Full verification of the liquid exclusion-adsorption chromatography theory using monolithic capillary columns

Capillary electrochromatography (CEC) was used to separate alkyl phenol ethoxylates (APEs) as model diblock copolymers, with monolithic polymers as stationary phases. The order of elution indicate that the two polymer blocks follow distinct chromatographic modes: size-exclusion for the poly(oxyethylene) group and adsorption interaction for the alkyl part. Therefore, our experimental results were compared to the theory describing liquid exclusion-adsorption chromatography (LEAC). They were found in perfect agreement with the theory, which turned to be verified for the first time over the full range of polymer lengths.     

Amide-water interactions in cosolvent systems. I. Solubilities and apparent molar volumes of methyl paraben

Solubility and apparent molar volume data are used to demonstrate effects of amide alkylation on amide-water interactions at 25° C. Precise measurements were made of the apparent molar volumes of the amides in binary amide-water mixtures using a dilatometric technique. The results show that the apparent molar volumes of alkyl-substituted amides in water pass through a minimum at an amide concentration which varies inversely with the degree of alkylation. Further studies showed that the solubilities of methyl paraben (methyl-p-hydroxybenzoate) and naphthalene in various amide-water solvent systems increased in characteristic fashion with amide alkylation.     

Convenient synthesis of nucleoside and isonucleoside analogues

[reaction: see text]. A very simple methodology to stereoselectively achieve tricyclic isonucleosides (nucleobase = thymine, uracil, and 5-fluoruracil) and 3'-C-branched nucleosides (nucleobase = theophylline) was performed by means of a DBU-mediated addition process using a readily available 2-bromo sugar. The mechanism for these transformations implies the loss of both substituents at C-2 and C-3 on the sugar moiety, and although it seems that DBU is probably involved, its involvement has not yet been ascertained. Cytosine did not react under these conditions.     

5,6-dihydroxyindole-2-carboxylic acid by treatment of sepiomelanin with sodium borohydride.

Mild treatment of sepiomelanin and biosynthetic eumelanins with NaBH₄ in 0.1 N NaOH leads to the isolation of 5,6-dihydroxyindole-2-carboxylic acid ($\text{3}$), a component of structural interest which may account for most of the degradation products of melanins so far obtained.     

DNase activity ofMicrococcal endonuclease insolubilized on corn cob

The endonuclease from S. aureus has been immobilized on ground maize cob, previously activated with tosyl chloride. Pretreatment of the support on acid before tosylation yielded the best insoluble enzyme derivatives. The catalytic activity has been evaluated as percent of total hydrolysis attained in a batch reactor using DNA as a model substrate. The derivatives prepared are very resistant to high temperatures under conditions of catalysis (24 h at 45 degrees C). For these long reaction times, the extent of hydrolysis in the presence of small amounts of organic solvent (dimethyl sulfoxide at 2 percent) is larger than in plain buffer (Tris). This type of derivative could be very useful for the removal of nucleic acids from single-cell protein concentrates.     

Quantum chemical predictions concerning two unknown “mesoionic” compounds

The Pariser-Parr-Pople approximation was used to predict the properties of compounds I, 3-oxo-2H-1,2,3-triazolo[3,4-a]pyridine, and II, 3-oxoisoxazolo[2,3-a]pyridine, originated by joining a pyridine ring to two sydnone-like heterocyclic systems not yet reported in the literature. A parallel computation was carried out for two known compounds of similar structure, to give the predictions a better reliability through the comparison with observed spectral data and chemical behaviour. Compound I is expected to be stable, with an absorption spectrum similar to III, 2-oxo-1,3,4-oxadiazolo[4,5-a]pyridine, and chemical properties analogous to IV, 1-methyl-3-oxo-1,2,4-triazolo-[4,3-a]pyridine. A reaction path is suggested for obtaining from I the unknown isomeric structure V, 3-oxo-1H-1,2,3-triazolo[3,4-a]pyridine. Compound II is predicted as an unstable orange-red substance which should be handled and kept at low temperatures.     

Synthesis of monobutyrylglycerol by transesterification with soluble and immobilized lipases

Transesterification between ethyl butyrate and glycerol using very different lipase preparations (native, modified, and immobilized) in a two-phase system—no extra solvent added—has been investigated. Optimal conversion was obtained with the presence of 5% water in the reaction mixture. Only monobutyrin was produced in all conditions tested. The best enzyme preparations were nativeCandida cylindracea lipase,Mucor miehei lipase immobilized on a phenol-formaldehyde exchange resin (Lipozyme?), andC. cylindracea lipase immobilized on Celite.     

Die potentiometrische Mikrobestimmung von Kupfer in organischen Verbindungen nach Verbrennung in einem modifizierten Schöniger-Kolben

Zusammenfassung Nach Verbrennung der Substanz in einem modifizierten Sauerstoffkolben werden die Verbrennungsprodukte in 2,5 ml 8M HNO₃ absorbiert; das gebildete CuO wird vom Pt-Netz durch eine spezielle Technik vollständig gelöst. Nach dem Erkalten wird die Lösung in die Titrationszelle übertragen, mit NaOH in Gegenwart von Phenolphthalein neutralisiert und das Cu(II) schließlich in gepufferter Lösung mit 0,01N Cyanoferrat(II) potentiometrisch titriert. Eine kupferselektive Elektrode und eine Single-Junction-Referenzelektrode dienen in Kombination mit einem pH-Meter mit gedehnter Skala zur Erkennung des Titrationsendpunktes. Die Resultate sind innerhalb ±0,10% genau: die Wiederfindungsrate von Kupfer liegt zwischen 99,65 und 100,10%; die Standardabweichung beträgt 0,04%. Die Bedingungen und die Charakteristiken der Titration von Cu(II) mit Cyanoferrat(II) ebenso wie die Störung einiger Anionen werden diskutiert. Der beschriebene modifizierte Verbrennungskolben eignet sich zur Mikrobestimmung auch anderer Elemente in metallorganischen Verbindungen.

---

Potentiometric microdetermination of copper in organic compounds after combustion in a modified schöniger's flask

Summary After combustion of the sample in a modified oxygen flask, the combustion products are absorbed in 2,5 ml 8M HNO₃ and the CuO formed is completely dissolved from the Pt-basket by a special technique. After cooling, the solution is transferred to the titration cell and neutralized with NaOH in the presence of phenolphthalein; the copper(II) is finally titrated potentiometrically in a buffered medium with 0,01N hexacyanoferrate (II). A copper-selective electrode and a single junction reference electrode are used in combination with an expanded-scale pH-meter to detect the endpoint. The results obtained are very accurate and reproducible: the max. error does not exceed 0.10% (abs.), the recoveries of copper range from 99.65 to 100.10% and the standard deviation is 0.04%. Conditions and features of the titration of copper(II) with hexacyanoferrate(II) as well as the effect of some interfering anions are discussed. The modified oxygen flask described is also useful for the microdetermination of other elements in organometallic compounds.

     

Reductive cleavage of axially disymmetric tertiary amines and quaternary ammonium salts by lithium aluminium hydride. Synthesis of new 1,1′-binaphthyl substituted amines

Axially disymmetric tertiary amines or quaternary ammonium salts $\text{A}$ are synthesized by double alkylation of primary or secondary amines with racemic or optically pure 2,2′-bis (bromomethyl)-1,1′-binaphthyl. Their reductive cleavage by lithium aluminium hydride in refluxing THF leads to chiral secondary or tertiary amines $\text{B}$, substituted by a binaphthyl unit, with high yields and absence of racemization.     

Anodic oxidation mechanism of 3-arylaminoindoles at a rotating and at a (new type of) pulsing platinum electrode in dipolar aprotic solvents

The oxidation of 2-phenyl-3-arylaminoindoles (1a–e) has been studied in acetonitrile, dimethylformamide and propylene carbonate at a new type of platinum electrode with periodical renewal of the diffusion layer and at a rotating platinum electrode by cyclic voltammetry, d.c. and a.c. voltammetry, controlled potential coulometry and spectrometry (e.s.r. and u.v.). In the examined aprotic solvents and in the presence of a base (like water or diphenylguanidine) amines 1a–e undergo a two-electron oxidation to the corresponding imines. In a protophobic medium (acetonitrile or propylene carbonate) 1a–e are oxidized in two one-electron steps, the first of which leads to the formation of a cation radical (identified by e.s.r. spectrum), oxidizable at more positive potentials (second step). The second electron transfer, however, must be simultaneous with, or be immediately followed by, a very fast deprotonation reaction. The same e.e.c. sequence explains the observed bielectronic step of 1a–e in a protophilic aprotic solvent, like dimethylformamide.