanex-272/n-dodecane from 2M HNO₃ has shown that at saturation point, cyanex-272 was 78% loaded. No third phase was observed at the saturation level. The stripping of U(VI) from the loaded organic phase was not possible with water, it was poor with acetic acid and sodium acetate but quantitative with oxalic acid, ammonium carbonate and sodium carbonate.     

Recovery of plutonium and americium from laboratory acidic waste solutions using tri-n-octylamine and octylphenyl-N-N- diisobutylcarbamoylmethylphosphine oxide

Plutonium from acidic waste solutions has been recovered quantitatively using tri-n-octylamine (TnOA) in xylene and americium using a mixture of octylphenyl-N-N- diisobutylcarbamoylmethylphosphine oxide (CMPO) and TBP in dodecane by extraction and extraction chromatographic methods. The Pu ( IV ) TnOA species extracted into the organic phase from higher nitric acid concentrations has been confirmed as (R(3)NH)(2)Pu(NO(3))(6) (where R(3)N = TnOA by employing slope analysis as well as spectrophotometric studies.     

Liquid-liquid extraction of trivalent actinides and lanthanides with 1-phenyl-3-methyl-4- trifluoroacetyl pyrazolone-5

Extraction of the trivalent actinides Am, Cm and Cf and lanthanides Eu, Tb, Tm and Lu has been studied with 1-phenyl-3-methyl-4-trifluoroacetyl pyrazolone- 5(HPMTFP) in chloroform and benzene. The formation of a self-adduct species M(PMTFP)₃·HPMTFP has been observed with Am, Cm and Eu but only the chelate species M(PMTFP)₃ with Cf, Tb, Tm and Lu. The reasons for the formation of a self-adduct species with lighter actinides and lanthanides and not with the heavier ones of the pyrazolones have been discussed.     

Remote Raman and fluorescence studies of mineral samples

In the present study, we investigated remote laser-induced fluorescence (LIF), at a distance of 4.8 m, of a variety of natural minerals and rocks, and Hawaiian Ti (Cordyline terminalis) plant leaves. These minerals included calcite cleavage, calcite onex and calcite travertine, gypsum, fluorapatite, Dover flint and chalk, chalcedony and nephelene syenite, and rubies containing rock. Pulsed laser excitation of the samples at 355 and 266 nm often resulted in strong fluorescence. The LIF bands in the violet-blue region at approximately 413 and approximately 437 nm were observed only in the spectrum of calcite cleavage. The green LIF bands with band maxima in the narrow range of approximately 501-504 nm were observed in the spectra of all the minerals with the exception of the nephelene syenite and ruby rocks. The LIF red bands were observed in the range approximately 685-711 nm in all samples. Excitation with 532 nm wavelength laser gave broad but relatively low fluorescence background in the low-frequency region of the Raman spectra of these minerals. One microsecond signal gating was effective in removing nearly all background fluorescence (with peak at approximately 610 nm) from calcite cleavage Raman spectra, indicating that the fluorescence was probably from long-lifetime inorganic phosphorescence.     

Chemical separation and inductively coupled plasma–atomic emission spectrometric determination of seventeen trace metals in thorium oxide matrix using a novel extractant – Cyanex-923

Comprehensive studies have been carried out on the extraction behaviour of thorium matrix vis-a-vis 17 trace metallic elements using a novel extractant viz. Cyanex-923. The near total extraction of thorium and quantitative separation of these metals has been established using inductively coupled argon plasma–atomic emission spectrometry (ICP–AES). The recovery of few representative elements has been confirmed by radio-active tracer studies. The studies carried out here have enabled determination of μg/l amounts of all analyte elements with a precision of better than 1% RSD with prior chemical separation from as low as 1 g thorium sample in just five chemical extractions.     

Extraction of actinides and fission products by octyl(phenyl)-N,N-diisobutylcarbamoylmethyl-phosphine oxide from nitric acid media

Extraction of promethium(III), uranium(VI), plutonium(IV), americium(III), zirconium(IV), ruthenium(III), iron(III) and palladium(II) has been carried out with a mixture of octyl(phenyl)-N,N-diisobutylcarbamoylmethylphosphine oxide (CMPO) and tributyl phosphate (TBP) in dodecane. The effects of nitric acid, TBP and CMPO concentrations on the extraction of these metal ions have been studied. The nature of the species of the above metal ions extracted into the organic phase has been suggested.     

Pulsed remote Raman system for daytime measurements of mineral spectra

A remote Raman system has been developed utilizing a 532nm pulsed laser and gated intensified charged couple device (ICCD) detector in the oblique geometry. When the system is set for 50m sample distance it is capable of measuring Raman spectra of minerals located at distances in the range of 10-65m from the telescope. Both daytime and nighttime operations are feasible and the spectra of minerals can be measured in a short period of time, of the order of a few seconds. In oblique geometry, measured sampling depth is more than 30m, during which the system maintains very high performance without any adjustments. Much longer sampling depth (0.1-120m) has been observed when the system is configured in the coaxial geometry. Clear advantages of using a gated detection mode over the continuous (CW) mode of operation in reducing the background signal and eliminating long-lived fluorescence signals from the Raman spectra are presented. The performance of the pulsed Raman system is demonstrated by measuring spectra of Raman standards including benzene (C(6)H(6)) and naphthalene (C(10)H(8)), a low Raman cross section silicate mineral muscovite (KAl(2)(Si(3)Al)O(10)(OH)(2)), and a medium Raman cross section mineral calcite (CaCO(3)).     

Iron(III) complexes of a tetradentate tripodal ligand N,N′,N″-tris (2-benzimidazolyl-methyl)amine

Summary Fe^III complexes of a tetradentate ligand with pendant benzimidazolyl groups have been synthesized and characterized. Room temperature Mössbauer spectra depict a quadruple split doublet in the case of NO _inf3 ^p– as co-ligand, while a nearly symmetrical one line spectrum is obtained for complexes with Cl^–as co-ligand. The isomer shift values are towards the lower end of the range found for other high spin Fe^III complexes. ¹H-n.m.r. spectra of the complexes reveal relatively broad linewidths with large isotropic shifts. Paramagnetically shifted resonances are observed in the range of –10.0–+70.0 p.p.m.Author to whom all correspondence should be directed.     

Direct photometric determination of cobalt(II) with N-methylaminothioformyl-N'-phenylhydroxylamine

N-Methylaminothioformyl-N'-phenylhydroxylamine forms a 1:2 (metal:ligand) greenish yellow complex with cobalt(II). This complex has maximum absorption at 470 nm with a molar absorptivity of 1.65 x 10(4) 1.mole(-1).cm(-1). Beer's law is obeyed over the concentration range 6 x 10(-6)-6 x 10(-5)M. The effect of diverse ions is described.