Growth of poly(3,4‐ethylenedioxythiophene) films prepared by base‐inhibited vapor phase polymerization

Transparent [90% transmittance at 550 nm at a sheet resistance (R_s) of 279 Ω sq^?1] poly(3,4‐ethylenedioxythiophene) (PEDOT) films with electrical conductivities up to 1354 S cm^?1 are prepared using base‐inhibited vapor phase polymerization at atmospheric pressure. The influence of reaction conditions, such as temperature and growth time, on the film formation is investigated. A simple and convenient two‐electrode method is used for the in situ measurement of resistance, enabling to investigate the growth mechanism of polymer films and the influence of different parameters (relative humidity and the amount of oxidant) on the film growth. Low humidity exerts a detrimental effect on film growth and conductivity. In situ R_s measurements suggest that a large structural change occurs upon washing the PEDOT‐oxidant film. © 2014 Wiley Periodicals, Inc. J Polym Sci Part B: Polym. Phys. 2014 , 52, 561–571     

Enhanced Photocatalytic Activity of MIL‐125 by Post‐Synthetic Modification with CrIII and Ag Nanoparticles

NH₂‐MIL‐125, [Ti₈O₈(OH)₄(bdc‐NH₂)₆] (bdc^2?=1,4‐benzene dicarboxylate) is a highly porous metal–organic framework (MOF) that has a band gap lying within the ultraviolet region at about 2.6 eV. The band gap may be reduced by a suitable post‐synthetic modification of the nanochannels using conventional organic chemistry methods. Here, it is shown that the photocatalytic activity of NH₂‐MIL‐125 in the degradation of methylene blue under visible light is remarkably augmented by post‐synthetic modification with acetylacetone followed by Cr^III complexation. The latter metal ion extends the absorption from the ultraviolet to the visible light region (band gap 2.21 eV). The photogenerated holes migrate from the MOF’s valence band to the Cr^III valence band, promoting the separation of holes and electrons and increasing the recombination time. Moreover, it is shown that the MOF’s photocatalytic activity is also much improved by doping with Ag nanoparticles, formed in situ by the reduction of Ag⁺ with the acetylacetonate pendant groups (the resulting MOF band gap is 2.09 eV). Presumably, the Ag nanoparticles are able to accept the MOF’s photogenerated electrons, thus avoiding electron–hole recombination. Both, the Cr‐ and Ag‐bearing materials are stable under photocatalytic conditions. These findings open new avenues for improving the photocatalytic activity of MOFs.     

New oxacalix[4]arene carboxylate detects viologen in protic media

ABSTRACT

We demonstrate that Ullman fragment-coupling can be used to synthesise an oxacalix[4]arene monocarboxylic acid, which provides easy access to its water-soluble carboxylato derivatives. Crystallographic and computational data suggest that the new carboxyl-substituted oxacalix[4]arene adopts a 1,3-alternate conformation both in the solid-state and in methanol solution. Its water-soluble tetrabutylammonium derivate can detect the herbicide paraquat at neutral pH in aqueous media (K _a = 111 ± 3 M^–1) and in methanol (K _a = 2020 ± 70 M^–1).     

Ionic composition of seawaters and derived saline solutions determined by ion chromatography and its relation to other water quality parameters

Ion chromatography (IC) presents new possibilities for assessing information about environmental samples, namely waters of various compositions, ranging from high-purity water to highly saline ones. Constant proportion between major ions present in seawater, has been assumed in the past, from which the first practical equation relating chlorinity and salinity has been developed, being later substituted by a practical salinity scale, derived from conductivity measurements relative to a standard seawater, according to internationally accepted recommended procedures. Seawaters are characterized by salinity values around 35 while derived saline solutions may present considerable changes in ionic composition, conductivity, hence on salinity. Natural and anthropogenic phenomena may introduce new issues requiring clarification for which qualitative and quantitative information from additional sources is useful, e.g. ionic composition from IC. The different ranges of concentration of major and minor species present in seawater and derived saline solutions are a challenge for the optimization of a practical methodology for composition assessment in two single IC runs, one for anions and another one for cations, which has been attained in this work. Composition of saline solutions determined by IC was critically assessed in terms of anion-cation balance and further related to conductivity and salinity measurements aiming to evaluate the quality/completeness of ion chromatographic analyses performed at preselected conditions and to search for other meaningful relations for efficient recognition/distinction between saline solutions of different types.     

Comparability of measurement results for pesticide residues in foodstuffs: an open issue?

The dispersion of results from proficiency tests for the analysis of pesticide residues in foodstuffs suggests that improvements in the compatibility of measurement results are needed. Currently observed divergences can make the evaluation conclusion on foodstuffs compliance with certain legislation dependent on the consulted laboratory. This work discusses the origin and impact of this lack of compatibility, following the metrological concepts presented at the latest version of the “International Vocabulary of Metrology” (VIM3), thus allowing for a clear diagnostic of the problem. The reporting of results from different measurement methods uncorrected for the observed analyte recovery makes them traceable to different “operationally defined measurement procedures” (VIM3) and, therefore, not comparable. When results from different measurement methods are reported corrected for analyte recovery, R, and R is different for spiked and incurred residues, measurement results may be not compatible if this effect is not considered on the uncertainty budget. This discussion is illustrated with metrological models for any possible combination of “measurement performance” and “maximum residue level”. These models are complemented with experimental data of the analysis of pesticide residues in a sample of ginseng powder from a proficiency test. The adopted experimental design allowed the identification of additional threats to metrological compatibility in this field. Solutions to the faced problem are discussed for practicability and impact on regulatory issues. The use of a universal “reference measurement procedure” proves to be the most feasible way of ensuring comparability of measurements in this field.     

Oxidation of glycated phosphatidylethanolamines: evidence of oxidation in glycated polar head identified by LC-MS/MS

Phosphatidylethanolamine glycation occurs in diabetic patients and was found to be related with oxidative stress and with diabetic complications. Glycated phosphatidylethanolamines seem to increase oxidation of other molecules; however, the reason why is not understood. In this work, we have studied the oxidation of glycated phosphatidylethanolamines (1-palmitoyl-2-linoleoyl-sn-glycero-3-phosphatidylethanolamine (PLPE) and 1,2-dipalmitoyl-sn-glycero-3-phosphatidylethanolamine (dPPE)) using a Fenton system. Liquid chromatography–electrospray ionization (ESI)–mass spectrometry and ESI–tandem mass spectrometry in both positive and negative modes were used for detecting and identifying the oxidation products. We were able to identify several oxidation products with oxidation in unsaturated sn-2 acyl chain of PLPE, as long- and short-chain products with main oxidation sites on C-7, C-8, C-9, and C-12 carbons. Other products were identified in both glycated PLPE and glycated dPPE, revealing that oxidation also occurs in the glycated polar head. This fact has not been reported before. These products may be generated from oxidation of glycated phosphatidylethanolamines (PE) as Schiff base, leading to short-chain product without the amine moiety, due to cleavage of glycated polar head and long-chain product with two keto groups linked to the glycated polar head or from glycated PE as Amadori product, short-chain products with –NHCHO and –NHCHOHCHO terminal in polar head. Oxidation of glycated phosphatidylethanolamines occurred more quickly than the oxidation of non-glycated phosphatidylethanolamines probably because of the existence of more oxidation sites derived from glycation of polar head group. Monitoring glycated polar head oxidation could be important to evaluate oxidative stress modifications that occur in diabetic patients.     

High-performance liquid chromatography-diode array detection-electrospray ionization multi-stage mass spectrometric screening of an insect/plant system: the case of Spodoptera littoralis/Lycopersicon esculentum phenolics and alkaloids

High-performance liquid chromatography-diode array detection-electrospray ionization multi-stage mass spectrometry (HPLC-DAD-ESI-MS(n)) is considered to be a very valuable tool for the characterization of compounds found in trace amounts in natural matrices, as their previous isolation and clean-up steps can be avoided. Micro-scale separation increases the potential of this analytical technique, allowing the determination of compounds in reduced samples. Spodoptera littoralis represents a major challenge to Solanaceae plants, as it is one of the most deleterious pests. The S. littoralis/Lycopersicon esculentum system was studied for the first time concerning glycoalkaloids and phenolics. Using HPLC-DAD-ESI-MS(n) we were able to characterize 15 phenolic compounds in L. esculentum leaves. Nine of them are reported for the first time. Some differences were found between leaves of cerasiforme and 'Bull's heart' varieties. However, in the materials of S. littoralis (larvae, adults, exuviae and excrements) reared in both L. esculentum leaves no phenolics were identified. α-Tomatine was the main glycoalkaloid in the host plant. The glycoalkaloid composition of the different S. littoralis materials was distinct, with α-tomatine and dehydrotomatine being the main detected compounds in larvae and excrements. These results add knowledge to the ecological interaction in this insect/plant duo, for which it is hard to obtain considerable sample amounts.     

Determination of organophosphorous pesticides in the ppq range using a simple solid-phase extraction method combined with dispersive liquid-liquid microextraction

Solid-phase extraction combined with dispersive liquid-liquid microextraction (SPE-DLLME) was applied for the extraction of six organophosphorous pesticides (OPPs) in water samples. The analytes considered in this study were determined by gas chromatography with mass spectrometry and included prophos, diazinon, chlorpyrifos methyl, methyl parathion, fenchlorphos and chlorpyrifos. Several extraction conditions (extraction solvent and elution/dispersion solvents nature, extraction solvent volume, elution solvent volume, water volume and sample volume) were tested for SPE-DLLME with these analytes and the best results were obtained using carbon tetrachloride as the extraction solvent and acetone as the elution/dispersion solvent. Calibration curves for the determination of OPPs in water samples were constructed in the concentration range of 10-100 ng/L. Limits of detection (LODs) ranged from 38 to 230 pg/L values that are below the maximum admissible level for drinking water (100 ng/L). Relative standard deviations (RSD) were between 8.6 and 10.4% for a fortification level of 100 ng/L. At the same fortification level, the relative recoveries (R.R.) of tap, well and irrigation water samples were in the range of 30.2-97.1%.