Structural, thermodynamic and mechanical properties of Zr-based binary nanowires (ZrCu and Zr2Ni) by molecular dynamics

We present molecular dynamics simulation results of two representative cases of nanowires (NWs) of binary alloys, a glass former (ZrCu) and an alloy that becomes amorphous under chemical substitution of its elements (Zr₂Ni). The simulations were based on semiempirical potential models in analogy to the tight-binding scheme in the second moment approximation. We explored the structural characteristics of NWs of various sizes, and we determined several quantities like melting points, strain–stress curves and Young's modulus. We found that for all NWs, the Zr terminations are energetically favored, while Zr₂Ni NWs adopt rounded cross-sectional shapes and ZrCu, octagonal. From the obtained results, it is established that most of the NW properties differ substantially from those exhibited by their bulk counterparts; e.g., lower melting points and greater yield strengths, while under tensile strain they exhibit clear brittle character. In addition, it is found that their mechanical response to deformation is not very sensitive to the imposed strain rates.     

Micellar and surface properties of a poly(methyl methacrylate)-block-poly(N-isopropylacrylamide) copolymer in aqueous solution

Critical micelle concentrations (cmc) of aqueous solutions of poly(methyl methacrylate)-block-poly(N-isopropylacrylamide) were determined at several temperatures by surface tensiometry. Below the lower critical solution temperature (LCST), the low Delta mic H 0 determined can be assigned to the PMMA block being tightly coiled in the dispersed molecular state, so that the unfavorable interactions of hydrophobic entities with water are minimized. Above the LCST the cmc value was found to increase; an anomalous behavior that can be directly related to the micelle-globule transition of the hydrophilic block. Interestingly, above the LCST the surface tension of relatively concentrated solutions was found to depend weakly on temperature not following the usual strong decrease with temperature expected for aqueous solutions.     

On weak type inequalities for dyadic maximal functions

We obtain sharp estimates for the localized distribution function of the dyadic maximal function , given the local L¹ norms of ? and of G○? where G is a convex increasing function such that G(x)/x→+∞ as x→+∞. Using this we obtain sharp refined weak type estimates for the dyadic maximal operator.     

Comparative study of perturbative methods for computing electron transfer tunneling matrix elements with a nonorthogonal basis set

The authors consider the problem of computing tunneling matrix elements for bridge-mediated electron transfer reactions using the Lowdin [J. Math. Phys. 3, 969 (1962); J. Mol. Spectrosc. 13, 326 (1964)] projection-iteration technique with a nonorthogonal basis set. They compare the convergence properties of two different Lowdin projections, one containing the overlap matrix S and the other containing the inverse S-1 in the projected Hamiltonian. It was suggested in the literature that the projected Hamiltonian with S-1 has better convergence properties compared to the projected Hamiltonian with S. The authors test this proposal using a simple analytical model, and ab initio Hartree-Fock calculations on different molecules with several types of basis sets. Their calculations show that, for Gaussian-type basis sets, the projected Hamiltonian containing S has the best convergence properties, especially for diffuse basis sets and in the strong coupling limit. The limit of diffuse basis sets is relevant to tunneling matrix element calculations involving excited states and anionic electron transfer.     

Mushroom Polysaccharides and Lipids Synthesized in Liquid Agitated and Static Cultures. Part I: Screening Various Mushroom Species

The effect of four synthetic media containing glucose (initial concentration 30?g?l^?1) on mycelial growth, exopolysaccharides (EPS) and cellular lipids production was examined in 11 mushroom species after 12 and 16?days of culture in static- and shake-flasks. Fatty acid analysis of cellular lipids produced was also performed. Agitation had a positive effect on biomass production, glucose consumption and lipid biosynthesis. Media that favoured the production of biomass were not suitable for EPS biosynthesis and vice versa. Biomass values varied from ??1.0?g?l^?1 (Lentinula edodes) to ??19?g?l^?1 (Pleurotus ostreatus), while the highest EPS quantity achieved ranged between 1.6 and 1.8?g?l^?1 (for Ganoderma lucidum and L. edodes, respectively). Quantities of total cellular lipids varied between 2.5 and 18.5?% w/w, in dry mycelial mass for the fungi tested. Lipid in dry weight values were influenced by the medium composition. Cellular lipids presented noticeable quantities of poly-unsaturated fatty acids like linoleic acid. Compared to most of the mushrooms tested, lipids of Volvariella volvacea were more saturated. The ability of several mushroom species of our study to produce in notable quantities the above-mentioned added-value compounds renders these fungi worthy for further investigations.     

Complex Salts of Lanthanide(III) Nitrates from Di­pyridylamine: Preparation,Structural, and Thermoanalytical ­Investigation

The reaction of a lanthanide(III) nitrate (Ln = Pr, Nd) with the base 2, 2′‐dipyridylamine (dpamH) afforded two very stable microcrystalline compounds. These compounds were characterized as complex salts with the general formula [Ln(NO₃)₆] · 3[dpamH‐H⁺] · H₂O, where the dpamH ligand is not coordinated, but exists in its protonated form serving as counterion (dipyridylammonium cation), as it was revealed by single‐crystal X‐ray diffraction studies. Each one of the nitrate ions is coordinated, however, in a bidentate manner with the lanthanide(III) ion, which obtains coordination number twelve. All organic dpamH‐H⁺ cations are arranged in two columns parallel to the a axis of the cell forming pairs of almost parallel cationic molecules at a distance of about 3.5 Å. Inside each pair the molecules interact by strong π–π interactions. The water molecules, arranged between the inorganic anions [Ln(NO₃)₆]^3–, bridge them by strong hydrogen bonds, involving the water proton and one nitrate oxygen. The lattice can be described as made from successive organic and inorganic alternating parallel columns interacting between them with strong hydrogen bonds. The thermal stability and decomposition mode of the two lanthanide compounds were studied by the simultaneous TG/DTG‐DTA technique and compared with the starting hexahydrate lanthanide(III) salts and the dipyridylamine.     

In Vitro and In Vivo Enzyme‐Mediated Biomineralization of Oligo(poly(ethylene glycol) Fumarate Hydrogels

The enzyme alkaline phosphatase (ALP) is added at different concentrations (i.e., 0, 2.5, and 10 mg · ml^?1) to oligo(poly(ethylene glycol)fumarate) (OPF) hydrogels. The scaffolds are either incubated in 10 mM calcium glycerophosphate (Ca–GP) solution for 2 weeks or implanted in a rat subcutaneous model for 4 weeks. Fourier transform infrared (FTIR) spectroscopy, X‐ray diffraction (XRD), scanning electron microscopy (SEM), energy dispersive spectroscopy (EDS), and alizarin red staining show a strong ability to form minerals exclusively in ALP‐containing hydrogels in vitro. Additionally, the calcium content increases with increasing ALP concentration. Similarly, only ALP‐containing hydrogels induce mineralization in vivo. Specifically, small (≈5–20 µm) mineral deposits are observed at the periphery of the hydrogels near the dermis/scaffold interface using Von Kossa and alizarin red staining.

     

Development of an impedimetric immunosensor based on electropolymerized polytyramine films for the direct detection of Salmonella typhimurium in pure cultures of type strains and inoculated real samples

The development of a faradic impedimetric immunosensor based on electropolymerized polytyramine (Ptyr) films for the detection of S. typhimurium in milk is described for the first time. Polyclonal anti-Salmonella was cross-linked, in the presence of glutaraldehyde vapors, on Ptyr-modified gold electrodes. The dielectric behaviour of Ptyr films was evaluated with capacitance measurements, while their stability in neutral aqueous solutions was examined with impedimetric measurements. The effect of the concentration of tyramine in the forming solution on both the sensitivity and the dynamic range of the resulted immunosensors was also investigated. The alteration of the interfacial features of the electrodes due to different modification or recognition steps, was measured by faradic electrochemical impedance spectroscopy in the presence of a hexacyanoferrate(II)/(III) redox couple. At samples containing a low initial concentration of 10 cfu mL⁻¹S. typhimurium, that actually defines the LOD of the immunosensors, signal changes of 33% and 88% were achieved after 3 and 10 h incubation, respectively. To achieve the working simplicity expected by a biosensor, immunoreaction was performed directly in cultures. This resulted in the elimination of various centrifugation and washing steps, which are used for the isolation of bacteria cells from the culture, thus making the proposed immunosensors promising candidates for on-site applications. Finally, the proposed immunosensors were successfully used for the detection of S. typhimurium in experimentally inoculated milk samples.     

Sharp general local estimates for dyadic-like maximal operators and related Bellman functions

For each 1?q<p we precisely evaluate the main Bellman functions associated with the local Lp→Lq estimates of the dyadic maximal operator on Rn. Actually we do that in the more general setting of tree-like maximal operators and with respect to general convex and increasing growth functions. We prove that these Bellman functions equal to analogous extremal problems for the Hardy operator which can be viewed as a symmetrization principle for such operators. Under certain mild conditions on the growth functions we show that for the latter extremals exist (although for the original Bellman functions do not) and analyzing them we give a determination of the corresponding Bellman function.