N‐(Ferrocenecarbonyl)‐N′‐(quinolin‐8‐yl)thio­urea

In the title compound, [Fe(C₅H₅)(C₁₆H₁₂N₃OS)], the 8‐am­inoquinoline and acyl­thio­urea moieties are almost planar. There are two perpendicular arrangements of the mol­ecules in the crystal with slightly different conformations. The two cyclo­penta­dienyl rings in each mol­ecule are parallel and eclipsed.     

Fused 1,2‐Dithioles. Part VII

The 1,2‐dithiolosultam derivative 14 was obtained from the (α‐bromoalkylidene)propenesultam derivative 9 (Scheme 1). Regioselective cleavage of the two ester groups (→ 1b or 2b ) allowed the preparation of derivatives with different substituents at C(3) in the dithiole ring (see 27 and 28 ) as well as at C(6) in the isothiazole ring (see 17 – 21 ; Scheme 2). Curtius rearrangement of the 6‐carbonyl azide 21 in Ac₂O afforded the 6‐acetamide 22 , and saponification and decarboxylation of the latter yielded ‘sulfothiolutin’ ( 30 ). Hydride reductions of two of the bicyclic sultams resulted in ring opening of the sultam ring and loss of the sulfonyl group. Thus the reduction of the dithiolosultam derivative 14 yielded the alkylidenethiotetronic acid derivative 33 (tetronic acid=furan‐2,4(3H,4H)‐dione), and the lactam‐sultam derivative 10 gave the alkylidenetetramic acid derivative 35 (tetramic acid=1,5‐dihydro‐4‐hydroxy‐2H‐pyrrol‐2‐one) (Scheme 3). Some of the new compounds ( 14, 22, 26 , and 30 ) exhibited antimycobacterial activity. The oxidative addition of 1 equiv. of [Pt(η²‐C₂H₄)L₂] ( 36a , L=PPh₃; 36b , L=1/2 dppf; 36c , L=1/2 (R,R)‐diop) into the S? S bond of 14 led to the cis‐(dithiolato)platinum(II) complexes 37a – c . (dppf=1,1′‐bis(diphenylphosphino)ferrocene; (R,R)‐diop={[(4R,5R)‐2,2‐demithyl‐1,3‐dioxolane‐4,5‐diyl]bis(methylene)}bis[diphenylphosphine]).     

Single‐electron‐transfer/degenerative‐chain‐transfer mediated living radical polymerization of vinyl chloride catalyzed by thiourea dioxide/octyl viologen in water/tetrahydrofuran at 25 °C

The single‐electron‐transfer/degenerative‐chain‐transfer mediated living radical polymerization (SET–DTLRP) of vinyl chloride (VC) in H₂O/tetrahydrofuran at 25 °C catalyzed by thiourea dioxide [(NH₂)₂C?SO₂] is reported. This polymerization occurs only in the presence of a basic sodium bicarbonate (NaHCO₃) buffer and the electron‐transfer cocatalyst octyl viologen. The resulting poly(vinyl chloride) (PVC) has a number‐average molecular weight of 1500–7000 and a weight‐average molecular weight/number‐average molecular weight ratio of 1.5. This PVC does not contain detectable amounts of structural defects and has both active chloroiodomethyl and inactive chloromethyl chain ends. Because of possible side reactions caused by the primary sulfoxylate anion (SO), the catalytic activity of (NH₂)₂C?SO₂ in the SET–DTLRP of VC is lower than that of the single‐electron‐transfer agent sodium dithionite. © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 43: 287–295, 2005     

Analysis of B3LYP and MP2 conformational population distributions in trans‐nicotine,acetylcholine, and ABT‐594

This work presents an analysis of the equivalence of MP2 and DFT (B3LYP functional) conformational populations. As a test case, we select three cholinergic agents (trans‐nicotine, acetylcholine, and the nicotinic analgesic ABT‐594), where the minima on the conformational energy hypersurfaces expand a large range of energies (～0–30 kJ mol^?1). From energetic and structural data obtained in vacuo at the MP2 and B3LYP/cc‐pVDZ levels, we build conformational partition functions, including the effect of the conformational kinetic energy and the rotovibrational coupling. Our results at a physiological temperature (37°C) show qualitative agreement in all cases. Quantitative agreement, however, is only found for trans‐nicotine and ABT‐594. In the first case, energy minima differ by <0.2 kJ mol^?1. Therefore, the equivalence of structural results translates in the equivalence of the conformational distribution. For ABT‐594, the minima are separated by as much as 8.0 kJ mol^?1, and the conformational energy determines the conformational distribution. In this case, the slight relative variation of conformational energy, between B3LYP and MP2, does not affect the population, since the secondary minima are high in energy and very low in population. © 2005 Wiley Periodicals, Inc. Int J Quantum Chem, 2005     

Stericaliy Congested Molecules: 2,2′-[(Biaryldiyl)bis(oxy)]bis[1,3,2-oxazaphospholidines]

The original suggestion that a through-space mechanism was operative in the seven-bond J(P, P) coupling constant of 30.3 Hz observed for 3.3′-bis(1,1-dimethylethyl)-2,2′-[3,3′,5,5′-tetrakis(1,1-dimethylethyl)-1,1′-biphenyl-2,2′-diyl]bis(oxy)}bis[1,3,2-oxazaphospholidine] ( 1a )) was investigated. In the solid-state CP-MAS ³¹PNMR spectrum of 1a , two nonequivalent P -atoms were observed; sufficient resolution could not be obtained to determine whether P, P coupling was present. The preparation and spectral data of the N-methyl analogue 1b and of the acyclic N-isopropyl analogue 6 (Scheme 1) provided evidence that a) the essentially exclusive formation (R*, R*,S*)- 1a in the reaction of the disodium biphenyldiolate 3a with the phosphorochloridite 4a is the result of significant differences in the free energy of activation (ΔG*) for the formation of the various diastereoisomers due to the steric congestion within the molecule and that b) the magnitude of the observed P,P coupling is dependent upon the degree of conformational freedom within the molecule. In the ³¹P-NMR spectrum of the P-sulfide 7 , which was prepared by the reaction of la with sulfur, 2s resonances were observed that strongly suggested that the lone electrons pair on P are involved in the mechanism for the transmission of coupling data. The (4S,5R) -12 and (4R, 5S) -12 of la were prepared in a three-step reaction sequence starting from the corresponding enantiomerically pure norephredine 8 (Scheme 2). Both (4S, 5R)- and (4R, 5S) -12 were obtained as a diastereoisomer mixture that differ by the configuration of the axis of chirality, i.e., (R*R*,R*)- and (R*,S*,R*) -12 were obtained. The major diastereoisomer was obtained upon recrystallization, and the atropisomers were observed to equilibrate in solution by monitoring the H? C(5) resonance in the ¹H-NMR with time (ΔG° = 0.4 kcal/mol; Fig. 2). The process observed corresponds to the restricted rotation about the central single bond of the biphenyl system. The isolation of an atropisomer with only a single ortho substituent on each aryl ring is quite rare. In the ¹³C-NMR spectrum of both (R*,R*,R*)- and (R*,S*,R*) -12 , C(5) is two-bond-coupled to the oxazaphospholidine P-atom (²J(C(5),P((2)) = 8.5 Hz) that is further virtually coupled to the P-atom of the other oxazaphospholidine ring (7J(P(2),P(2′)) = 30 Hz; ⁹J(C(5),P(2′)) = 0 Hz; δ(P(2)) = δ(P(2′)) = 136 ppm. In the ³¹P-NMR spectrum of (R*,R*,S*) -12 , which was prepared from the racemic chloridite (mixture of three diastereoisomers was obtained), a ⁷J(P(2),P(2′) of 36 Hz was observed. These observations provide strong evidence that seven-bond P,P coupling occurs in all three diastereoisomers of 12 . The observed P,P coupling is both independent of the configuration of the chiral axis and the configuration of the asymmetric P-centers. This independence of P,P coupling upon the configuration on P implies also the independence of the observed coupling upon the orientation of the lone-pair of electrons on P provided that the conformations of the diastereoisomers are similar in solution. The X-ray crystal structure of the complex formed from 1a and dichloro(cycloocta-1,5-diene)platinum(II) was obtained and the solid-state structure discussed. The major diastereoisomer of (4S,5R) -12 was used as a chiral ligand in asymmetric hydrosilylation and hydrogenation reactions (Scheme 3).     

Synthesis of 32‐phenyl‐substituted methyl E/Z‐pyropheophorbide‐a's from methyl E/Z‐pyropehophorbide‐a 131‐ketoximes

Methyl E/Z‐pyropheophorbide‐a 13¹‐ketoximes 2a,b and their O‐acetyl derivatives 3a,b were oxidized with osmium(VIII) oxide to give aldehydes 4a,b and 5a,b , respectively. The Wittig reactions of the aldehyde chlorines 4a,b and 5a,b with benzyltriphenylphosphonium chloride were performed to form the corresponding methyl (3¹E/Z,13¹E/Z)‐3²‐phenylpyropheophorbide‐a 13¹‐ketoximes 6aa‐bb and their O‐acetyl derivatives 7aa‐bb ; hydrolysis of these ketoximes 6aa,ba and 6ab,bb in formic acid produced methyl (E/Z)‐3²‐phenylpyropheophorbide‐a's 8a,b .     

Synthesis and Characterization of [(1,4‐diamine)dichloro]platinum(II) Compounds Preliminary Studies on their Biological Activity

Two 1,4‐diamine ligands were synthesized having 1,2‐bis(aminomethyl)‐cyclohexane and 1,2‐bis(aminomethyl)‐benzene structures. The two ligands have different electron density in the six‐membered ring: a cyclohexane versus a phenyl ring. The organic synthesis of the ligands was carried out by synthetic pathways of seven and four steps, respectively, starting from 1,2,3,6‐tetrahydrophthalic anhydride and diethyl phthalate. The coordination of platinum to these ligands afforded platinum(II) complexes which are analogue to the clinical drug cisplatin but form a seven‐membered chelate ring. The interaction of the platinum compounds with DNA was studied in order to know the relationship between the electron density of ligands and their capability to chelate DNA, by using three techniques: Circular Dichroism, Agarose Gel Electrophoresis and Atomic Force Microscopy. The degree of interaction of both compounds with DNA was slightly different, but both complexes showed a cisplatin‐like behaviour and are promising candidates to follow an extensive study of their cytotoxic activity.     

Symmetry numbers and chemical reaction rates

This article shows how to evaluate rotational symmetry numbers for different molecular configurations and how to apply them to transition state theory. In general, the symmetry number is given by the ratio of the reactant and transition state rotational symmetry numbers. However, special care is advised in the evaluation of symmetry numbers in the following situations: (i) if the reaction is symmetric, (ii) if reactants and/or transition states are chiral, (iii) if the reaction has multiple conformers for reactants and/or transition states and, (iv) if there is an internal rotation of part of the molecular system. All these four situations are treated systematically and analyzed in detail in the present article. We also include a large number of examples to clarify some complicated situations, and in the last section we discuss an example involving an achiral diasteroisomer.     

A Clean Synthesis of 1,4‐Diarylquinoline Derivatives Catalyzed by TEBAC in Aqueous Media

A series of 1,4‐diarylquinoline derivatives were synthesized by the reaction of arylmethylidenemalononitriles or 2‐cyano‐3‐aryl‐1‐acrylate and 3‐arylamino‐5,5‐dimethylcyclohex‐2‐enone in aqueous media at 100 °C catalyzed by TEBAC. Meanwhile, the water medium was chosen as green solvent.     

Synthesis and characterization of macrocyclic vinyl aromatic polymers

The synthesis and characterization by size exclusion chromatography, liquid chromatography, NMR, matrix‐assisted laser desorption/ionization, thermal analysis, and other techniques of well‐defined and narrow molecular weight distribution macrocyclic polystyrene (PS), poly(2‐vinylpyridine), poly(α‐methylstyrene), poly (2‐vinyl‐naphthalene) (P2VN), and poly(9,9‐dimethyl‐2‐vinylfluorene) (PDMVF) containing a single 1,4‐benzylidene, methylidene, or 9,10‐anthracenylidene unit are reviewed. The absorption and emission spectroscopy of PS, P2VN, and PDMVF is also discussed. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 2139–2155, 2006