Engineering of highly conductive and mesoporous ZrV2O7: a cathode material for lithium secondary batteries

Journal of Solid State Electrochemistry - The performance of the cathode materials can be enhanced significantly by manipulating the surface properties through a nano-structuring. Porous ZrV2O7 is...     

Determination of triazine herbicides in aqueous samples by dispersive liquid-liquid microextraction with gas chromatography-ion trap mass spectrometry

A simple and rapid new dispersive liquid-liquid microextraction technique (DLLME) coupled with gas chromatography-ion trap mass spectrometric detection (GC-MS) was developed for the extraction and analysis of triazine herbicides from water samples. In this method, a mixture of 12.0 microL chlorobenzene (extraction solvent) and 1.00 mL acetone (disperser solvent) is rapidly injected by syringe into the 5.00 mL water sample containing 4% (w/v) sodium chloride. In this process, triazines in the water sample are extracted into the fine droplets of chlorobenzene. After centrifuging for 5 min at 6000 rpm, the fine droplets of chlorobenzene are sedimented in the bottom of the conical test tube (8.0+/-0.3 microL). The settled phase (2.0 microL) is collected and injected into the GC-MS for separation and determination of triazines. Some important parameters, viz, type of extraction solvent, identity and volume of disperser solvent, extraction time, and salt effect, which affect on DLLME were studied. Under optimum conditions the enrichment factors and extraction recoveries were high and ranged between 151-722 and 24.2-115.6%, respectively. The linear range was wide (0.2-200 microg L(-1)) and the limits of detection were between 0.021 and 0.12 microg L(-1) for most of the analytes. The relative standard deviations (RSDs) for 5.00 microg L(-1) of triazines in water were in the range of 1.36-8.67%. The performance of the method was checked by analysis of river and tap water samples, and the relative recoveries of triazines from river and tap water at a spiking level of 5.0 microg L(-1) were 85.2-114.5% and 87.8-119.4%, respectively. This method was also compared with solid-phase microextraction (SPME) and hollow fiber protected liquid-phase microextraction (HFP-LPME) methods. DLLME is a very simple and rapid method, requiring less than 3 min. It also has high enrichment factors and recoveries for the extraction of triazines from water.     

Formal synthesis of Cladospolide C & epi-Cladospolide C using R-(+)-γ-valerolactone as a chiral synthon

The formal synthesis of Cladospolide-C and its analog is achieved by using enantiopure (R)-γ–valerolactone 10. The significant points of this synthesis are the stereoselective dihydroxylation of α, β-unsaturated ester 16 using Sharpless protocol, Wittig olefination of γ –valerolactol 6 with triphenylphosphonium iodide salt 7, one pot selective oxidation of 22 and subsequent C2-homologation with good E/Z ratio.     

Simple and Highly Efficient Method for the Deprotection of Allyl Ethers Using Dimethylsulfoxide–Sodium Iodide

A simple and highly efficient method for deprotection of allyl ethers has been developed using dimethylsulfoxide–sodium iodide (catalytic amount). This method is inexpensive, has simple reaction conditions, has an easy workup procedure, proceduces excellent yields (60–99%), and is effective for several structurally varied allyl ethers.     

Development and validation of a reversed-phase HPLC method for monitoring of synthetic reactions during the manufacture of a key intermediate of an anti-hypertensive drug

A reversed-phase high-performance liquid-chromatographic method for monitoring of reactions involved in process development of a key intermediate of antihypertensive drugs, e.g, doxazosin mesylate, prazosin, alfuzosin, terazosin, etc., has been developed and validated. The HPLC profiles of impurities of 4-amino-2-chloro-6,7-dimethoxyquinazoline were used as fingerprints to follow the synthetic procedures in the manufacturing unit. The separation was accomplished on an Inertsil ODS-3 column with isocratic elution using acetonitrile-ammonium acetate (10 mM; pH 4.0; 50:50 v/v) as mobile phase and a photodiode array detector set at 240 nm at ambient temperature. The method was validated with respect to accuracy, precision, linearity, and limits of detection and quantification. The method could detect the impurities at a level of 0.01 to 0.20 microg/mL and it was found to be suitable not only for monitoring of reactions but also for quality assurance of 4-amino-2-chloro-6,7-dimethoxyquinazoline.     

Enhanced energy storage performance of nanocrystalline Sm-doped CoFe2O4 as an effective anode material for Li-ion battery applications

Journal of Solid State Electrochemistry - A simple modified combustion method was demonstrated in the development of cobalt ferrite (CoFe2O4) and samarium (Sm)-doped CoFe2O4 nanostructures. The...     

Novel N-Alkyl-4-(6-fluoro-1H-indol-3-yl)benzamide Derivatives as Anticancer Agents: Design,Synthesis, Biological Evaluation,and Molecular Docking Study

Russian Journal of Organic Chemistry - A number of novel N-alkyl-4-(6-fluoro-1H-indol-3-yl)benzamide derivatives were synthesized and characterized with modern spectroscopic techniques (NMR, IR,...     

Comparative study on formamide–water complex

The hydrogen bonding of 1:1 complexes formed between formamide and water molecule have been investigated systematically using Hartree–Fock (HF), hybrid density functional theory (B3LYP), and post‐Hartree–Fock (MP2 and CCSD(T)) methods with range of basis sets 6‐31G(d), cc‐pVXZ (X = D, T, Q) and aug‐cc‐pVYZ (Y = D, T). Three stable structures are considered on the potential energy surface of formamide and water system. The optimized geometric parameters and interaction energies for various isomers at different levels are estimated. The IR frequencies, intensities, and frequency shifts are reported. This study shows that B3LYP/aug‐cc‐pVDZ method gives better performance for formamide‐water complexes. © 2009 Wiley Periodicals, Inc. Int J Quantum Chem, 2010.     

A Mild and Efficient Synthesis of Novel Isoxazolyl‐Benzo[d]Pyrazino[2,1‐b] [1,3]Oxazoles

Synthesis of novel 2‐3‐methyl‐5‐[(E)‐2‐aryl‐1‐ethenyl]‐4‐isoxazolyl‐4,10a‐diaryl‐1,10a‐dihydro‐2H‐benzo[d]pyrazino[2,1‐b][1,3]oxazoles 5 were simply achieved by the reaction of 2‐[3‐methyl‐5‐[(E)‐2‐aryl‐1‐ethenyl]‐4‐isoxazolyl(2‐oxo‐2‐arylethyl)amino]‐1‐aryl‐1‐ethanones 3 with o‐aminophenol 4 in the presence of CAN catalyst. The intermediates, 2‐[3‐methyl‐5‐[(E)‐2‐aryl‐1‐ethenyl]‐4‐isoxazolyl(2‐oxo‐2‐arylethyl)amino]‐1‐aryl‐1‐ethanones 3 , were prepared by the reaction of 4‐amino‐3‐methyl‐5‐styrylisoxazole 1 , with phenacylbromides 2 in ethanol in the presence of K₂CO₃. The structures of the newly synthesized compounds 3a , 3b , 3c , 3d , 3e , 3f , 3g , 3h , 3i , 3j , 3k , 3l and 5a , 5b , 5c , 5d , 5e , 5f , 5g , 5h , 5i , 5j , 5k , 5l have been confirmed by analytical and spectral data.     

Enantiospecific first total synthesis of (6S,7R)-silphiperfolan-6-ol

Enantiospecific first total synthesis of the angular triquinane sesquiterpene (6S,7R)-silphiperfolan-6-ol has been accomplished, starting from 2-(3-isopropenyl-2-methylene-1-methylcyclopent-1-yl)acetic acid (readily available from (R)-limonene) employing an efficient, regioselective intramolecular rhodium carbenoid insertion into the CH bond of a tertiary methyl group as the key step.